Optical Communications Systems™ Datasheet Multi-Rate (10 Gbps) 80 km Single-Mode XFP Transceivers XFP-10GD-LR2 Highlights XFP transceiver Data Rates: 9.95 - 10.7 Gbps Compliant protocols: - Ethernet (10GBase-ZR/ZW [LAN/WAN]) - Fibre Channel (10 Gbps) - SDH (STM-64, STM-64 with FEC) - SONET (OC-192, OC-192 with FEC) Single-mode fiber 1550 nm 40 to 80 km Duplex LC connector Digital Diagnostics (SFF-8472) XFI Loopback Hot-swap Overview MRV Communications’ XFP transceivers provide the high speeds and compact dimensions that today’s demanding networks require while delivering the deployment flexibility and inventory control that network administrators demand. Designed to Multi-Source Agreement (MSA) standards for broadest compatibility, they perfectly match MRV’s wide range of optical transport solutions. Visit the MRV website at www.mrv.com or contact your nearest authorized MRV Communications dealer for more information. Specifications Overview Data Rate 9.95 - 10.7 Gbps Tx Wavelength 1550 nm Tx Power (Minimum) 0 dBm Tx Disable Yes Rx Wavelength Range 1270 - 1600 nm Rx Sensitivity @ 9.95 Gbps -24 dBm Rx Sensitivity @ 10.7 Gbps -23 dBm Rx Saturation -7 dBm Dispersion Penalty @ 9.95 Gbps 2 dBm Dispersion Penalty @ 10.7 Gbps 3 dBm Operating Temperature Range -5 to 75°C Power Consumption 3.5 Watt 1 Optical Communications Systems™ Datasheet Optical Specifications Parameter Symbol Minimum Maximum Unit Notes POUT 0 4 dBm - Center Wavelength λC 1530 1565 nm - Extinction Ratio ER 9 - dB - SSRmin 30 - dB - Txj - 0.1 UI 1 TxjRMS - 0.01 UI 2 RIN - -130 dB/Hz - Receiver Sensitivity @ 9.95 Gbps RSENS1 - -24 dBm 3, 4 Receiver Sensitivity @ 10.7 Gbps RSENS2 - -23 dBm 3 Maximum Input Power PMAX -7 - dBm - Transmitter Output Optical Power @ 9/125 SMF Sidemode Suppression Ratio Tx Jitter Generation (peak-to-peak) Tx Jitter Generation (RMS) Relative Intensity Noise Receiver Center Wavelength λC 1270 1600 nm - Path Penalty at 1600 ps/nm @ 9.95 Gbps DP1 - 2 dB 5 Path Penalty at 1600 ps/nm @ 10.7 Gbps DP2 - 3 dB 5 LOS Assert LOSA -37 - dBm - LOS De-Assert LOSD - -30 dBm - LOS Hysteresis - 0.5 - dB - Rrx - -27 dB - Receiver Reflectance Notes: 1. 2. 3. 4. 5. Measured with a host jitter of 50 mUI peak-to-peak. Measured with a host jitter of 7 mUI RMS. Measured at 1528-1600nm with worst ER; BER<10-12; PRBS31. Equivalent to –22.1 dBm OMA at ER = 9 dB. Dispersion penalty is measured in loopback using 18 ps/(nm*km) fiber (SMF-28). Absolute Maximum Rating Parameter Symbol Min. Max. Unit Notes Maximum Supply Voltage (1.8 V) VCC2 -0.5 2.0 V - Maximum Supply Voltage (3.3 V) VCC3 -0.5 4.0 V - Maximum Supply Voltage (5.0 V) VCC5 -0.5 6.0 V - Storage Temperature TS -40 85 °C - Case Operating Temperature TOP -5 70 °C - Symbol Min Max Unit Notes Bit Rate BR 9.95 10.7 Gbps 1 Bit Error Ratio BER - 10-12 - 2 Maximum Supported Link Length LMAX 20 80 km 1 General Specifications Parameter Notes: 1. 2. ITU-T G.959.1 P1L1-2D2, 10GBASE-ZR/ZW 10G Ethernet, 10G Fibre Channel, SONET OC-192 with FEC, ITU-T G.709. Tested with a 231 – 1 PRBS 2 Optical Communications Systems™ Datasheet Electrical Specifications Parameter Symbol Minimum Maximum Unit Notes Supply Voltage (1.8 V) VCC2 1.71 1.89 V - Supply Voltage (3.3 V) VCC3 3.13 3.46 V - Supply Voltage (5.0 V) VCC5 4.75 5.25 V - Supply Current - VCC2 Supply ICC2 - 750 mA - Supply Current - VCC3 Supply ICC3 - 400 mA - Supply Current - VCC5 Supply ICC5 - 350 mA - P - 3.5 W 1 Module Total Power Transmitter Input Differential Impedance Rin 80 120 Ω 2 Differential Data Input Swing Vin, pp 120 820 mV - Transmit Disable Voltage VD 2.0 VCC V 3 Transmit Enable Voltage VEN GND GND+0.8 V - - - 10 us - Vout, pp 340 850 mV 4 Data Output Rise Time tr - 38 ps 5 Data Output Fall Time tf - 38 ps 5 LOS Fault VLOS fault VCC - 0.5 VCC HOST V 6 LOS Normal VLOS norm GND GND + 0.5 V Transmit Disable Assert Time Receiver Differential Data Output Swing Power Supply Rejection Notes: 1. 2. 3. 4. 5. 6. 7. PSR See Note 6 Below 6 7 Maximum total power value is specified across the full temperature and voltage range. After internal AC coupling. Or open circuit. Into 100 ohms differential termination. 20 – 80 % Loss Of Signal is open collector to be pulled up with a 4.7 k – 10 kohm resistor to 3.15 – 3.6 V. Logic 0 indicates normal operation; logic 1 indicates no signal detected. Per Section 2.7.1. in the XFP MSA Specification. 3 Optical Communications Systems™ Datasheet Host Board Connector Legend Pin Logic Symbol Name/Description Note 1 - GND Module Ground 1 2 - VEE5 Optional -5.2 V Power Supply (Not Required) - 3 LVTTL-I Mod_DeSel Module De-Select; When Held Low Allows Module to Respond to 2-Wire Serial Interface 2 - 4 LVTTL-O Interrupt Interrupt (bar); Indicates Presence of an Important Condition Which Can Be Read Over the 2-Wire Serial Interface 5 LVTTL-I TX_DIS Transmitter Disable; Transmitter Laser Source Turned Off 6 - VCC5 +5 V Power Supply - 7 - GND Module Ground 1 8 - VCC3 +3.3 V Power Supply - 9 - VCC3 +3.3 V Power Supply - 10 LVTTL-I SCL 2-Wire Serial Interface Clock 2 11 LVTTL-I/O SDA 2-Wire Serial Interface Data Line 2 12 LVTTL-O Mod_Abs Module Absent; Indicates Module is Not Present. Grounded in the Module 2 13 LVTTL-O Mod_NR Module Not Ready; MRV defines it as a logical OR between RX_LOS and Loss of Lock in TX/RX. 2 14 LVTTL-O RX_LOS Receiver Loss of Signal Indicator 2 15 - GND Module Ground 1 16 - GND Module Ground 1 17 CML-O RD- Receiver Inverted Data Output - 18 CML-O RD+ Receiver Non-Inverted Data Output - 19 - GND Module Ground 1 20 - VCC2 +1.8 V Power Supply - 21 LVTTL-I P_Down/RST Power Down; When High, Places the Module in the Low Power Stand-By Mode and on the Falling Edge of P_Down Initiates a Module Reset - Reset; The Falling Edge Initiates a Complete Reset of the Module Including the 2-Wire Serial Interface, Equivalent to a Power Cycle. 22 - VCC2 +1.8 V Power Supply - 23 - GND Module Ground 1 24 PECL-I RefCLK+ Reference Clock Non-Inverted Input, AC Coupled on the Host Board (Not Required) - 25 PECL-I RefCLK- Reference Clock Inverted Input, AC Coupled on the Host Board (Not Required) - 26 - GND Module Ground 1 27 - GND Module Ground 1 28 CML-I TD- Transmitter Inverted Data Input - 29 CML-I TD+ Transmitter Non-Inverted Data Input - 30 - GND Module Ground 1 Notes: 1. 2. Module circuit ground is isolated from module chassis ground within the module. Open collector; should be pulled up with 4.7 k – 10 kohms on host board to a voltage between 3.15 V and 3.6 V. 4 Optical Communications Systems™ Datasheet Host Board Connector Pinout Mechanical Drawing 77.95 22.15 18.35 13.30 8.50 LATCHED 16.00 UNLATCHED 20.85 39.00 R1.00 XFP Transceiver (dimensions are in mm) 5 Optical Communications Systems™ Datasheet Data Rate (Gbps) Wavelength (nm) Bail Latch Color Distance Range (km) OC-192/STM-64, 10GE or 10G FC, single-mode XFP transceiver with Digital Diagnostics. 9.95 - 10.7 1550 White 40 - 80 Model Description Ordering Information XFP-10GD-LR2 Regulatory and Industry Compliances Class 1 Laser Product, complies with EN 60825-1 and 21 CFR 1040.10 except for deviations pursuant to Laser Notice No. 50. dated June 24, 2007 MSA INF-8077i; Digital Diagnostic SFF-8472; ITU-T G.959.1 P1L1-2D2, G.709 Certified by one or more of the following agencies: TÜV, UL, CSA RoHS Directive; China RoHS; California RoHS Law, REACH Directive SVHC; WEEE Directive The Quality Management System is certified to ISO 9001 by QMI-SAI Global The Environmental Management System is in compliance with ISO 14001 Warnings Handling Precautions: This device is susceptible to damage as a result of electrostatic descharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indeirect radiation. MRV has more than 50 offices throughout the world. Addresses, phone numbers and fax numbers are listed at www.mrv.com. Please e-mail us at [email protected] or call us for assistance. MRV Los Angeles 20415 Nordhoff Street Chatsworth, CA 91311 800-338-5316 818-773-0900 MRV Boston 300 Apollo Drive Chelmsford, MA 01824 800-338-5316 978-674-6800 MRV International Business Park Moerfelden Waldeckerstrasse 13 64546 Moerfelden-Walldorf Germany Tel. (49) 6105/2070 Fax (49) 6105/207-100 All statements, technical information, and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information. MRV Communications and the MRV Communications logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders. MRV-OP-XFP10GDLR2-063010 3020129-001 Rev. A3 Copyright ©2010 MRV Communications, Inc. All Rights Reserved.