SD10U45SL 10A SBR® SUPER BARRIER RECTIFIER PowerDI®5 NEW PRODUCT Features • • • • • • • Mechanical Data Designed as Bypass Diodes for Solar Panels Selectively Rated for 200ºC Maximum Junction Temperature for High Thermal Reliability Patented Super Barrier Rectifier Technology High Forward Surge Capability Ultra Low Forward Voltage Drop Excellent High Temperature Stability Lead Free Finish, RoHS Compliant (Note 2) • • ® Case: PowerDI 5 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020D Terminals: Finish – Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 • • • Weight: 0.093 grams (approximate) LEFT PIN RIGHT PIN Top View Maximum Ratings BOTTOMSIDE HEAT SINK Note: Pins Left & Right must be electrically connected at the printed circuit board. Bottom View @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Symbol VRRM VRWM VRM VR(RMS) IO Value Unit 45 V 32 10 V A IFSM 275 A Symbol Value Unit RθJA RθJA 73 31 ºC/W Thermal Characteristics Characteristic Maximum Thermal Resistance Thermal Resistance Junction to Ambient (Note 3) Thermal Resistance Junction to Ambient (Note 4) VR ≤ 80% VRRM VR ≤ 50% VRRM DC Forward Mode Operating Temperature Range Storage Temperature Range Electrical Characteristics Characteristic Reverse Breakdown Voltage (Note 1) TSTG ºC ºC @TA = 25°C unless otherwise specified Symbol Min Typ Max Unit V(BR)R 45 - 0.42 0.38 0.42 0.47 0.41 V - 0.05 28.0 0.3 15 75 Forward Voltage Drop VF Leakage Current (Note 1) IR Notes: -65 to +150 ≤180 ≤200 -65 to +175 TJ V mA Test Condition IR = 0.3mA IF = 8A, TJ = 25ºC IF = 10A, TJ = 25ºC IF = 10A, TJ = 125ºC VR = 45V, TJ = 25ºC VR = 45V, TJ = 100ºC VR = 45V, TJ = 150ºC 1. Short duration pulse test used to minimize self-heating effect. 2. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes. 3. FR-4 PCB, 2oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. 4. Polymide PCB, 2oz. Copper. Cathode pad dimensions 18.8mm x 14.4mm. Anode pad dimensions 5.6mm x 14.4mm. http://www.luguang.cn Email:[email protected] SD10U45SL IF, INSTANTANEOUS FORWARD CURRENT (A) 5 PD, POWER DISSIPATION (W) 4 3.5 3 2.5 2 1.5 1 0.5 0 0 5 10 15 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 1 Forward Power Dissipation TA = 85°C 1 0.1 T A = 25°C 0.01 TA = -55°C 0.001 0.0001 0 T A = 125°C 0.15 0.3 0.45 0.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 1,000 10,000 CT, TOTAL CAPACITANCE (pF) IR, INSTANTANEOUS REVERSE CURRENT (uA) TA = 150°C T A = 125°C TA = 150°C 10,000 T A = 85°C 100 TA = 25°C 10 1 0.1 0.01 10 100,000 100,000 T A = -55°C 0 5 10 15 20 25 30 35 40 45 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 3 Typical Reverse Characteristics f = 1MHz 1,000 100 10 1 0.1 1 10 VR, DC REVERSE VOLTAGE (V) Fig. 4 Total Capacitance vs. Reverse Voltage 12 IF, AVERAGE FORWARD CURRENT (A) NEW PRODUCT 4.5 100 Based on Lead Temp (T L) 10 8 Note 4 6 4 Note 3 2 0 25 50 75 100 125 150 175 TA, AMBIENT TEMPERATURE (°C) Fig. 5 Forward Current Derating Curve http://www.luguang.cn Email:[email protected] 100