Archer Connectors – M50 IDC Specification Materials Environmental Mouldings:PC Tail, SMT: LCP, UL94V-0 IDC Cable: PBT, UL94V-0 Contacts: Copper Alloy Operating temperature: PC Tail, SMT: -55°C to +125°C IDC Cable Connectors: -40°C to +105°C Cable Assembly: -20°C to +105°C Finish: M50-380: Gold on contact area Solderability: 245°C for 5 seconds Others: Gold on contact area, Soldering heat resistance:260°C for 10 seconds Tin on tails Current rating: M50-330, 91X: 1A per contact M50-355, 365: 1.75A per contact M50-380, 90X: 0.5A per contact Voltage proof: M50-90X/91X: 300V DC for 1 minute Others: 1,000V AC for 1 minute Contact resistance: 30 mΩ max Insulation resistance: M50-90X, 91X: 5 MΩ min Others: 1,000 MΩ min Durability: 100 operations Insertion force (max): 1.0N per contact Withdrawal force (min): 0.15N per contact 1.27mm (.050") Pitch Mechanical Electrical All preferred sizes of this range are held in stock. Check www.harwin.com for availability. Mating Profiles MALE FEMALE VERTICAL PC TAIL VERTICAL SMT M50-355 CABLE M50-365 M50-380 Female Female 11.55 11.30 CABLE M50-330 M50-330 M50-330 All dimensions in mm. www.harwin.com 10.20 8.51 8.26 113 Archer Connectors – M50 IDC Female Cable Connector & Cable Assembly Suitable for use with male vertical latching connectors shown on page 115. IDC Contact for high speed termination. Polarised to prevent mis-mating. Secure cable retention with positive latching to header. Standard cable assembly lengths from stock. FEMALE IDC FEMALE-TO-FEMALE CABLE 1.27mm (.050") PITCH A A B B 1.27 5.10 1.27 1.90 4.05 Cable Length 3.20 1.90 0.635 3.05 CALCULATION A B + 5.47 B 1.27 x (No. of contacts per row - 1) HOW TO ORDER M50 - XXX XX 42 SERIES CODE FINISH 42 TYPE 330 Female IDC Connector 910 150mm Cable Assembly 911 300mm Cable Assembly NO. OF CONTACTS PER ROW All dimensions in mm. www.harwin.com Gold + Tin 114 05, 10, 13, 17, 20, 25 All 06, 07, 08 M50-330 only Archer Connectors – M50 IDC Male Vertical Latching Connectors Suitable for use with female cable connectors shown on page 114. Small footprint. Shrouded for robust pin protection. Polarised to prevent mis-mating. Secure, positive latch & ejection system. Through PCB and SMT in tape and reel. PC TAIL A 1.27 1.27mm (.050") PITCH B 6.67 1.27 2.50 11.30 Ø 0.70 Recommended PC Board Pattern 1.27 0.40 square 1.27 B 2.72 CALCULATION SURFACE MOUNT A B 1.27 A B + 15.75 B B 1.27 x (Number of contacts per row - 1) C B + 8.64 B 1.27 6.67 0.74 4.09 0.40 square 9.04 2.50 2.41 11.55 1.27 1.52 C Ø 1.19 2.11 C 7.52 Recommended PC Board Pattern HOW TO ORDER M50 - 3 X 5 XX 42 R PACKAGING SERIES CODE R TYPE Blank 5 PC Tail 6 Surface Mount Loose (M50-355) FINISH NO. OF CONTACTS PER ROW 42 05, 06, 07, 08, 10, 13, 17, 20, 25 All dimensions in mm. www.harwin.com Tape & Reeled (M50-365) 115 Gold + Tin Archer Connectors – M50 IDC Male Cable Connectors & Cable Assembly Male transitional cable connector suitable for soldering directly to PCB, permits cost effective cable to PCB attachment. IDC contact for high speed termination. Suitable for mating with other sockets from the Archer range. Low profile, small footprint. MALE IDC MALE-TO-FEMALE CABLE 1.27mm (.050") PITCH A 3.00 A B 1.90 0.635 5.10 3.20 1.27 0.40 square Cable Length 3.10 1.27 B B 1.27 3.10 5.10 1.27 CALCULATION Ø 0.70 Recommended PC Board Pattern A B + 5.47 B 1.27 x (No. of contacts per row - 1) HOW TO ORDER M50 - XXX XX 42 SERIES CODE FINISH 42 TYPE Gold + Tin 380 Male IDC Connector NO. OF CONTACTS PER ROW 901 150mm Cable Assembly 05, 10, 13, 17, 20, 25 All 902 300mm Cable Assembly 06, 07, 08 M50-380 only All dimensions in mm. www.harwin.com 116