PM-10 series 10W Output Switching Power Supply MODEL：PM-10-15 OUTPUT FUNCTION TEST NO 1 TEST ITEM SPECICATION TEST CONDITION RIPPLE & NOISE V1: 150 I/P: 230VAC mVp-p (Max ) RESULT VERDICT V1: 16 mVp-p (Max ) O/P:FULL LOAD Ta:25℃ 2 OUTPUT VOLTAGE V1: 2%~ -2 % (Max) I/P:115 VAC / 264 VAC TOLERANCE 3 LINE REGULATION P O/P:FULL/ MIN Ta:25℃ V1: 0.5 %~ -0.5 % (Max) V1: 0.05 %~ -0.05 % LOAD I/P:115 VAC ~ 264 VAC P V1: 0 %~ 0 % O/P:FULL LOAD Ta:25℃ 4 LOAD REGULATION V1: 1 %~ -1 % (Max) I/P: 230 VAC P V1: 0.05 %~ -0.05 % O/P:FULL ~MIN LOAD Ta:25℃ 5 SET UP TIME P 230VAC: 1000 ms (Max) I/P: 230 VAC 230VAC/ 748 ms 115 VAC: 1000 ms (Max) I/P: 115 VAC 115VAC/ 324 ms O/P:FULL LOAD Ta:25℃ 6 RISE TIME 230VAC: 20 ms (Max) I/P: 230 VAC 230VAC/ 9 ms 115VAC: 20 ms (Max) I/P: 115 VAC 115VAC/ 9 ms O/P:FULL LOAD Ta:25℃ 7 HOLD UP TIME 230VAC: 100 ms (TYP) I/P: 230 VAC 230VAC/ 144 ms 115VAC: 24 ms (TYP) I/P: 115 VAC 115VAC/ 32 ms TEST: <5 % O/P:FULL LOAD Ta:25℃ 8 OVER/UNDERSHOOT TEST I/P: 230 VAC < +5% O/P:FULL LOAD Ta:25℃ 9 DYNAMIC LOAD V1: 1500 mVp-p I/P: 230 VAC P P P P 124 mVp-p O/P:FULL /Min LOAD P 90%DUTY/1KHZ Ta:25℃ Model: PM-10-15 Test Report 1 / 5 PM-10 series 10W Output Switching Power Supply INPUT FUNCTION TEST NO 1 TEST ITEM SPECICATION TEST CONDITION INPUT VOLTAGE RANGE 85VAC~264 VAC I/P:TESTING RESULT VERDICT 50 V~264V O/P:FULL LOAD Ta:25℃ I/P: TEST: OK LOW-LINE-3V= 82 V P HIGH-LINE+15%=300 V O/P:FULL/MIN LOAD ON: 30 Sec . OFF: 30 Sec 10MIN ( AC POWER ON/OFF NO DAMAGE ) 2 3 INPUT FREQUENCY RANGE EFFICIENCY 47HZ ~440 HZ I/P: 85 VAC ~ 264 VAC NO DAMAGE OSC O/P:FULL~MIN LOAD Ta:25℃ 79 % (TYP) I/P: 230 VAC TEST: OK P 79.8 % O/P:FULL LOAD Ta:25℃ 4 INPUT CURRENT P 230V/ 0.15 A (TYP) I/P: 230 VAC I= 0.13 A/ 230 VAC 115V/ 0.25 A (TYP) I/P: 115 VAC I= 0.21 A/ 115 VAC P O/P:FULL LOAD Ta:25℃ 5 6 INRUSH CURRENT LEAKAGE CURRENT 230V/ 45 A (TYP) I/P: 230 VAC I= 34 A/ 230 VAC 115V/ 25 A(TYP) I/P: 115 VAC I= 17 A/ 115 VAC COLD START O/P:FULL LOAD Ta:25℃ <80uA /264 VAC I/P: 264 VAC L-V+ : 69 uA for touch leakage current O/P:Min LOAD Ta:25℃ L-V-: 69 uA N-V+: 69 uA N-V-: 69 uA P P PROTECTION FUNCTION TEST NO 1 TEST ITEM SPECICATION TEST CONDITION OVER LOAD PROTECTION Above 105 % I/P: 230 VAC I/P: 115 VAC O/P:TESTING Ta:25℃ 2 3 OVER VOLTAGE PROTECTION SHORT PROTECTION CH1: 17.25V~ 20.25V O/P:MIN LOAD Ta:25℃ RESULT VERDICT 137 %/ 230 VAC 139 %/ 115 VAC P Hiccup Mode 18.2 V/ 60mA Shut off SHORT EVERY OUTPUT I/P: 264 VAC NO DAMAGE 1 HOUR NO DAMAGE O/P:FULL LOAD Ta:25℃ Hiccup Mode SPECICATION TEST CONDITION RESULT P P CONTROL FUNCTION TEST NO 1 TEST ITEM No load power consumption <0.5W I/P: 240 VAC VERDICT 0.29W/ 240 VAC P O/P:NO LOAD Model: PM-10-15 Test Report 2 / 5 PM-10 series 10W Output Switching Power Supply ENVIRONMENT TEST NO 1 TEST ITEM SPECICATION TEMPERATURE RISE TEST MODEL：PM-10-24 TEST CONDITION RESULT VERDICT 1. ROOM AMBIENT BURN-IN：1.5HRS I/P: 230VAC O/P: FULL LOAD Ta= 27.9 ℃ 2. HIGH AMBIENT BURN-IN：1.5HRS I/P: 230VAC O/P: FULL LOAD Ta= 54 ℃ NO ROOM AMBIENT HIGH AMBIENT Ta= 27.9 ℃ Ta= 54 ℃ 60.1℃ 80.4℃ Position P/N 1 U1 DM0265RNB FAIR 2 T1 COIL 76.0℃ C36 TF-1396 LS 47U/50V RUB 105℃ YXF 56.3℃ 3 51.0℃ 71.5℃ 4 D1 BYV26C 1A/600V VIS 59.2℃ 79.9℃ 5 ZD1 P6KE200A PAN 56.7℃ 77.6℃ 6 BD1 LT 46.3℃ 68.0℃ HER203 2A/200V REC 33U/400V NIC 105℃ PT 54.5℃ 76.0℃ 47.8℃ 69.5℃ 47.6℃ 68.9℃ 48.3℃ 69.9℃ 46.5℃ 68.0℃ 7 8 KBP208G 2A/800V D100 C5 9 L100 10 C105 DR007D 100U/35V RUB 105℃ YXF 11 LF1 LF-501 LS P 12 13 14 15 2 OVER LOAD BURN-IN TEST NO DAMAGE I/P: 230 VAC O/P: 142﹪LOAD 1 HOUR ( MIN ) TEST：OK P Ta:25℃ 3 LOW TEMPERATURE TURN ON AFTER 2 HOUR TURN ON TEST I/P: 230 VAC O/P: 100﹪LOAD TEST：OK P Ta= -20℃ 4 AFTER 12 HOURS I/P: 272 VAC HIGH TEMPERATURE IN CHAMBER ON CONTROL 50℃ O/P:FULL LOAD Ta= 50℃ NO DAMAGE + 0.03%(0~50℃) I/P: 230 VAC HIGH VOLTAGE TURN ON TEST 5 TEMPERATURE VIBRATION TEST HUMIDITY= P 95 %R.H + 0.01 %(0~50℃) P O/P:FULL LOAD COEFFICIENT 6 TEST：OK HIGH HUMIDITY 1 Carton & 1 Set TEST：OK (1) Waveform: Sine Wave (2) Frequency:10~500Hz (3) Sweep Time:10min/sweep cycle P (4) Acceleration:2G (5) Test Time:1 hour in each axis (X.Y.Z) (6) Ta:25℃ Model: PM-10-15 Test Report 3 / 5 PM-10 series 10W Output Switching Power Supply SAFETY TEST NO 1 TEST ITEM SPECICATION TEST CONDITION RESULT WITHSTAND VOLTAGE I/P-O/P: 4 KVAC/min I/P-O/P: 4.4 KVAC/min Ta:25℃ I/P-O/P: VERDICT 0.85 mA P NO DAMAGE 2 ISOLATION RESISTANCE I/P-O/P:500VDC>100MΩ I/P-O/P: 500 Ta:25℃ VDC I/P-O/P: 30 GΩ P NO DAMAGE 3 APPROVAL TUV: Certificate NO ：TA 50080232 P UL: File NO ： E.M.C TEST NO 1 2 3 4 TEST ITEM SPECICATION TEST CONDITION RESULT HARMONIC EN61000-3-2 I/P: 230 VAC/50HZ PASS CLASS A O/P:FULL LOAD Ta:25℃ EN55022 EN55011 I/P: 230 VAC (50HZ) PASS CLASS B O/P:FULL/50% LOAD Ta:25℃ Test by certified Lab CONDUCTION RADIATION E.S.D 5 E.F.T EN55022 EN55011 I/P: 230 VAC (50HZ) PASS O/P:FULL LOAD Ta:25℃ Test by certified Lab EN61000-4-2 MEDICAL I/P: 230 VAC/50HZ CRITERIA A EN61000-4-4 MEDICAL SURGE P P CRITERIA A O/P:FULL LOAD Ta:25℃ IEC61000-4-5 MEDICAL I/P: 230 VAC/50HZ P CRITERIA A O/P:FULL LOAD Ta:25℃ L-N :2KV 7 P O/P:FULL LOAD Ta:25℃ I/P: 230 VAC/50HZ INPUT: 2KV 6 P CLASS B AIR:8KV / Contact:6KV VERDICT P Test by certified Lab ＆ Test Report Prepare M.T.B.F & LIFE CYCLE CALCULATION NO 1 TEST ITEM SPECICATION CAPACITOR SUPPOSE C105 IS THE MOST CRITICAL COMPONENT I/P: 230VAC O/P:FULL LOAD Ta= 25 ℃ LIFE TIME= 521592 HRS LIFE CYCLE I/P: 230VAC 2 MTBF TEST CONDITION O/P:FULL LOAD Ta= 50 ℃ RESULT VERDICT P LIFE TIME= 125936 HRS MIL-HDBK-217F NOTICES2 PARTS COUNT P TOTAL FAILURE RATE: 723.2KHRS Model: PM-10-15 Test Report 4 / 5 PM-10 series 10W Output Switching Power Supply COMPONENT STRESS TEST NO 1 TEST ITEM SPECICATION TEST CONDITION RESULT Power Transistor U1 Rated I/P:High-Line +3V = 267 V (1) 622 V ( D to S) or (C to E) Peak Voltage DM0265RNB : 660 V 1.5A O/P: (1)Full Load Turn on (2) 616 V (3) 630 V (2) Full Load VERDICT P (3)Output Short Ta:25℃ 2 Diode Peak Voltage D100 Rated I/P:High-Line +3V = 267 V (1) 80 V 31DQ10: 100V/3A O/P: (1)Full Load Turn on (2) 80 V (3) 87 V (2) Full Load P (3)Output Short Ta:25℃ 3 Clamp Diode Peak Voltage D1 Rated I/P:High-Line +3V = 267 V (1) 452 V BYV26C : 600V 1 A O/P: (1)Full Load (2) 458 V (2) Dynamic Load P 90%Duty/1KHz Ta:25℃ 4 Input Capacitor Voltage C5 Rated :33u / 400V/ 105℃ I/P:High-Line +3V = 267 V (1) 378 V O/P: (1)Full Load Turn on /Off (2) 384 V (2) Min load Turn on /Off (3) 378 V (3)Full Load /Min load Change (4) 378 V 13.6 V P (4)Burn in 1hour Ta:25℃ 5 Control IC Voltage Test U1 Rated I/P:High-Line +3V = 267 V (1) DM0265RNB : 20 V O/P: (1)Full Load Turn on /Off (2) 11.2 V (2) Min load Turn on /Off (3) 13.6 V P (3)Full Load /Min load Change Ta:25℃ DATE SAMPLE TEST RESULT TESTER APPROVAL 2005/11/30 RD SAMPLE PASS VINCENT TSENG MAX LIN 2006/4/7 PRODUCT SAMPLE W0601C04 PASS VINCENT TSENG MAX LIN 2003/12/12 Model: PM-10-15 A50-F023 Test Report 5 / 5