GE12 series 10W AC-DC Single Output Interchangeable Wall-mounted Type Model : GE12I05-P1J +5V / 0~2.0A 10W OUTPUT FUNCTION TEST NO 1 TEST ITEM RIPPLE & NOISE SPECICATION 50mVp-p (Max) TEST CONDITION O/P:FULL LOAD Ta:25℃ 2 VOLTAGE TOLERANCE -5% ~ +5% (Max) LINE REGULATION -1% ~ +1% (Max) LOAD REGULATION -5% ~ +5% (Max) SET UP TIME 4000 mS (Max) RISE TIME 100 mS (Max) HOLD UP TIME 10 mS (Min) P -0% ~ +0% P -2.62% ~ +2.5% P 1094 mS P 2.1 mS P 14 mS P I/P:230VAC O/P:FULL LOAD Ta:25℃ 7 -0.76% ~ +4.36% I/P:230VAC O/P:FULL LOAD Ta:25℃ 6 P I/P:230VAC O/P:FULL ~MIN LOAD Ta:25℃ 5 7.6mVp-p I/P:90VAC ~264VAC O/P:FULL LOAD Ta:25℃ 4 VERDICT I/P:90VAC~264VAC O/P:FULL~MIN. LOAD Ta:25℃ 3 RESULT I/P:230VAC I/P:115VAC O/P:FULL LOAD Ta:25℃ INPUT FUNCTION TEST NO 1 TEST ITEM VOLTAGE RANGE SPECICATION 90VAC ~ 264VAC TEST CONDITION O/P:FULL LOAD Ta:25℃ 2 3 4 5 FREQUENCY RANGE EFFICIENCY AVERAGE EFFICIENCY AC CURRENT P TEST: OK P O/P:FULL LOAD Ta:25℃ 75.04% P I/P:115/230VAC O/P:25%、50%、75%、100% LOAD 76.736% (115VAC) Ta:25℃ 74.069% (230VAC) I/P: 100VAC ~ 240VAC NO DAMAGE OSC O/P:FULL~MIN LOAD Ta:25℃ 70% (Typ) I/P:230VAC 0.4A (Max) NO LOAD POWER CONSUMPTION < 0.3W P I/P: 100VAC O/P:FULL LOAD Ta:25℃ 6 VERDICT 57V ~ 264V 50HZ - 60HZ (Typ) >73.37% ( LEVEL Ⅴ) RESULT I/P:TESTING 0.22A P 0.2W P I/P:230VAC O/P: NO LOAD Ta:25℃ Model: GE12I05-P1J Test Report 1 / 3 GE12 series 10W AC-DC Single Output Interchangeable Wall-mounted Type 7 8 INRUSH CURRENT LEAKAGE CURRENT < 80A I/P:230VAC COLD START O/P:FULL LOAD Ta:25℃ < 0.25mA I/P:240VAC 60A P L-FG:0.02mA O/P:Min LOAD Ta:25℃ N-FG:0.02mA P PROTECTION FUNCTION TEST NO 1 2 3 TEST ITEM OVER LOAD PROTECTION OVER VOLTAGE PROTECTION SHORT PROTECTION SPECICATION 110 ~ 200% (Typ) TEST CONDITION RESULT I/P:230VAC 174% O/P:TESTING Ta:25℃ HICCUP MODE RESET AUTO RECOVER CLAMP BY ZENER DIODE I/P:230VAC 115 ~ 135% (Typ) O/P:MIN LOAD Ta:25℃ CLAMP BY ZENER DIODE SHORT OUTPUT I/P:264VAC NO DAMAGE 1 HOUR NO DAMAGE O/P:FULL LOAD Ta:25℃ HICCUP MODE RESET AUTO RECOVER VERDICT P P P SAFETY TEST NO 1 TEST ITEM WITHSTAND VOLTAGE SPECICATION I/P-O/P:4242VDC/min TEST CONDITION RESULT I/P-O/P:4242VDC/min Ta:25℃ I/P-O/P:0.002 mA NO DAMAGE 2 ISOLATION RESISTANCE I/P-O/P:500VDC>100MΩ I/P-O/P:500VDC Ta:25℃ I/P-O/P:>30GΩ NO DAMAGE VERDICT P P ENVIRONMENT TEST NO 1 TEST ITEM TEMPERATURE RISE TEST SPECICATION TEST CONDITION RESULT VERDICT 1. ROOM AMBIENT BURN-IN：13HRS I/P:230VAC O/P:100% LOAD Ta=25℃ 2. ROOM AMBIENT BURN-IN：1HRS I/P:230VAC O/P:75% LOAD Ta=40℃ 3. ROOM AMBIENT BURN-IN：44HRS I/P:230VAC O/P:50% LOAD Ta=50℃ NO Position P/N 1 2 3 1 D2 1N4007 59.9℃ 66.5℃ 68.8℃ 2 D8 77.9℃ 81.9℃ 79.8℃ 3 I/P C4 FR107 10uF/400V 10*16 KM 105℃ SAMXON 61.5℃ 68.1℃ 69.8℃ 4 Q1 STK0260 76.4℃ 81.4℃ 79.1℃ 5 T1 EF-20 81.3℃ 82.2℃ 80.0℃ 6 O/P D9 7 O/P C11 SR506 1000uF/10V 8*16 GT 105℃ SAMXON 8 C6 9 U1 P 110.3℃ 102.9℃ 93.9℃ 83.0℃ 81.3℃ 78.7℃ 22uF/50V 5*11 RL 105℃ SAMXON 66.6℃ 71.1℃ 72.1℃ OB2263 67.2℃ 73.0℃ 74.1℃ Model: GE12I05-P1J Test Report 2 / 3 GE12 series 10W AC-DC Single Output Interchangeable Wall-mounted Type OTHER NO 1 TEST ITEM CAPACITOR LIFE CYCLE 2 SPECICATION TEST CONDITION RESULT SUPPOSE C11 IS THE MOST CRITICAL COMPONENT I/P:230 VAC O/P:FULL LOAD Ta=30℃ LIFE TIME=19494HRS MTBF I/P:230 VAC O/P:75% LOAD Ta=40℃ LIFE TIME=31016HRS I/P:230 VAC O/P:50% LOAD Ta=50℃ LIFE TIME=37141HRS P MIL-KDBK-217F NOTICES 2 PARTS COUNT TOTAL FAILURE RATE：1.6537 P M.T.B.F：604706HRS DATE SAMPLE 2009.3.10 PRODUCT SAMPLE TEST RESULT PASS VERDICT TESTER APPROVAL PETER VINCENT ZENG Model: GE12I05-P1J Test Report 3 / 3