NSD10-S series 10W DC-DC Regulated Single Output MODEL：NSD10-12S5 OUTPUT FUNCTION TEST NO 1 TEST ITEM SPECICATION TEST CONDITION RESULT RIPPLE & NOISE V1: 75 mVp-p (Max ) I/P: 12VDC V1: VERDICT 21 mVp-p (Max ) O/P:FULL LOAD Ta:25℃ 2 OUTPUT VOLTAGE V1: 2 %~ -2 % (Max) TOLERANCE 3 LINE REGULATION I/P: 9.8VDC / 36VDC O/P:FULL/ MIN Ta:25℃ V1: 1%~ -1 % (Max) P V1: 0.3 %~ -0.3 % LOAD I/P: 9.8VDC ~ 36VDC P V1: 0 %~ 0 % O/P:FULL LOAD Ta:25℃ 4 LOAD REGULATION V1: 1 %~ -1 % (Max) I/P: 12VDC P V1: 0.25 %~ -0.25 % O/P:FULL ~MIN LOAD Ta:25℃ 5 OVER/UNDERSHOOT TEST < +5% P TEST: < 5% I/P: 12 VDC O/P:FULL LOAD Ta:25℃ 6 DYNAMIC LOAD V1: 1000 mVp-p I/P: 12VDC P 287mVp-p O/P:FULL /Min LOAD P 90%DUTY/1KHZ Ta:25℃ INPUT FUNCTION TEST NO 1 TEST ITEM SPECICATION TEST CONDITION INPUT VOLTAGE RANGE 9.8VDC~ 36 VDC I/P:TESTING RESULT VERDICT 8.7 V~ 36 V O/P:FULL LOAD Ta:25℃ I/P: TEST: OK LOW-LINE-0.2V= 9.6 V P HIGH-LINE+5%= 37.8 V O/P:FULL/MIN LOAD ON: 30 Sec . OFF: 30 Sec 10MIN ( AC POWER ON/OFF NO DAMAGE ) 2 EFFICIENCY 75 % (TYP) I/P: 12 VDC 79.2 % O/P:FULL LOAD Ta:25℃ 3 INPUT CURRENT 12 VDC/ 1.4A(TYP) I/P: 12 VDC P I= 1.01 A P O/P:FULL LOAD Ta:25℃ 4 SHUTDOWN IDLE CURRENT 20 mA / 12VDC I/P: 12 VDC 17.4 mA / 12VDC O/P:FULL LOAD Ta:25℃ p Model:NSD10-12S5 Test Report 1 / 4 NSD10-S series 10W DC-DC Regulated Single Output PROTECTION FUNCTION TEST NO 1 TEST ITEM OVER LOAD PROTECTION SPECICATION Above 105% TEST CONDITION RESULT I/P: 12VDC 159 % O/P:TESTING Ta:25℃ Over power Limiting, VERDICT recovers automatically after fault P condition is removed 2 4 OVER VOLTAGE PROTECTION SHORT PROTECTION CH1: 5.75 V~ 7.5V I/P: DC SOURSE 6.3 V / CH1 0.1A O/P:MIN LOAD Ta:25℃ Recovers automatically after fault SHORT EVERY OUTPUT I/P: 36 VDC NO DAMAGE 60 SECOND NO DAMAGE O/P: FULL LOAD Ta:25℃ Constant Current Limiting condition is removed P P CONTROL FUNCTION TEST NO 1 TEST ITEM SPECICATION TEST CONDITION RESULT REMOTE CONTROL Logic “1” OPEN : ON I/P: 12VDC Logic “1” : POWER ON Logic “0” GON : OFF O/P:FULL LOAD Ta:25℃ Logic “0” :POWER OFF Model:NSD10-12S5 VERDICT p Test Report 2 / 4 NSD10-S series 10W DC-DC Regulated Single Output ENVIRONMENT TEST NO 1 TEST ITEM SPECICATION TEMPERATURE RISE TEST MODEL：NSD10-12S5 TEST CONDITION RESULT VERDICT 1. ROOM AMBIENT BURN-IN：1.5 HRS I/P: 12 VDC O/P: FULL LOAD Ta= 25.1 ℃ 2. HIGH AMBIENT BURN-IN：2 HRS I/P: 12 VDC O/P: FULL LOAD Ta= 58.2 ℃ 2 OVER LOAD BURN-IN TEST NO Position P/N 1 2 D100 L100 STPS15L45CB-TR 15A/45V TS-021 3 C106 4 5 6 ROOM AMBIENT HIGH AMBIENT Ta= 25.1℃ Ta= 58.2℃ 72.4℃ 103.5℃ 69.7℃ 101.2℃ 100U/10V 125℃ 66.6℃ 98.0℃ T1 COIL TS-015 76.3℃ 108.5℃ Q1 BCX56 1A/80V 67.8℃ 99.6℃ Q2 CET1012 10A/120V 71.2℃ 103.9℃ 7 L1 1UH 67.3℃ 99.0℃ 8 U1 TL3843 73.1℃ 104.8℃ 9 CASE 上方中間處 65.3℃ 97.4℃ NO DAMAGE I/P: 12 VDC O/P: 120 ﹪LOAD 1 HOUR ( MIN ) P TEST：OK P Ta:25℃ 3 LOW TEMPERATURE TURN ON AFTER 2 HOUR TURN ON TEST I/P: 12VDC O/P: 100﹪LOAD TEST：OK P Ta= -25℃ 4 AFTER 12 HOURS I/P: 39 VDC HIGH TEMPERATURE IN CHAMBER ON CONTROL 60 ℃ O/P:FULL LOAD Ta= 60 ℃ NO DAMAGE + 0.03 %(0~60℃) I/P: 12 VDC HIGH VOLTAGE TURN ON TEST 5 TEMPERATURE VIBRATION TEST HUMIDITY= P 95 %R.H + 0.005 %(0~60℃) P O/P:FULL LOAD COEFFICIENT 6 TEST：OK HIGH HUMIDITY TEST：OK 1 Carton & 1 Set (1) Waveform: Sine Wave (2) Frequency:10~500Hz (3) Sweep Time:10min/sweep cycle P (4) Acceleration:2G (5) Test Time:1 hour in each axis (X.Y.Z) (6) Ta:25℃ SAFETY TEST NO 1 2 3 TEST ITEM SPECICATION TEST CONDITION RESULT WITHSTAND VOLTAGE I/P-O/P: 1.5KVDC/min I/P-O/P: 1.8KVDC/min Ta:25℃ I/P-O/P: ISOLATION RESISTANCE APPROVAL I/P-O/P:500VDC>100MΩ I/P-O/P: 500 VDC Ta:25℃ / 70% RH VERDICT 0.002 mA P NO DAMAGE I/P-O/P: 30 G Ω p NO DAMAGE TUV: Certificate NO ： P UL: File NO ：E183223 Model:NSD10-12S5 Test Report 3 / 4 NSD10-S series 10W DC-DC Regulated Single Output E.M.C TEST NO 1 2 3 TEST ITEM RADIATION E.S.D E.F.T SPECICATION TEST CONDITION RESULT EN55022 I/P: 12VDC PASS CLASS B O/P:FULL LOAD Ta:25℃ Test by certified Lab EN61000-4-2 I/P: 12 VDC CRITERIA A LIGHT INDUSTRY AIR:8KV / Contact:4KV O/P:FULL LOAD Ta:25℃ EN61000-4-4 I/P: 12 VDC LIGHT INDUSTRY O/P:FULL LOAD Ta:25℃ INPUT: 1KV 7 VERDICT P P CRITERIA A P Test by certified Lab ＆ Test Report Prepare M.T.B.F & LIFE CYCLE CALCULATION NO 1 TEST ITEM SPECICATION MTBF MIL-HDBK-217F NOTICES2 PARTS COUNT TEST CONDITION RESULT VERDICT p TOTAL FAILURE RATE: 2138.2K HRS COMPONENT STRESS TEST NO 1 TEST ITEM SPECICATION TEST CONDITION RESULT Power Transistor Q2 Rated I/P:High-Line +3V = 39 V (1) 73.2 V VERDICT ( D to S) or (C to E) Peak Voltage CUE1012 : 120 V 10 A O/P: (1)Full Load Turn on (2) 82.4 V P (2) Output Short Ta:25℃ 2 Diode Peak Voltage D100 Rated I/P:High-Line +3V = 39 V (1) 31 V STPS15L45CB 15A/45V O/P: (1)Full Load Turn on (2) 11 V P (2)Output Short Ta:25℃ 3 Input Capacitor Voltage C5 Rated : 105 / 50V I/P:High-Line +3V = 39 V (1) 38.71 V O/P: (1)Full Load Turn on /Off (2) 38.75 V (2) Min load Turn on /Off (3) 38.75 V P (3)Full Load /Min load Change Ta:25℃ 4 Control IC Voltage Test U1 Rated I/P:High-Line +3V = 39 V (1) 14.66 V TL3843D : 20 V O/P: (1)Full Load Turn on /Off (2) 13.45 V (2) Min load Turn on /Off (3) 14.66 V P (3)Full Load /Min load Change Ta:25℃ DATE 2007/1/11 2007/3/5 2007/5/24 SAMPLE TEST RESULT TESTER APPROVAL RD SAMPLE PASS VINCENT TSENG MAX LIN PASS VINCENT TSENG MAX LIN PASS VINCENT TSENG MAX LIN PRODUCT SAMPLE W0702A47 PRODUCT SAMPLE W0705B71 2003/12/12 Model:NSD10-12S5 A50-F023 Test Report 4 / 4