Datamate Specification Materials Mechanical Mouldings:Glass-filled thermoplastic UL94V-0 Female contacts:Brass shell, with Beryllium Copper inner contact Male contacts: Phosphor bronze Finish: See individual pages Durability: 500 operations Insertion force (max): 1.0N Withdrawal force (min):0.2N Signal crimp accommodation:22 AWG to 28 AWG BS 3G 210 Type A or MIL-DTL-16878/6 Type ET Electrical Environmental DATAMATE J-TEK Current (individual contacts in isolation):3.3A max (at 25°C) 2.6A max (at 85°C) All contacts simultaneously:3.0A max (at 25°C) 2.2A max (at 85°C) Working Voltage (at sea level 1013 mbar): 800V DC or ACrms Proof Voltage (at sea level 1013 mbar): 1200V DC or ACrms Contact resistance (initial): 20 mΩ max Contact resistance (after conditioning): 25 mΩ max Insulation resistance (initial): 1000 MΩ min Insulation resistance (after conditioning): 100 MΩ min Environmental classification: 55/125/56 days at 95% RH Operational temperature: -55ºC to +125ºC *Vibration sensitivity:10Hz to 2000Hz, 0.75mm, 98m/s2 (10G), duration 6h *Bump severity:390m/s2 (40G), 4000 ±10 bumps *Shock severity: 981m/s2 (100G) for 6ms *Acceleration severity: 490m/s2 (50G) * Tested with connectors with Jackscrews. Pin Numbering 3 – Row 6 1 18 13 Contact numbering is shown looking onto mating face of male connector. Mating Profiles FEMALE HM1398: M83 J-Tek Contact Orientation VERTICAL PC TAIL MALE CRIMP M83-LFTXxxNXX M83-LFC1xxNXX VERTICAL PC TAIL M83-LFD1xxNXX 12.85 10.65 M83-LMTXxxNXX M83-LMTXxxNXX M83-LFTXxxNXX 15.80 M83-LFC1xxNXX 18.00 M83-LFD1xxNXX HORIZONTAL PC TAIL M83-LMLXxxNXX All dimensions in mm. www.harwin.com 66 M83-LMLXxxNXX Datamate Connectors Female Vertical PC Tail Calculation FEmale VERTICal A B + 15 B (Total no. of contacts - 3) x 2/3 C B+9 C B 2.00 8.00 2.00 C No. 1 contact 3.85 ø0.65 ø3.70 min min 2.00 B 3.00 Recommended PC Board Pattern HM1287: M83-LFTXFXNXX-0000-000 4.50 ø 0.50 2.00 A HM1286: M83-LFTXF2NXX-0000-000 2.00 A/F Hex Socket HOW TO ORDER M83 - LF T1 F2 N XX - 0000 - 000 total No. of contacts 18, 27, 36, 54, 60, 96 Series code JACKSCREW TAIL T1 F2 3mm Tail All dimensions in mm. www.harwin.com 67 Hex Socket Jackscrew Datamate J-TEK Low-force 4-finger Beryllium Copper contact clip. Fully shrouded contacts. Polarised mouldings. All contacts are gold finish for full RoHS compliance. Mates with male connectors shown on pages 69 and 70. M83 Datamate Connectors Female Crimp DATAMATE J-TEK Part numbers are for a kit of housing and contacts. Spare contacts are available. Low-force 4-finger Beryllium Copper contact clip. Fully shrouded contacts, rear-insertable. Crimp instruction sheets & video available online at www.harwin.com. Mates with male connectors shown on pages 69 and 70. Calculation FEmale CRIMP SpARE Contacts A B + 15 B (Total no. of contacts - 3) x 2/3 C B+9 7.45 C B C 2.00 B C B 2.00 2.00 2.00 2.00 Wire Size 2.00 Part Number Small Bore Ident Groove M83-0110005 22 AWG M83-0130005 24-28 AWG No. 1 contact 3.85 tools No. 1 contactNo. 1 contact 3.85 3.85 Recommended Crimp Tool – M22520/2-01 Positioner – T5747 Contact Insertion/Removal Tool – Z80-280 6.70 See pages 87 to 89 6.70 A A 8.00 A 6.70 Instruction sheets available at www.harwin.com/downloads/instructions 8.00 Wire Stripping Details 8.00 ø1.10 max HM1288: M83LFXXFXNXX-0000-000 2.00 nominal HM1288: M83LFXXFXNXX-0000-000 HM1288: M83LFXXFXNXX-0000-000 HOW TO ORDER M83 - LF X1 F2 N XX - 0000 - 000 total No. of contacts 18, 27, 36, 54, 60, 96 Series code JACKSCREW CRIMPS C1 Small Bore (24-28 AWG) D1 Large Bore (22 AWG) F2 All dimensions in mm. www.harwin.com 68 Hex Socket Jackscrew Datamate Connectors Male Vertical PC Tail Calculation male VERTICal A B + 15 B (Total no. of contacts - 3) x 2/3 C B+9 C C B 2.00 2.00 2.00 ø2.20 min No. 1 contact ø0.65 min B Recommended PC Board Pattern 7.70 M2 6.10 3.50 Ø0.50 2.00 3.00 M2 A HOW TO ORDER M83 - LM T1 M2 N XX - 0000 - 000 total No. of contacts 18, 27, 36, 54, 60, 96 Series code JACKSCREW TAIL T1 M2 3mm Tail All dimensions in mm. www.harwin.com 69 Board Mount Jackscrew Datamate J-TEK Board Mount nuts to be tightened to a maximum torque of 23cmN. Fully shrouded contacts. Polarised mouldings. All contacts are gold finish for full RoHS compliance. Mates with female connectors shown on pages 67 and 68. Datamate Connectors Male Horizontal PC Tail Board Mount screws to be tightened to a maximum torque of 23cmN. Suitable for motherboard/daughterboard configurations. Fully shrouded contacts, polarised mouldings. All contacts are gold finish for full RoHS compliance. Mates with female connectors shown on pages 67 and 68. DATAMATE J-TEK Calculation male horizontal A B + 15 B (Total no. of contacts - 3) x 2/3 C B+9 C 2.00 2.00 ø2.20 min ø0.65 min B Recommended PC Board Pattern HOW TO ORDER M83 - LM L3 M7 N XX - 0000 - 000 total No. of contacts 18, 27, 36, 54, 60, 96 Series code JACKSCREW TAIL L3 M7 4mm Tail All dimensions in mm. www.harwin.com 70 Hex Socket Board Mount