PASSIVE POWER FACTOR CORRECTION INDUCTORS P1900 SERIES • Designed for use in off-line AC-DC pre-regulators circuits for switching power converters applications • Low core loss and high flux density • Insulation class system: B (130°C), F (155°C) or H(180°C) • Dielectric Withstanding Voltage (DWV): 2KVRMS • Operating Temperature: -20°C to +105°C • RoHS Compliant Product • Custom Design Available ELECTRICAL PARAMETERS @ 25°C Part Number L (μH MIN)1 Terminal3 (S-F) DCR (mΩ MAX)1, 2 I @ 80% L (ADC) I @ 65% L (ADC) I @ 50% L (ADC) Pins Dia. (Ø AWG) LxWxH (in. MAX) PCB Mounting Layout P19000 52 2-5 11 34.22 56.00 77.77 12 x 2 2.65x1.15x2.70 V / Fig. 1 P19001 60 2-6, 3-5 8 33.18 54.30 75.42 12 x 2 2.80x1.35x2.80 V / Fig. 1 P19002 111 2-6, 3-5 14 24.33 39.82 55.31 13 x 2 2.80x1.35x2.80 V / Fig. 1 P19003 135 2-5 17 21.90 35.84 49.78 14 x 2 2.65x1.20x2.70 V / Fig. 1 P19004 146 2-5 22 21.06 34.46 47.86 14 x 2 2.65x1.20x2.70 H / Fig. 1 P19005 149 2-6, 3-5 21 21.06 34.46 47.86 14 x 2 2.80x1.20x2.80 V / Fig. 1 P19006 198 2-5 24 18.25 29.87 41.48 14 x 2 2.65x1.20x2.70 V / Fig. 1 P19007 241 2-5 28 16.59 27.15 37.71 12 2.65x1.20x2.70 V / Fig. 1 P19008 291 2-5 53 14.80 24.22 33.63 12 2.80x1.20x2.80 V / Fig. 1 P19009 400 1-5, 2-4 120 10.61 17.36 24.11 14 2.50x1.20x2.65 V / Fig. 1 P19010 437 2-5 55 12.17 19.91 27.65 13 2.80x1.20x2.80 V / Fig. 1 P19011 437 1-2 55 12.17 19.91 27.65 13 2.70x2.70x1.15 V / Fig. 4 P19012 495 1-5, 2-4 118 11.17 18.28 25.40 13 2.70x1.20x2.70 V / Fig. 3 P19013 508 2-5 90 11.40 18.60 26.00 13 2.65x1.15x2.70 V / Fig. 1 P19014 818 1-5, 2-4 95 7.54 12.34 17.14 15 2.86x1.32x2.80 V / Fig. 3 P19015 1620 1-5, 2-4 241 6.33 10.36 14.39 16 2.65x1.10x2.80 V / Fig. 2 P19016 1989 2-5 286 5.70 9.33 12.96 16 2.65x1.10x2.80 V / Fig. 2 P19017 1989 1-5, 2-4 270 5.70 9.33 12.96 16 2.65x1.10x2.80 V / Fig. 2 Note: 1. Test conditions: 10KHz, 1VRMS. 2. Combined resistance of the “x2” winding. 3. Only those assigned terminals will have the self-lead pins. Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043 Fax: 310-325-1044 www.mpsind.com [email protected] PASSIVE POWER FACTOR CORRECTION INDUCTORS P1900 SERIES DIMENSIONS (mm) SCHEMATICS VERTICAL L W Figure 1 0.60 [15.24] H 0.18 [4.57] 1.00 [25.40] P19XXXMPSDC 1 2 Figure 2 1.20 [30.48] 0.25 [6.35] 6 5 4 1 2 3 6 5 4 1.00 [25.40] 2.00 [50.80] S F Ø AWG HORIZONTAL Figure 3 Figure 4 1.575 [40.005] L&W P19XXXMPSDC 2 1 H 1.00 [25.40] 0.20 [5.08] 6 5 4 1 2 3 1.375 [34.925] 2.00 [50.80] 0.85 [21.59] ØL 0.984 [25.000] Typ. 2 1 0.20 [5.08] Typ. Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043 Fax: 310-325-1044 0.85 [21.59] 1 2 3 2.00 [50.80] 3 0.18 [4.57] 0.85 [21.59] 0.50 [12.70] Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X,X : ±0,38 X,XX : ±0,10 www.mpsind.com [email protected]