SR220 THRU SR2200 SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE 20 to 200 Volts CURRENT 2.0 Ampere FEATURES * * * * * * Low switching noise Low forward voltage drop High current capability High switching capability High surge capabitity High reliability DO-15 MECHANICAL DATA * * * * * Case: Molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.35 gram .034 (0.9) .028 (0.7) 1.0 (25.4) DIA. MIN. .300 (7.6) .230 (5.8) .140 (3.6) .104 (2.6) DIA. 1.0 (25.4) MIN. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL SR220 SR230 SR240 SR250 SR260 Maximum Recurrent Peak Reverse Voltage VRRM 20 30 40 50 60 80 100 150 200 Maximum RMS Voltage VRMS 14 21 28 35 42 56 70 105 140 Volts VDC 20 30 40 50 60 80 100 150 200 Volts RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at Derating Lead Temperature Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 1) SR280 SR2100 SR2150 SR2200 UNITS Volts IO 2.0 Amps I FSM 60 Amps RqJA 45 RqJL 15 0 C/W Typical Junction Capacitance (Note 3) CJ 180 pF Operating Temperature Range TJ 150 0 C T STG -55 to + 150 0 C Storage Temperature Range ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 2.0A DC Maximum Average Reverse Current @T A = 25 o C at Rated DC Blocking Voltage @T A = 100 o C SYMBOL SR220 VF IR SR230 .55 SR240 SR250 SR260 .70 SR280 SR2100 SR2150 SR2200 UNITS .85 0.2 2 NOTES : 1. Thermal Resistance : At 9.5mm lead lengths, PCB mounted. 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 3. "Fully ROHS compliant", "100% Sn plating (Pb-free)". ｈｔｔｐ：／／ｗｗｗ．ｌｕｇｕａｎｇ．ｃｎ ｍａｉｌ：ｌｇｅ＠ｌｕｇｕａｎｇ．ｃｎ Volts mA mA 2006-11 2.0 SR 25 1.5 SR 0~ 22 22 SR 0~ 24 0 0 Single Phase Half Wave 60Hz Inductive or Resistive Load 0.375" (9.5mm) Lead Length 0.5 0 50 00 1.0 100 150 INSTANTANEOUS FORWARD CURRENT, (mA) 2.5 SR AVERAGE FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( SR220 THRU SR2200 ) 10 TA = 125 OC 1.0 0.1 T = 75 OC A 0.01 TA = 25 OC 0.001 0 20 O CJ, JUNCTION CAPACITANCE, (pF) 50 SR220 ~SR240 10 SR250~SR260 SR280 ~SR2200 1.0 0.1 TJ = 25 OC Pulse width=300mS 1% Duty Cycle 0 0.2 0.4 0.6 0.8 1.0 1.2 40 60 80 100 120 1.4 1.6 1.8 FIG.2 TYPICAL REVERSE CHARACTERISTICS 400 TJ = 25 OC 200 100 80 60 40 20 10 0.1 0.4 INSTANTANEOUS FORWARD VOLTAGE, (V) 1.0 4 10 40 REVERSE VOLTAGE, (V) FIG.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 60 FIG.4 TYPICAL JUNCTION CAPACITANCE 8.3mS Single Half Sine-Wave JEDEC Method 50 40 30 20 10 0 1 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (A) LEAD TEMPERATURE, ( C) SR220 ~SR240 SR250~SR260 SR280~SR2200 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz FIG.5 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT ｈｔｔｐ：／／ｗｗｗ．ｌｕｇｕａｎｇ．ｃｎ ｍａｉｌ：ｌｇｅ＠ｌｕｇｕａｎｇ．ｃｎ 80100