RSP-500 500W Single Output with PFC Function series ■ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ Bauar t gepruft Sicherheit egel ma ge od o s be wac g www.tuv.com ID 2000000000 SPECIFICATION MODEL OUTPUT RSP-500-3.3 RSP-500-4 RSP-500-12 RSP-500-15 RSP-500-24 RSP-500-27 RSP-500-48 DC VOLTAGE 3.3V 4V 5V 12V 15V 24V 27V 48V RATED CURRENT 90A 90A 90A 41.7A 33.4A 21A 18.6A 10.5A CURRENT RANGE 0 ~ 90A 0 ~ 90A 0 ~ 90A 0 ~ 41.7A 0 ~ 33.4A 0 ~ 21A 0 ~ 18.6A 0 ~ 10.5A RATED POWER 297W 360W 450W 500.4W 501W 504W 502.2W 504W RIPPLE & NOISE (max.) Note.2 120mVp-p 120mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p VOLTAGE ADJ. RANGE 3.6 ~ 4.3V 4.5 ~ 5.5V 10 ~ 13.2V 13.5 ~ 18V 20 ~ 26.4V 26 ~ 30V 41 ~ 56V VOLTAGE TOLERANCE Note.3 ±2.0% ±2.0% ±2.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.3% ±0.3% ±0.2% ±0.2% ±0.2% LOAD REGULATION ±1.0% ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME 1500ms, 80ms/230VAC HOLD UP TIME (Typ.) 18ms/230VAC 89% 89.5% 90.5% 2.8 ~ 3.6V PF>0.95/230VAC EFFICIENCY (Typ.) 81% 4.2A/115VAC LEAKAGE CURRENT OVERLOAD PROTECTION 120 ~ 370VDC POWER FACTOR (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) OVER VOLTAGE OVER TEMPERATURE REMOTE CONTROL FUNCTION REMOTE SENSE 20A/115VAC 3000ms, 80ms/115VAC at full load 14ms/115VAC at full load VOLTAGE RANGE Note.4 85 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz INPUT RSP-500-5 PF>0.98/115VAC at full load 84% 83% 88% 88% 2.1 A/230VAC 5.3A/115VAC 2.65 A/230VAC 40A/230VAC <2mA / 240VAC 105 ~ 130% rated output power Protection type : Constant current limiting , recovers automatically after fault condition is removed 3.8 ~ 4.5V 4.5 ~ 5.3V 5.75 ~ 6.75V 13.8 ~ 16.2V 18.8 ~ 21.8V 27.6 ~ 32.4V 32.9 ~ 38.3V 58.4 ~ 68V Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, recovers automatically after temperature goes down POWER ON:open or 0~0.8VDC between RC+(Pin 4)&RC-(Pin3) on CN100 POWER OFF: 4~10VDC between RC+(Pin 4)&RC-(Pin3) on CN100 Compensate voltage drop on the load wiring up to 0.3V FAN CONTROL (Typ.) RTH2≧50℃±10℃Fan on ; RTH2≦40℃±10℃ Fan off (Fan always on for 3.3~5V,Fan ON/OFF control for 12~48V) WORKING TEMP. -30 ~ +70℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION OTHERS I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃ / 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, EN61204-3 heavy industry level, criteria A MTBF 187.7K hrs min. DIMENSION 230*127*40.5mm (L*W*H) 1.3Kg; 9pcs/12.7Kg/0.7CUFT PACKING NOTE UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC MIL-HDBK-217F (25℃ ) ℃ File Name:RSP-500-SPEC 2014-10-22 RUSSPP--5320205 500W Single Output with PFC Function Mechanical Specification Case No.226A ssee rr iieess Unit:mm 230 88 39.3 159.7 9.2 6 5 4 TB2 11 3 9.5 8.2 13 24 5-M4 L=4mm Pin No. 1 2 3 127 89 1 LED CN100 69 135 SVR1 +V ADJ. AC Input Terminal Pin No. Assignment (TB1) Air flow direction 2 DC Output Terminal Pin No. Assignment (TB2) 19 3 2 TB1 1 16 Pin No. 1~3 4~6 15 40.5 18 Pin No. Assignment 1 -S +S 2 3 RCRC+ 4 12.5 13.3 2.5 Mating Housing Terminal HRS DF11-4DS or equivalent HRS DF11-**SC or equivalent 4-M4(Both Sides) L=5mm 6.5 6.5 Block Diagram FAN ON/OFF CONTROL ACTIVE INRUSH CURRENT LIMITING EMI FILTER I/P Assignment DC OUTPUT -V DC OUTPUT +V Connector Pin No. Assignment (CN100) : HRS DF11-04DP-2DS or equivalent 170 6.9 40 Assignment AC/L AC/N FG RECTIFIERS & PFC fosc : 70KHz FAN +S RECTIFIERS & FILTER POWER SWITCHING +V -V -S DETECTION CIRCUIT O.L.P. FG O.T.P. Derating Curve O.T.P. PWM & PFC CONTROL O.V.P. RC+ RC- Static Characteristics 100 100 90 80 80 70 LOAD (%) LOAD (%) 60 40 20 -30 60 50 40 0 10 20 30 40 50 AMBIENT TEMPERATURE (℃) 60 70 (HORIZONTAL) 85 90 95 100 115 135 155 175 195 230 264 INPUT VOLTAGE (VAC) 60Hz File Name:RSP-500-SPEC 2014-10-22 RUSSPP--5320205 500W Single Output with PFC Function ssee rr iieess Function Description of CN100 Pin No. Function Description Negative sensing. The -S signal should be connected to the negative terminal of the load. The -S and +S leads should be twisted in pair to -S 1 minimize noise pick-up effect. The maximum line drop compensation is 0.3V. 2 +S 3 4 RCRC+ Positive sensing. The +S signal should be connected to the positive terminal of the load. The +S and -S leads should be twisted in pair to minimize noise pick-up effect. The maximum line drop compensation is 0.3V. Return for RC+ signal input. Turns the output on and off by electrical or dry contact between pin 4 ( RC+) and pin 3 (RC-). 0~0.8VDC or open: Power ON, 4~10VDC: Power OFF. Function Manual CN100 1.Remote Control The PSU can be turned ON/OFF by using the "Remote Control" function. SVR1 +V ADJ. TB1 4 RC-S RC+ +S 1 2 3 2 1 1 LED -V SW 13 24 TB2 +V 2 OFF 3 SW ON (4 ~ 10V) 4 ON 5 SW OFF (0 ~ 0.8VDC) or open CN100 PSU Status 6 Between RC-(pin3) and RC+(pin4) on CN100 3 External Power Source I=6~20mA - + LOAD 2.Remote Sense The remote sensing compensates voltage drop on the load wiring up to 0.3V SVR1 +V ADJ. +S (pin2) + - RC-S RC+ +S 1 2 TB1 3 2 1 1 LED 2 3 4 5 6 -V 4 13 24 TB2 +V CN100 CN100 3 -S (pin1) LOAD Sense lines should be twisted in pairs File Name:RSP-500-SPEC 2014-10-22