No. 1 LTM8027 113LD 15mm X 15mm X 4.32mm (TABLE OF MATERIAL DECLARATION) The LTM8027 is RoHS compliant per EU RoHS Directive 2003/95/EC. It contains less than 100ppm cadmium (Cd)and less than 1,000ppm of each - lead (Pb), mercury (Hg),hexavalent chromium (Cr+), polybrominated biphenyl (PBB) and polybrominated diphenyl ether (PBDE) Material Mass Component Materials Analysis (weight %) Materials Analysis (element) CAS Number Part Name Material Name (gram) Weight (gram) Barium Compounds 7727-43-7 0.00251 1.20 Substrate Circuit Board 0.2089 13776-74-4, 76310.03249 15.55 Filler Substances (Silica Crystalline) 86-9 Copper Metal 7440-50-8 0.13500 64.62 Copper Compounds 1328-53-6 0.00004 0.02 7440-38-2, 7440Ecotoxic substances 0.00003 0.01 28-0 Gold metal or alloy 7440-57-5 0.00100 0.48 Nickel 7440-02-0 0.00466 2.23 Zinc 7440-66-6 0.00031 0.15 Bismaleimide/Triazine Resin 0.02553 12.22 Acrylic Resin 0.00543 2.60 Epoxy Resin 0.00002 0.01 Chromium(III) Oxide 1308-38-9 0.00001 0.00 Silica crytalline 14808-60-7 0.00065 0.31 Silica amorphous 7631-86-9 0.00003 0.01 2 Solder Paste 3 Epoxy 0.0014 4 Passive/Active Components 0.5324 5 6 7 Active Ics Wire Encapsulation Alloy Silicon Gold Epoxy Resin 0.1665 0.0153 0.0018 1.6759 Talc;not containing fibers like asbestos 14807-96-9 0.00033 0.16 Aromatic Carbonyl compounds Cyanoguanidine Calcium caobonate Amine compounds Leveling agent and others Sn Sb Di-ester resin Functionalized ester Silver Capacitor Resistor Inductor Diode Silicon Au Fused Silica Epoxy Resin Phenol Resin Crytalline Silica Carbon Black Metal Hydroxide 461-58-5 471-34-1 7440-31-5 7440-36-0 7440-22-4 7440-21-3 7440-57-5 60676-86-0 14808-60-7 1333-86-4 - 0.00056 0.00001 0.00000 0.00009 0.00021 0.15816 0.00832 0.00011 0.00011 0.00118 0.05354 0.02105 0.45782 0.00000 0.01530 0.00180 1.29378 0.14915 0.14915 0.05028 0.00838 0.02514 0.27 0.01 0.00 0.04 0.10 95.00 5.00 8.00 8.00 84.00 10.06 3.95 85.99 0.00 100.00 99.99 77.20 8.90 8.90 3.00 0.50 1.50 Total Package Weight 2.6022 Note: Composition derived from MSDS and material C of C from Vendors Component Weight based on assembly of generic parts