SR502

MOSPEC
SR502 Thru SR506
Schottky Barrier Rectifiers
SCHOTTKY BARRIER
RECTIFIERS
Using the Schottky Barrier principle with a Molybdenum barrier metal.
These state-of-the-art geometry features epitaxial construction with oxide
passivation and metal overlay contact. Ideally suited for low voltage, high
frequency rectification, or as free wheeling and polarity protection diodes.
5.0 AMPERES
20-60 VOLTS
Features
＊Low Forward Voltage.
＊Low Switching noise.
＊High Current Capacity
＊Guarantee Reverse Avalanche.
＊Guard-Ring for Stress Protection.
＊Low Power Loss & High efficiency.
＊150℃ Operating Junction Temperature
＊Low Stored Charge Majority Carrier Conduction.
＊Plastic Material used Carries Underwriters Laboratory
Flammability Classification 94V-O
＊Moisture Sensitivity Level: MSL-1
DO-201AD
＊ESD: 5KV(Min.) Humen-Body Model
＊ In compliance with EU RoHs 2002/95/EC directives
The marking is indicated by part no. with. “M”. ex:SR502M~SR506M
MAXIMUM RATINGS
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectifier Forward Current
Non-Repetitive Peak Surge Current
(Surge applied at rate load conditions
half-wave, single phase,60Hz )
Operating and Storage Junction
Temperature Range
SR
Symbol
Unit
502
503
504
505
506
VRRM
VRWM
VR
20
30
40
50
60
V
VR(RMS)
14
21
28
35
42
V
IO
IFSM
5.0
A
150
A
DIM
TJ , TSTG
-65 to +150
Characteristic
SR
Symbol
502
Maximum Instantaneous Forward Voltage
(IF =5.0 Amp)
VF
Maximum Instantaneous Reverse Current
(Rated DC Voltage, TC = 25℃)
(Rated DC Voltage, TC = 125℃)
IR
Maximum Thermal Resistance from Junction
to ambient
Typical Junction Capacitance
(Reverse Voltage of 4 volts & f=1 MHz)
503
0.550
A
5.00
5.60
B
25.40
---
C
7.20
9.50
D
1.18
1.22
506
0.700
V
mA
o
30
340
MAX
Unit
505
0.5
20
RθJA
CP
504
MIN
℃
ELECTRIAL CHARACTERISTICS
MILLIMETERS
320
C/W
PF
CASE--Transfer molded
plastic
POLARITY--Cathode indicated
polarity band
SR502 Thru SR506
NSTANTANEOUS FORWARD CURRENT (Amp.)
FIG-2 TYPICAL FORWARD CHARACTERISITICS
SR502-SR504
SR505-SR506
CASE TEMPERATURE (℃)
FORWARD VOLTAGE (Volts)
FIG-3 TYPICAL REVERSE CHARACTERISTICS
FIG-4 TYPICAL JUNCTION CAPACITANCE
o
Tj=125 c
o
Tj=75 c
o
Tj=25 c
PERCENT OF RATED REVERSE VOLTAGE (﹪)
JUNCTION CAPACITANCE (PF)
INSTANTANEOUS REVERSE CURRENT (mA.)
AVERAGE FORWARD RECTIFIED CURRENT (Amp.)
FIG-1 FORWARD CURRENT DERATING CURVE
SR502-SR504
SR505-SR506
REVERSE VOLTAGE (Volts)
PEAK FORWARD SURGE
CURRENT (Amp.)
FIG-5 PEAK FORWARD SURGE CURRENT
NUMBER OF CYCLES AT 60 Hz
GO-C