40W AC-DC High Reliability Slim Wall-mounted Adaptor
(for 5V)
■ Features
Ultra slim
Universal AC input / Full range
2 pole EURO plug
No load power consumption< 0.075W
Energy efficiency Level Ⅵ ( except 5V for Level Ⅴ)
Comply with EU ErP
Class Ⅱ power (without earth pin)
Protections: Short circuit / Overload / Over voltage
Fully enclosed plastic case
Pass LPS
3 years warranty
SGA40E
series
(for 9~48V)
■ Applications
Consumer electronic devices
Telecommunication devices
Office facilities
Industrial equipments
■ Description
SGA40E is a 40W ultra slim wall-mounted style single-output green adaptor series, which is compact and
convenient for carry. SGA40E is a class Ⅱ power unit (without FG) equipped with the standard 2-Pole
European plug, accepting the input range from 90VAC to 264VAC. The whole series provides different
models with output voltages ranging between 5VDC and 48VDC that it can satisfy the demands for various
types of consumer electronic devices.
With the efficiency up to 89% and the extremely low no-load power consumption below 0.075W, SGA40E
is compliant with EU ErP. The supreme feature allows the adaptor to save the energy when it is under
either the operating mode or the standby mode. The entire series is approved for international safety
regulations; moreover, it adopts the 94V-0 flame retardant plastic case that it can effectively prevent users
from electric hazards.
■ Model Encoding
SGA 40 E 05 - P1J
{
P1J: Plug for standard model, 2.1ψ×5. 5ψ×11mm,
C+ tuning fork type
DC plug type
Optional plug type available per request
Output voltage
European 2 pin AC plug
Output wattage
Series name
File Name:SGA40E-SPEC 2015-05-05
SGA40E
40W AC-DC High Reliability Slim Wall-mounted Adaptor
series
SPECIFICATION
ORDER NO.
SAFETY MODEL NO.
DC VOLTAGE
OUTPUT
SGA40E05-P1J
SGA40E09-P1J
SGA40E12-P1J
SGA40E15-P1J
SGA40E18-P1J
SGA40E24-P1J
SGA40E48-P1J
SGA40E05
SGA40E09
SGA40E12
SGA40E15
SGA40E18
SGA40E24
SGA40E48
48V
Note.2 5V
9V
12V
15V
18V
24V
RATED CURRENT
5A
4.44A
3.33A
2.66A
2.22A
1.67A
0.84A
CURRENT RANGE
0 ~ 5A
0 ~ 4.44A
0 ~ 3.33A
0 ~ 2.66A
0 ~ 2.22A
0 ~ 1.67A
0 ~ 0.84A
RATED POWER (max.)
25W
40W
40W
40W
40W
40W
40W
RIPPLE & NOISE (max.) Note.3 120mVp-p
120mVp-p
120mVp-p
120mVp-p
120mVp-p
150mVp-p
150mVp-p
VOLTAGE TOLERANCE Note.4 ±5.0%
±5.0%
±3.0%
±2.0%
±2.0%
±2.0%
±2.0%
LINE REGULATION
Note.5 ±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
LOAD REGULATION
Note.6 ±5.0%
±5.0%
±3.0%
±2.0%
±2.0%
±2.0%
±2.0%
88%
89%
SETUP, RISE, HOLD UP TIME 500ms, 100ms, 12ms/230VAC
VOLTAGE RANGE
Note.7 90 ~ 264VAC
FREQUENCY RANGE
INPUT
83%
86%
AC CURRENT
INRUSH CURRENT (max.)
1A / 115VAC
0.5A / 230VAC
40A / 115VAC
LEAKAGE CURRENT(max.)
0.25mA / 240VAC
OVERLOAD
110 ~ 250% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
110 ~ 140% rated output voltage
Protection type : Clamp by zener diode, output short
-20 ~ +50℃ (Refer to "Derating Curve")
20% ~ 90% RH non-condensing
-20 ~ +85℃, 10 ~ 95% RH
OVER VOLTAGE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
SAFETY & WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC
(Note. 8)
EMC EMISSION
EMC IMMUNITY
LIFE
CONNECTOR
NOTE
47 ~ 63Hz
EFFICIENCY (Typ.)
PROTECTION
OTHERS
500ms, 100ms, 12ms/115VAC at full load
MTBF
DIMENSION
86.5%
86.5%
87%
70A / 230VAC
±0.03% / ℃ (0 ~ 40℃)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
TUV EN60950-1 approved
I/P-O/P:4242VDC
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
Compliance to EN55022 class B, EN61000-3-2,3
Compliance to EN61000-4,-2,3,4,5,6,8,11, light industry level, criteria A
3 years : 100% load 40℃, 12hours / day
400Khrs min. MIL-HDBK-217F(25℃)
75.5*32*47.5mm (L*W*H)
165g ; 60pcs / 13kg / CARTON
PACKING
PLUG
See page 3 ; Other type available by customer requested
CABLE
See page 3 ; Other type available by customer requested
1.All parameters are specified at 230VAC input, rated load, 25℃ 70% RH ambient.
2.DC voltage: The output voltage set at point measure by plug terminal & 50% load.
3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
4.Tolerance: includes set up tolerance, line regulation, load regulation.
5.Line regulation is measured from low line to high line at rated load.
6.Load regulation is measured from 10% to 100% rated load
7.Derating may be needed under low input voltages. Please check the static characteristics for more details.
8.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the
EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com)
File Name:SGA40E-SPEC 2015-05-05
SGA40E
40W AC-DC High Reliability Slim Wall-mounted Adaptor
Derating Curve
series
Static Characteristics
100
90
LOAD (%)
LOAD (%)
100
70
80
70
60
50
40
-20
10
20
30
40
50
90
Ta (℃)
100
115
120
130
140
160
180
200
220
240
264
INPUT VOLTAGE
Mechanical Specification
UL1571 14AWG 1000±50mm for 5V
UL1571 16AWG 1000±50mm for 9V~15V
UL2468 20AWG 1500±50mm for 18V~48V
32
75.5
Unit:mm
47.5
11±0.5mm
C"+"
ID 2.1 x OD 5.5
Outside
Inside
Plug Assignment
Standard plug: P1J
P1J
P/N
OUTPUT
CENTER
+
Installation Manual
Please refer to : http://www.meanwell.com/webnet/search/InstallationSearch.html
File Name:SGA40E-SPEC 2015-05-05