Datasheet LambdaDriver®–10Gbps - Dual Transponder Module with FEC (TM2-XSFPFM) Features 10GE, OC 192/STM64 and 8GFC protocols operatiblity OTU2 repeater mode FEC/EFEC capabilities G.709 performance monitoring Line and Diagnostics Loop-back tests XFP/SFP+ digital diagnostics Link Integrity Notification (LIN) Self-healing protection Eye safe - ALS/APR Hot swappable Applications TM2-XSFPFM Overview The TM2-XSFPFM is a single slot dual transponder module of the LambdaDriver Optical Tranport System. It incorporates two independent 10Gbps transponders which support transparent transport of 10Gbps and 8G FC over OTU2 transport layer.The access ports can be fitted with SFP+ transceivers and the line ports with XFP transceivers supporting any standard SFP+ and XFP, including DWDM Tunable types. A key feature of each of the channels is support of the G.709 FEC protocol as well as Enhanced FEC (EFEC) with superior error correction performance. The FEC functionality significantly extends the overall distance reach of a 10Gbps rate link while maintaining the expected industry standard BER performance. FEC and EFEC modes are user selectable with the system management card. Performance monitoring is supported for both access and trunk ports, providing the relevant conditions and alarms at each receive side. Statistics for current 15 minutes interval and up to 96 previous intervals can be viewed. DWDM networks with end-to-end performance monitoring Upgrade of existing CWDM/DWDM networks to extend optical operating range and speed Line and Diagnostic Loop-back functionality is supported and provides an invaluable tool for troubleshooting and maintenance operations in a live network. The Diagnostics loop-back function checks the integrity of the internal ports circuitry while the Line loop-back is used to check the fiber connections integrity. The Line loop-back and the Diagnostics loop-back are available for both the access (client) and trunk ports. The Link Integrity Notification (LIN) function allows the terminal equipment to detect link failure in the path between the two terminal equipment units regardless of the location of the failure. The integrated Automatic Laser Shutdown (ALS/APR) feature automatically reduces the optical power of the transmitter to an eye safe level in case of a broken link. LD1600 LD1600 LD1600 ETH1 TM-SFP TX RX ACCESS DWL3 CH-25 DWL3 CH-25 CONSOLE CONSOLE ACT ALARM LINK ALARM ACT LINK ACT TM-SFP TM-SFP TX RX WDM TX RX WDM TX RX ACCESS TX RX ACCESS TX RX WDM TX RX ACCESS DWL3 CH-25 DWL3 CH-25 EM1600-MGT EM1600-MGT LINK TM-SFP TX RX WDM TX RX ACCESS DWDM CH-21 PWR MGT PWR ACT ETH1 LINK LINK MGT TX ETH1 TX ACT RX ACT LINK RX ACT ETH2 TX RX TX RX ACCESS DWDM CH-21 DWL3 CH-21 DWL3 CH-25 ACT ACT TM-SFP TM-SFP LINK ETH2 TX RX LINK LINK LINK RX ACT LINK ETH3 ETH1 TX RX ACCESS DWDM CH-21 TM-SFP TX RX WDM TX RX ACCESS RX LINK TX ACT ETH4 TX RX ACCESS LambdaDriver-1600P ETH2 ETH2 TM-SFP MGT TX ACT ACT ETH3 CONSOLE ETH2 LINK TM-SFP LINK ACT LINK TM-SFP TX RX WDM TX RX WDM TX RX WDM TX RX ACCESS TX RX ACCESS TX RX ACCESS DWDM CH-21 DWL3 CH-25 DWL3 CH-25 LINK ETH4 PWR ETH2 LINK ETH3 ACT ETH3 DWL3 CH-25 TX RX WDM ETH4 TM-SFP TX RX WDM ETH4 CONSOLE ALARM LINK RX DWL3 CH-21 ACT TM-SFP TX RX WDM TM-SFP TX RX WDM EM1600-MGT ACT MGT TX DWDM CH-21 ACT LINK ACT CONSOLE EM1600-MGT ACT TX RX ACCESS RX LINK CONSOLE TX RX WDM TX RX ACCESS RX ALARM RX LINK TX ACT ALARM TM-SFP TX RX WDM TX RX ACCESS LINK LINK LINK ETH3 TM-SFP ACT MGT TX ACT TX DWL3 CH-25 ETH1 ACT PWR ETH1 ETH1 ETH1 ETH2 ETH2 ACT TX LINK EM1600-MGT RX LINK RX ETH3 ETH3 LINK MGT TX ACT PWR ACT EM1600-MGT PWR ETH4 DWL3 CH-25 TX RX ACCESS DWL3 CH-21 LambdaDriver-1600P RX LINK TM-SFP TX RX WDM TX RX ACCESS DWL3 CH-25 ETH4 TM-SFP TX RX WDM TX RX ACCESS DWDM CH-21 TX RX ACCESS DWDM CH-21 RX LINK TX ACT TX RX WDM ACT TM-SFP TX RX WDM TX RX ACCESS TM-SFP TX RX WDM TX RX ACCESS MGT TX ACT RX LINK ETH3 PWR RX LINK TX ACT ETH4 MGT TX ACT ETH4 PWR DWL3 CH-25 TX RX WDM CONSOLE TX RX ACCESS DWL3 CH-21 TM-SFP TX RX WDM CONSOLE TX RX ACCESS DWDM CH-21 EM1600-MGT ALARM TX RX ACCESS EM1600-MGT LD1600 LambdaDriver-1600P TM-SFP TM-SFP TX RX WDM ALARM TM-SFP TX RX WDM ALARM LambdaDriver-1600P TM-SFP TX RX WDM LINK Primary Secondary Y-cable Y-cable TM2-XSFPFM TM2-XSFPFM Dual Transponder TM2-XFPF TM2-XSFPFM TM2-XSFPFM Redundant Link Transponder Not sure what solution best fits your needs? Visit www.mrv.com or e-mail us at [email protected] The following three redundancy protection modes are available: - Redundancy between two adjacent TM2-XSFPFMs using Y-cables. In this mode, one TM2-XSFPFM is active while the adjacent TM2-XSFPFM is in standby. - Redundancy between two transponders of the same TM2-XSFPFM using Y-cables. In this mode, one transponder is active while the second is in standby. - Redundancy between two transponders of the same TM2-XSFPFM using self-healing instead of Y-cables. In this mode, one access port and one line port are active while the second line port is in standby. In repeater mode, 3R retiming/reshaping is appled to an OTU2 rate access client (GFEC only) transported over the line port either at GFEC or EFEC OTU2 rate. The modules are manageable with the LambdaDriver management module either locally with RS232 CLI access or remotely with Telnet or SSH station or with and SNMP Manager (e.g. MegaVision ProTM or Pro-Vision®). Enviromental Operating Temperature -5 to 50 0C (23 to 122 0F) Storage Temperature -10 to 70 0C (14 to 158 0F) Relative Humidity 90% max, non-condensing Dimensions (W x H x D) 26.93 mm (1.06 In); 130.7 (5.145 In); 227.5mm (8.956 In) Weight 0.55 Kg (1.21 lb) MTBF @25 C/77 F 605656 hr Connectors Per the SFP+/XFP Power Consumption Module: 15.5W (53BTU/hr) 0 0 SFP+: 1W (3.4 BTU/hr) XFP: 3.5W (12BTU/hr) Technical Specifications Regulatory Compliance Order Info Line Rate G.709 Power Budget Gain EFEC Power Budget Gain Optical parameters Product TM2-XSFPFM FCC Part 15 (Class A); EMC Directive: Emission (Class A) and Immunity; RoHS2 Directive, REACH SVHC, WEEE Directive. 10.709Gbps + 6dB + 8dB Per the XFP/SFP+ Description SFP+ access, XFP Line ports, Dual Transponder with FEC for 10Gbps. MRV has more than 50 offices throughout the world. Addresses, phone numbers, and fax numbers are listed at www.mrv.com. Please e-mail us at [email protected] or call us for assistance. MRV (West Coast USA) 20415 Nordhoff St. Chatsworth, CA 91311 800-338-5316 818-773-0900 MRV (East Coast USA) 295 Foster St. Littleton, MA 01460 800-338-5316 978-952-4700 MRV (International) Bussiness Park Moerfelden Waldeckerstrasse 13 64546 Moerfelden-Walldorf Germany Tel. (49) 6105/2070 Fax. (49) 6105/207-100 All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information. MRV Communications and the MRV Communications logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders. MRV-LD-TM2XSFPFM Rev.1 01-13 Copyright ©2013 MRV Communications, Inc. All Rights Reserved.