Datamate Connectors If you are unable to specify the connectors you require from our Off-The-Shelf range of Datamate Mix-Tek (pages 76 to 81), then customise your own Mix-Tek part number. All items in this range are made-to-order, and may be subject to minimum order quantities and current availability conditions. part numbering system M80 - X #X XX XX #X - XX - XXX - XX - XXX DATAMATE MIX-TEK Product Range PART NUMBER OF SPECIAL CONTACTS AFTER FINAL SIGNAL CONTACT Gender 4 Female (Socket) 5 Male (Plug) See page 86, or 000 if none loaded Signal Contact STYLE 00 No Signal Contacts NUMBER OF SPECIAL CONTACTS AFTER FINAL SIGNAL CONTACT T1 Vertical PC Tail, 3mm tail 00 to 12 T2 Vertical PC Tail, 4.5mm tail L1 Horizontal PC Tail, 3mm tail (Male only) PART NUMBER OF SPECIAL CONTACTS BEFORE SIGNAL CONTACT No. 1 L2 Horizontal PC Tail, 4.5mm tail (Male only) See page 86, or 000 if none loaded C1 Crimp 24-28 AWG (Small Bore) NUMBER OF SPECIAL CONTACTS BEFORE SIGNAL CONTACT No. 1 D1 Crimp 22 AWG (Large Bore) E1 Crimp 28-32 AWG (Extra Small Bore) S1 Vertical Surface Mount S2 Horizontal Surface Mount (Male only) 00 to 12 Jackscrew VarianT No. of signal contacts 00, 02 to 50 (Must be even number) 00 None assembled Fx Female Jackscrews – see page 84 Mx Male Jackscrews – see page 85 SIGNAL CONTACT FINISH 00 No Signal Contacts 01 Gold + Tin/Lead 05 Gold 22 Gold + Tin/Lead Male PC Tail only 42 Gold + Tin All PC Tail & Female Crimp Female PC Tail only Note: If special contacts are being ordered separately, and cavities in mould are to be left empty, then the Special Contact part numbers should be 000. EXAMPLES: M80-5T11422M1-02-311-02-311 DIL Male Vertical with Jackscrew, no Board Mount, 3mm PC Tail – 2 Coax, 14 Signal, 2 Coax. M80-4C12005F1-04-326-00-000 DIL Female Crimp with Slotted Hex Jackscrews, Small Bore – 4 Power (for 14 AWG), 20 Signal. M80-4D11042F2-04-305-02-308 DIL Female Crimp with Hex Socket Jackscrews, Large Bore – 4 Special cavity, 10 Signal, 2 Special cavity. Supplied with 4-off Female Straight Crimp Coax for Ø2mm cable, and 2-off Female 90° Crimp Coax for Ø2mm cable. Max. number of contacts per connector: Special contacts only – 12 off, Signal contacts only – 50 off. All dimensions in mm. www.harwin.com 82 Datamate Connectors Spare Signal Crimp Contacts DATAMATE MIX-TEK Crimp contacts are supplied with all Mix-Tek connectors – use the order codes below for extra crimp contacts. For crimp and insertion tools, see pages 87 to 89. FEMALE Extra Small Bore (28 – 32 AWG): Large Bore (22 AWG): 7.45 7.45 7.45 Extra Small Bore Ident Groove Small Bore (24 – 28 AWG): Wire Stripping Details Ø1.10 max (Ø0.75 max for Extra Small Bore) Small Bore Ident Groove Small Bore Ident Groove 2.00 nominal Male Large Bore (22 AWG): 3.50 3.50 4.15 4.10 4.15 4.10 Wire Stripping Details Ø1.10 max Small Bore (24 – 28 AWG): 2.00 nominal Small Bore Ident Groove Small Bore Ident Groove HOW TO ORDER M80 - XXX 00 XX Finish Series code TYPE 011 Female Large Bore (22 AWG) 194 Male Large Bore (22 AWG) 013 Female Small Bore (24-28 AWG) 195 Male Small Bore (24-28 AWG) 019 Female Extra Small Bore (28-32 AWG) All dimensions in mm. www.harwin.com 83 01 Gold + Tin (Female only) 05 Gold Datamate – Jackscrews Female 00 None assembled DATAMATE MIX-TEK M2 Hexagonal Slotted Jackscrew (floating) F1 3.00 A/F M2 Hexagonal Socket Jackscrew (floating) F2 2.00 A/F Ø3.50 6.00 F3 Guide Pin Jackscrew with Panel Mount 3.00 M2 Ø4.00 Ø3.00 FC www.harwin.com Ø3.00 10.50 10.50 84 5.00 Jackscrew Datamate – Jackscrews Male M2 M2 3.00 00 M2 Ø4.00 DATAMATE MIX-TEK None assembled M2 M2 3.00 Jackscrew nut only M1 M2 Ø4.00 M2 M2 M2 or M3 Jackscrew with Vertical Board Mount, slotted nut 3.00 M2 Ø4.00 M2 M2 M5 or M7 M2 = 3.50mm stud length M3 = 5.00mm stud length Jackscrew with Horizontal Board Mount, 5mm bolt length M2 M2 M5 = Slotted bolt M7 = Hex Socket bolt HM1383: M80 MALE HORIZONTAL WITH BOARD MOUNT SOCKET C MC www.harwin.com Jackscrew Retainer 85 Datamate – Special Contacts COAX MALE FEMALE DATAMATE MIX-TEK 301 or 302 Vertical PC Tail Vertical PC Tail 311 or 312 301 = 3.00mm tail 302 = 4.50mm tail 311 = 3.00mm tail 312 = 4.50mm tail Horizontal PC Tail 313 or 314 305 306 307 308 or 309 www.harwin.com Straight Crimp 313 = 3.00mm tail 314 = 4.50mm tail Straight Crimp 315 316 317 305 = Ø2.00mm cable 306 = Ø2.40mm cable 307 = Ø2.70mm cable 90° Crimp 315 = Ø2.00mm cable 316 = Ø2.40mm cable 317 = Ø2.70mm cable 90° Crimp 318 or 319 308 = Ø2.00mm cable 309 = Ø2.70mm cable CABLE SIZE CABLE TYPE Ø2.00mm cable RG 178 Ø2.40mm cable Ø2.70mm cable 318 = Ø2.00mm cable 319 = Ø2.70mm cable CONTACTS 305 315 308 318 PTFE Cellular 306 316 RG 174 RG 179 RG 316 307 317 309 319 86 Datamate – Special Contacts POWER MALE FEMALE DATAMATE MIX-TEK 321 or 322 323 or 324 325 326 327 328 329 32A 32B 32C Vertical PC Tail Vertical PC Tail 331 or 332 321 = 3.50mm tail 322 = 5.00mm tail Horizontal PC Tail 331 = 3.50mm tail 332 = 5.00mm tail Horizontal PC Tail 333 or 334 323 = 3.50mm tail 324 = 5.00mm tail Straight Solder 325 = 12 AWG cable 326 = 14 AWG cable 327 = 16 AWG cable Straight Crimp 328 = 18 AWG cable 329 = 20 AWG cable 335 336 337 338 339 333 = 3.50mm tail 334 = 5.00mm tail Straight Solder 335 = 12 AWG cable 336 = 14 AWG cable 337 = 16 AWG cable Straight Crimp 338 = 18 AWG cable 339 = 20 AWG cable 90° Solder 32A = 12 AWG cable 32B = 14 AWG cable 32C = 16 AWG cable HIGH POWER MALE FEMALE PF1 or PF2 PF3 or PF4 PF5 www.harwin.com Vertical PC Tail PM1 or PM2 PF1 = 3.50mm tail PF2 = 5.00mm tail Horizontal PC Tail PF3 = 3.50mm tail PF4 = 5.00mm tail Straight Solder 10 AWG cable 86a Vertical PC Tail PM1 = 3.50mm tail PM2 = 5.00mm tail Horizontal PC Tail PM3 or PM4 PM3 = 3.50mm tail PM4 = 5.00mm tail PM5 Straight Solder 10 AWG cable