MOSPEC KBP005/RS201 THRU KBP10/RS207 SINGLE-PHASE BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Ampere FEATURES ＊Low cost ＊High forward surge current capability ＊Ideal for printed circuit board ＊High temperature soldering guaranteed: 260oc/10 second at 5 lbs. (2.3kg) tension MECHANICAL DATA ＊Case: Transfer molded plastic ＊Epoxy: UL94V-O rate flame retardant ＊Terminals：Lead Solderable Per MIL-STD-202E method 208C ＊Polarity：As Marking on Body ＊Mounting Position: Any ＊Weight： 0.069 ounce, 1.95 gram MAXIMUM RATINGS AND ELECTRICAL CHARATERISTICS * Rating at 25℃ ambient temperature unless otherwise specified * Single phase,half wave. 60Hz, resistive or inductive load. * For capacitive load derate current by 20 % Characteristic Symbol KBP005 KBP01 KBP02 KBP04 KBP06 KBP08 KBP10 Unit RS201 RS202 RS203 RS204 RS205 RS206 RS207 Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V Average Rectifier Forward Current (Note 1) @ TA=50℃ IO(AV) Non-Repetitive Peak Surge Current 8.3 ms Single half sine-wave superimposed on rated load ( JEDEC Method) IFSM 50 A Forward Voltage (per element) ( IF =2.0 Amp) VFM 1.0 V Peak Reverse Current ( Rated DC Voltage, TC = 25℃) ( Rated DC Voltage, TC = 100℃) IR 10 0.5 uA mA Rating for Fusing( t<8.3 ms) I2t 10 A2s Typical Junction Capacitance per element (Note2) CJ 20 pF Rθ jA 28 k/W TJ , Tstg -65 to +150 ℃ Typical Thermal Resistance (note 3) Operating and Storage Temperature Range 2.0 Note: 1 Lead maintained at ambient temperature at a distance of 9.5 mm from the case. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 2 3. Thermal resistance junction to ambient, mounted on PC board with 12 mm copper pad. A KBP005/RS201 thru KBP10/RS207 NSTANTANEOUS FORWARD CURRENT (Amp.) FIG-2 TYPICAL FORWARD CHARACTERISITICS Ambient Temperature P.C.B Mounting 0.47”×0.47” (12×12 mm) Copper Pads 0.375”(9.5mm) Lead Length O TJ=25 C Pulse Width=300us 1% Duty Cycle CASE TEMPERATURE (℃) FORWARD VOLTAGE (Volts) FIG-3 PEAK FORWARD SURGE CURRENT FIG-4 TYPICAL JUNCTION CAPACITANCE O O TJ=25 C f=1MHz IIFSM, PEAK JUNCTION CAPACITANCE (PF) TJ=25 C Single Half Sine Wave (JEDEC Method) FWD SURGE CURRENT (A) AVERAGE FORWARD RECTIFIED CURRENT (Amp.) FIG-1 FORWARD CURRENT DERATING CURVE NUMBER OF CYCLES AT 60 Hz REVERSE VOLTAGE (Volts) IR, INSTANTANEOUS REVERSE CURRENT (uA) FIG-5 TYPICAL REVERSE CHARACTERISTICS O TJ=100 C O TJ=25 C PERCENT OF RATED REVERSE VOLTAGE (﹪)