XER75014-D - Series Voltage Regulator – Plastic DIP8

XTRM Series
Distributed by
XER75014-D
HIGH-TEMPERATURE LOW-POWER
SERIES VOLTAGE REGULATOR
FEATURES
DESCRIPTION
Up to 10 possible output voltages from same part:
o 1.2V / 1.8V / 2.5V / 3.3V / 5V / 5.5V / 9V / 10V / 12V / 15V.
Input voltage from 2.8V to 40V.
Drop-in replacement of commercial voltage references.
Trimming capabilities.
Operational beyond the -60°C to +230°C temperature range.
Output current up to 50mA @ 230°C.
Soft-start.
Compatible with low and high dropout voltages.
Stable over a wide range of load capacitance (0.1µF to 10µF).
Low intrinsic current consumption (380µA @ 230°C).
Low temperature dependence (-40ppm/°C).
Excellent line regulation (-80ppm/V).
Active-low shutdown control.
Monolithic design for high-reliability.
Latch-up free SOI process.
Ruggedized SMT and thru-hole packages.
Also available as bare die.
XTR75010 is a family of low-power voltage regulators/references
designed for extreme reliability and high temperature applications. Being able to operate with input voltages from 2.8V to 40V,
XTR75010 parts can supply up to 50mA at +230°C while providing excellent regulation characteristics. Parts from this product
family operate as a 3-terminal series regulator/reference with a
temperature coefficient (TC) as low as -40ppm/°C. Up to ten
possible output voltages (1.2V to 15V) can be obtained from the
same part.
Functionality features include shut-down mode and soft-start.
XTR75010 parts can be used in a wide range of applications
such as positive and negative regulators/references, adjustable
power supply, current sources, as well as precision bridge excitation.
Especial design techniques were used allowing XTR75010 parts
to offer a precise, robust and reliable operation in critical applications. Full functionality is guaranteed from -60°C to +230°C,
though operation well below and above this temperature range is
achieved.
XTR75010 parts have been designed to reduce system cost and
ease adoption by reducing the learning curve and providing smart
and easy to use features.
Parts from the XTR75010 family are available in ruggedized SMT
and thru-hole packages. Parts are also available as bare dies.
APPLICATIONS
Reliability-critical, Automotive, Aeronautics & Aerospace,
Down-hole.
Positive and negative precision regulators/references, A/D
and D/A converters, current sources, bridge excitation.
PRODUCT HIGHLIGHT
1.8V Voltage Regulator/Reference
12V Voltage Regulator with Trimming
Negative Voltage Regulator (-5V)
+V
Rlim
TRIM
VIN
/SHDN
/SHDN
Cin
Cout
XTR75011
Vout=+12V
VOUT
TRIM
RA
VIN
R1
/SHDN
Cout
RB
Cin
XTR75011
5V
VIN
GND
Vout=+1.8V
GND
/SHDN
VOUT
12V
/SHDN
XTR75011
1.8V
VIN
GND
VIN
VOUT
TRIM
XTR431
R2
Cout
R3
-VIN
Ω ∙
Ω ∙
XTR2N0625
(PMOS)
VOUT=-5V
Ω∙
Ω
ORDERING INFORMATION
X
Source:
X = X-REL Semi
TR
Process:
TR = HiTemp, HiRel
75
Part family
Product Reference
Temperature Range
Package
XTR75010-BD
-60°C to +230°C
Bare die
XTR75011-S
-60°C to +230°C
Ceramic SOIC
XTR75011-D
-60°C to +230°C
Ceramic side braze DIP
XTR75012x-D
-60°C to +230°C
Ceramic side braze DIP
XTR75012x-FE
-60°C to +230°C
Flatpack with exposed pad
XTR75014-D
-60°C to +230°C
Ceramic side braze DIP
XTR75014-FE
-60°C to +230°C
Flatpack with exposed pad
XTR75015-D
-60°C to +230°C
Ceramic side braze DIP
XTR75015-FE
-60°C to +230°C
Flatpack with exposed pad
Other packages and packaging configurations possible upon request.
01x
Part number
A = 1.2V
B = 1.8V
C = 2.5V
x
Output voltage
(XTR75012 only)
D = 3.3V
G = 9.0V
H = 10V
E = 5.0V
F = 5.5V
i = 12V
J = 15V
Pin Count
16
16
8
8
8
8
8
8
Marking
XTR75010
XTR75011
XTR75011
XTR75012x
XTR75012x
XTR75014
XTR75014
XTR75015
XTR75015
For Full Specification Please Contact: [email protected]
DS-00034-11 rev4A 2013-02-19
© 2013 X-REL Semiconductor
1 of 13
PROPRIETARY INFORMATION
Tel: +44 (0)1603 788967
Web: www.micross.com
www.x-relsemi.com