ETC PFE240D25

Series PF, PowerFin
TM
Up to 25Amp • 120/240, 380, 480 Vac • AC Output
• Ultra High Steady State
Current Rating
Crydom's PowerFin series delivers the
highest ratings of any single in-line package (SIP). The integral heat sink design
can operate at 25 amps RMS in forced air
at 85˚ûC case temp. With natural convection in free air, it rates 10 amps RMS at
25û˚C ambient.
TM
• Low Leakage (Off- State )
• SCR Output
• AC or DC Control
Built-in advantages include Surface Mount
Technology
and
SCR
output.
Manufactured in Crydom's ISO 9001
Certified facility for optimum product
performance and reliability.
• Crydom's Patented Design
MODEL NUMBERS
AC CONTROL (120Vac)
(24Vac)
PF240A25
PFE240A25
(5Vdc)
(24Vdc)
PF240D25
PFE240D25
PF380D25
PFE380D25
PF480D25
PFE480D25
12-280
48-530
48-660
DC CONTROL
OUTPUT SPECIFICATIONS ➀
Operating Voltage (47-63 Hz) [Vrms]
Forced Air.06-25 ➂
Convection Air .06-10
Load Current Range [Arms]
Transient Overvoltage [Vpk]
600
1200
1200
Max. Surge Current, (16.6ms) [Apk]
250
250
250
Max. On-State Voltage Drop @ Rated Current [Vpk]
1.6
1.6
1.6
Maximum I2 t for Fusing, (8.3 msec.) [A2sec]
260
260
260
Max. Off-State Leakage Current @ Rated Voltage [mArms]
0.1
0.1
0.1
Min. Off-State dv/dt @ Max. Rated Voltage [V/µsec] ➁
500
500
500
Max. Turn-On Time ➃
1/2 Cycle (DC Control), 10.0 msec (AC Control)
Max. Turn-Off Time
1/2 Cycle (DC Control), 40.0 msec (AC Control)
0.5
Power Factor (Min.) with Max. Load
INPUT SPECIFICATIONS ➀
Nominal Voltage
0.5
DC CONTROL
5Vdc
5Vdc
PF240D25
Control Voltage Range
0.5
AC CONTROL
120Vac
24Vac
PF380D25
PF480D25
24Vdc
PFE240D25
PFE380D25
PFE480D25
PF240A25
PFE240A25
3-15 Vdc
4-15 Vdc
15-32 Vdc
90-140 Vrms
18-36 Vrms
Max. Turn-On Voltage
3.0 Vdc
4.0 Vdc
15.0 Vdc
90.0 Vrms
18.0 Vrms
Min. Turn-Off Voltage
1.0 Vdc
1.0 Vdc
1.0 Vdc
10.0 Vrms
2.0 Vrms
Nominal Input Impedance
300 Ohm
240 Ohm
1500 Ohm
14.1k Ohm
4.2k Ohm
Typical Input Current @ Nominal Voltage
15 mAdc
15 mAdc
15 mAdc
10 mArms
5 mArms
MODEL NUMBERS
GENERAL NOTES
© 2002 CRYDOM CORP, Specifications subject to change without notice.
➀ All parameters at 25˚C unless otherwise specified.
➁ Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
➂ Heatsink temperature 85ûC Maximum.
➃ Turn-On Time for Random Turn-On versions 0.1msec (DC Control Models).
FastFax Document No. 115
SERIES PF
Rev. 041902
PAGE 1 OF 2
For recommended applications and more information contact:
USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540
Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154
Email: [email protected] WEB SITE: http://www.crydom.com
UK: +44 (0)1202 365070 • FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham
Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: [email protected]
GERMANY: +49 (0)180 3000 506
Series PF, PowerFin
TM
Up to 25Amp • 120/240, 380, 480 Vac • AC Output
GENERAL SPECIFICATIONS
Dielectric Strength 50/60Hz Input/Output
4000 Vrms
109 Ohm
Insulation Resistance (Min.) @ 500 Vdc
8 pF
Max. Capacitance Input/Output
Ambient Operating Temperature Range
-30 to 80˚C
Ambient Storage Temperature Range
-30 to 125˚C
M ECHANICAL SPECIFICATIONS
Weight: (typical)
.85 oz. (25g)
Encapsulation:
Thermally Conductive Epoxy
1.6 TYP.
(38.1)
AVAILABLE OPTIONS
R
Random Turn-On (AC & DC Control, 240V Only)
Phase Controllable (DC Control, 240V Only)
Example: PF240A25 R, PFE240D25 R
1.35
MAX.
(34.3)
.050
(1.3)
4
3
2
.300
(7.6) TYP.
1
.72
(18.3) TYP.
.200
(5.1)
.700
(17.8)
1.100
(27.9)
1.70
(43.1)
.900
(22.8)
DC CONTROL
PIN 1: AC LOAD
PIN 2: AC LOAD
PIN 3: +DC CONTROL
PIN 4: -DC CONTROL
.040
(1.0)
DIA.
4 PLACES
All dimensions are in inches (millimeters)
AC CONTROL
PIN 1: AC LOAD
PIN 2: AC LOAD
PIN 3: AC CONTROL
PIN 4: AC CONTROL
10
LOAD CURRENT (AMPS)
LOAD CURRENT (AMPS)
CURRENT DERATING CURVES
8
6
4
2
0
0
10
20
30
40
50
60
70
AMBIENT TEMPERATURE (˚Cû)
F ig .1 C onvection C ooling
APPROVALS
UL
E116950
VDE 70938 (DC Control Only)
FastFax Document No. 115
SERIES PF
Rev. 041902
PAGE 2 OF 2
80
25
20
15
10
5
0
0
20
40
60
80
100
120
140
HEATSINK TEMPERATURE (˚Cû)
F ig .2 F orced A ir C ooling
©2002 CRYDOM CORP, Specifications subject to change without notice.
For recommended applications and more information contact:
USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540
Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154
Email: [email protected] WEB SITE: http://www.crydom.com
UK: +44 (0)1202 365070 • FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham
Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: [email protected]
GERMANY: +49 (0)180 3000 506