LED - Meanwell

Installation Manual
 Type：LED Power Supply
（Families：APC, APV, CEN, CLG, ELN, GSC, HBG, HLG, HLN, HLP, HSG, HVG, LCM, LPC, LPF, LPH, LPHC,
LPL, ,PLC, LPV, NPF, OWA, PCD, PLC, PLD, PLM, PLN, PLP, PWM, ULP）
 Introduction
The LED power supply is a dedicated LED driving device that delivers a constant current/voltage or generates an
adjustable current controlled by an external dimmer to LEDs. Depending on its types or design concept, some of
them not only have PFC capability but also can be located in a harsh environment such as dusty, humid places.
Mean Well’s LED power supplies include metal case, plastic case, and PCB types.
 Installation
（1）Before commencing any installation or maintenance work, please disconnect the power supply from the utility.
Ensure that it cannot be re-connected inadvertently!
（2）Keep proper ventilation around the unit and do not stack any object on it. Also a 10-15 cm clearance must be
kept when the adjacent device is a heat source.
（3）Mounting orientations other than standard orientation or operate under high ambient temperature may
increase the internal component temperature and will require a de-rating in output current. Please refer to
the specification sheet to receive the optimum mounting position and information about the de-rating curve.
（4）Current rating of an approved primary /secondary cable should be greater than or equal to that of the unit.
Please refer to its specification.
（5）For LED power supplies with waterproof connectors, verify that the linkage between the unit and the lighting
fixture is tight so that water cannot intrude into the system.
（6）For dimmable LED power supplies, make sure that your dimming controller is capable of driving
these units. For ELN series, either “D” or “P” type, require 40mA each unit; for those with “3 in 1” dimming
function, e.g. HLG and LPF series, require 0.15mA each unit.
（7）Wiring: The wire color will vary by country, please refer to the table below.
North America
European Harmonized
Live and ACL
Black
Brown
Neutral and ACN
white
Blue
PE and FG (Class I only)
Green
Green/yellow
（a）Connect the FG wire (green or green/yellow) of the LED power supply to PE (green or green/yellow), this
step can be skipped when the unit is marked class II, ungrounded.
（b）Connect the ACL wire (black or brown) of the LED power supply to Live (black or brown).
（c）Connect the ACN wire (white or blue) of the LED power supply to Neutral (white or blue).
Installation Manual
（8）The maximum number of the LED PSUs that can be connected to a circuit breaker at 230V is shown as below.
Model
APC-12
APC-16
APC-25
APC-35
APV-12
APV-16
APV-25
APV-35
CEN-60
CEN-75
CEN-100
CLG-60
CLG-100
CLG-150
ELN-30
ELN-60
GSC18
GSC25
GSC40
HBG-60
HBG-100
HBG-160
HBG-240
HLG-40H
HLG-60H
HLG-80H
HLG-100H
HLG-120H
HLG-150H
HLG-185H
HLG-240H
HLG-320H
HLG-600H
HLG-60H-C
HLG-80H-C
HLG-120H-C
HLG-185H-C
HLN-40H
HLN-60H
HLN-80H
B10
11
8
5
3
11
8
5
4
20
16
11
20
1
1
3
2
26
26
22
18
3
2
1
7
6
2
3
3
2
2
1
1
1
5
3
2
1
7
6
2
B16
17
13
9
5
17
13
9
6
32
25
19
32
3
3
4
3
42
42
36
28
4
4
2
12
9
3
4
5
4
4
2
1
1
8
4
4
2
12
9
3
C10 C16 D10 D16
18
29
37
59
14
23
28
46
9
15
18
30
6
9
12
19
18
29
37
59
14
22
28
44
9
15
18
30
6
10
13
21
20
32
20
32
16
25
16
25
11
19
11
19
20
32
20
32
3
5
6
10
3
5
6
10
5
8
10
16
3
5
7
11
26
42
26
42
26
42
26
42
22
36
22
36
20
32
20
32
5
8
10
16
4
7
8
12
2
3
4
7
13
20
26
41
10
16
20
32
3
6
7
12
5
8
10
16
5
9
10
17
4
7
8
13
4
7
6
11
3
4
5
8
1
2
3
5
1
2
2
3
8
13
16
26
5
8
10
16
4
6
8
13
2
3
4
7
13
20
26
41
10
16
20
32
3
6
7
12
Installation Manual
Model
HLP-40H
HLP-60H
HLP-80H
HSG-70
HVG-65 (480V)
HVG-100 (480V)
HVG-150 (480V)
HVGC-65 (480V)
HVGC-100 (480V)
HVGC-150 (480V)
LCM-25DA
LCM-40
LCM-40DA
LCM-60
LCM-60DA
LPC-20
LPC-35
LPC-60
LPC-100
LPC-150
LPF-16
LPF-16D
LPF-25
LPF-25D
LPF-40
LPF-40D
LPF-60
LPF-60D
LPF-90
LPF-90D
LPH-18
LPHC-18
LPL-18 (115V)
LPLC-18 (115V)
LPV-20
LPV-35
LPV-60
LPV-100
LPV-150
NPF-40
NPF-40D
NPF-60
B10
7
6
2
4
7
3
2
7
3
2
16
16
15
15
15
5
2
2
1
2
9
9
8
8
7
7
5
5
2
2
10
8
10
7
5
2
2
1
1
6
6
6
B16
12
9
3
6
12
5
4
12
5
4
26
26
26
25
25
8
4
3
1
3
14
14
12
12
12
12
8
8
4
4
17
13
16
12
8
4
3
2
2
9
9
9
C10 C16 D10 D16
13
20
26
41
10
16
20
32
3
5
6
10
7
11
14
22
12
20
25
40
5
8
10
17
4
6
8
13
12
20
25
40
5
8
10
17
4
6
8
13
27
44
50
80
27
44
29
47
27
44
29
47
20
32
20
32
20
32
20
32
9
14
18
29
4
7
9
15
3
6
7
12
1
2
3
5
4
6
5
8
15
24
30
48
15
24
30
48
13
21
27
46
13
21
27
46
13
20
26
41
13
20
26
41
9
14
18
29
9
14
18
29
4
6
8
13
4
6
8
13
18
28
36
57
14
22
28
44
16
27
20
32
12
20
20
32
9
14
18
29
4
7
9
14
4
6
8
12
2
3
4
7
2
3
4
7
10
16
20
32
10
16
20
32
10
16
20
32
Installation Manual
Model
NPF-60D
NPF90
NPF90D
NPF-120
NPF-120D
OWA-60U
OWA-90U
OWA-120U
PCD-16A(115V)
PCD-16B
PCD-25A(115V)
PCD-25B
PCD-40B
PCD-60B
PLC- 30
PLC- 45
PLC- 60
PLC- 100
PLD-16A(115V)
PLD-16B
PLD-25
PLD-40B
PLD-60B
PLM-12
PLM-25
PLM-40
PLN-20
PLN-30
PLN-45
PLN-60
PLN-100
PLP-20
PLP-30
PLP-45
PLP-60
PWM-40
PWM-60
PWM-90
PWM-120
ULP-150
B10
6
2
2
2
2
1
2
2
36
80
23
50
29
20
40
26
20
1
36
80
45
29
20
100
50
29
61
40
26
20
1
57
40
26
20
6
6
2
2
2
B16
9
3
3
4
4
2
3
4
58
128
37
80
47
32
64
42
32
3
58
128
72
47
32
160
80
47
98
64
42
32
3
92
64
42
32
9
9
3
4
4
C10 C16 D10
10
16
20
3
6
7
3
6
7
4
6
8
4
6
8
2
4
5
3
6
7
4
6
8
36
58
36
80 128 80
23
37
23
50
80
50
29
47
29
20
32
20
40
64
40
26
42
26
20
32
20
3
5
6
36
58
36
80 128 80
50
80
50
29
47
29
20
32
20
100 160 100
50
80
50
29
47
29
61
98
61
40
64
40
26
42
26
20
32
20
3
5
6
61
98
61
40
64
40
26
42
26
20
32
20
10
16
20
10
16
20
3
6
7
4
6
8
4
6
8
D16
32
12
12
13
13
8
12
13
58
128
37
80
47
32
64
42
32
10
58
128
80
47
32
160
80
47
98
64
42
32
10
98
64
42
32
32
32
12
13
13
Installation Manual
Note: These calculated values are based on MCB S200 series manufactured by ABB except for
HVG/HVGC series, which are calculated by using MCB S260 series of the same manufacturer.
（9）For other information about the products, please refer to www.meanwell.com for details.
 Warning / Caution !!
（1）Risk of electrical shock and energy hazard. All failure should be examined by a qualified technician. Please do
not remove the case of the power supply by yourself!
（2）Risk of irreparable damage. LED power supplies with IP64 to IP66 rating must be located indoors or in a
location where these units can be sheltered from the rain if outdoors.
（3）Please do not install LED power supplies in places with high ambient temperature or close to fire source.
Please refer to the specifications about the maximum ambient temperature limitations.
（4）Output current and output wattage must not exceed the rated values on the specifications.
（5）The FG (
) must be well connected to PE(protective earth) if the unit equips with it.
（6）All MW’s PSUs are designed in accordance with EMC regulations and the related test reports are available by
request. Since they are belong to component power supplies and will be installed inside system enclosure,
when they are integrated into a system, the EMC characteristics of the end system must be re-verified again.
Manufacturer：
MEAN WELL ENTERPRISES Co., Ltd.
No.28, Wuquan 3rd Road, Wugu District,
New Taipei City, Taiwan, 24891
Tel: +886-2-2299-6100
Web: www.meanwell.com