Surface Mount Specialty Polymer Solid Aluminum Electrolytic Capacitors NSPX Series FEATURES • HIGH VOLTAGE MULTILAYER SOLID POLYMER ALUMINUM CAPACITOR • LOW PROFILE (1.1MM ~ 1.9MM HEIGHT), RESIN PACKAGE RoHS • HIGH RIPPLE CURRENT AND SURGE VOLTAGE CAPABILITIES Compliant • FITS EIA (7343) “D” AND “E” TANTALUM CHIP LAND PATTERNS includes all homogeneous materials • Pb-FREE AND COMPATIBLE WITH REFLOW SOLDERING *See Part Number System for Details CHARACTERISTICS Rated Working Range Rated Capacitance Range Operating Temperature Range Capacitance Tolerance Max. Leakage Current (µA) After 2 Minutes (+20°C) 10 ~ 35VDC 10 ~ 100µF -55 ~ +105°C ± 20% (M) < 0.3CV Max. Tan δ, 120Hz, +20°C 0.06 Capacitance Change Tan δ Leakage Current Capacitance Change Tan δ Leakage Current High Temperature Load Life 2,000 Hours @ 105°C at Rated Working Voltage Damp Heat Test 500 Hours @ +60°C at 90% RH without load Within ±20% of initial measured value Less than 200% specified max. value Less than specified max. value Within -20%/+60% of initial measured value Less than 200% of specified max. value < 0.9CV STANDARD PRODUCTS AND SPECIFICATIONS NIC Part Number NSPX470M10D5ATRF NSPX470M10D6ATRF NSPX680M10D1ATRF NSPX680M10D6ATRF NSPX101M10D6ATRF NSPX150M16D5ATRF NSPX150M16D6ATRF NSPX220M16D5ATRF NSPX220M16D6ATRF NSPX330M16D5ATRF NSPX330M16D6ATRF NSPX470M16D1ATRF NSPX470M16D6ATRF NSPX680M16D6ATRF NSPX100M20D5ATRF NSPX150M20D5ATRF NSPX220M20D5ATRF NSPX220M20D6ATRF NSPX330M20D1ATRF NSPX330M20D6ATRF NSPX470M20D1ATRF NSPX470M20D6ATRF NSPX560M20D6ATRF NSPX100M25D5ATRF NSPX150M25D5ATRF NSPX150M25D6ATRF NSPX220M25D1ATRF NSPX220M25D6ATRF NSPX330M25D6ATRF NSPX100M35D5ATRF NSPX150M35D1ATRF NSPX150M35D6ATRF NSPX220M35D6ATRF WV SV Cap. (Vdc) (µF) 10 12.5 47 10 12.5 47 10 12.5 68 10 12.5 68 10 12.5 100 16 20 15 16 20 15 16 20 22 16 20 22 16 20 33 16 20 33 16 20 47 16 20 47 16 20 68 20 23 10 20 23 15 20 23 22 20 23 22 20 23 33 20 23 33 20 23 47 20 23 47 20 23 56 25 29 10 25 29 15 25 29 15 25 29 22 25 29 22 25 29 33 35 40 10 35 40 15 35 40 15 35 40 22 Max. LC (µA) 141.0 141.0 204.0 204.0 300.0 72.0 72.0 105.6 105.6 158.4 158.4 225.6 225.6 326.4 60.0 90.0 132.0 132.0 198.0 198.0 282.0 282.0 336.0 75.0 112.5 112.5 165.0 165.0 247.5 105.0 157.5 157.5 231.0 RIPPLE CURRENT TEMPERATURE CORRECTION FACTORS Correction Factor All Values 1 < 45°C 1.0 Tan δ 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 45°C < T < 85°C 0.80 NIC COMPONENTS CORP. www.niccomp.com Max. Ripple Current Max. ESR +45°C & 100KHz (mArms) +20°C & 100KHz (Ω) 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 3200 0.04 Height H 1.1±0.1 1.9±0.1 1.4±0.1 1.9±0.1 1.9±0.1 1.1±0.1 1.9±0.1 1.1±0.1 1.9±0.1 1.1±0.1 1.9±0.1 1.4±0.1 1.9±0.1 1.9±0.1 1.1±0.1 1.1±0.1 1.1±0.1 1.9±0.1 1.4±0.1 1.9±0.1 1.4±0.1 1.9±0.1 1.9±0.1 1.1±0.1 1.1±0.1 1.9±0.1 1.4±0.1 1.9±0.1 1.9±0.1 1.1±0.1 1.4±0.1 1.9±0.1 1.9±0.1 85°< T < 105°C 0.50 www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Specialty Polymer Solid Aluminum Electrolytic Capacitors PART NUMBERING SYSTEM NSPX 330 M 25 D6 A TR F Series RoHS Compliant Tape and Reel Peak Reflow Temperature Code (A = +260°C) Case Size Working Voltage Tolerance Code M=20% Capacitance Code in μF, first 2 digits are significant, third digits no. of zeros RECOMMENDED REFLOW SOLDERING PROFILE DURATION ABOVE 230°C (FOR 260°C REFLOW PARTS) Maximum Time Above +230°C is 40 seconds 50 seconds 60 seconds 10 Seconds Max. COMPONENT SURFACE TEMP. (oC) If Peak Soldering Temperature is 260°C 255°C 250°C NSPX Series Notes: 1. SAC alloy (+217°C) reflow soldering compatible 2. Soldering heat limits apply to the top surface of component 3. If you have concerns about your reflow soldering profile review them with NIC to insure compatible [[email protected]] 4. Two passes through the reflow process are allowed (cooling down period between process in 5 days max.). 260oC Max. 250 230 200 150 150oC ~ 200°C PREHEAT Time above 230°C 100 NATURAL COOLING 120 Seconds 50 Time (Seconds) DIMENSIONS (mm) Case Code D1, D5 & D6 L ± 0.2 7.3 W ± 0.2 4.3 H W1 ± 0.1 see values table 2.4 VOLTAGE CODES S ± 0.3 1.3 Voltage 10Vdc 16Vdc 20Vdc 25Vdc 35Vdc W1 S L Date Code Code A C D E V PART MARKING Capacitance (μF) H 10 W 64721 RECOMMENDED LAND PATTERNS (mm) Case Code D1, D5 & D6 A 2.4 B 2.8 C 4.0 E Voltage Code Anode Polarity Indicator TERMINATION MATERIAL: B D1, D5 and D6 Case Sizes Base: Fe (~ 100µm) Under Plating: Cu (~ 5µm) Finish Plating: Sn (5 ~ 9µm) C A A Please note the NSP series will fit on standard “D” and “E” size (7343) tantalum chip capacitor land patterns PRECAUTIONS Please review the notes on correct use, safety and precautions found on our website at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Specialty Polymer Solid Aluminum Electrolytic Capacitors NSPX Series CARRIER Tape Dimensions (mm) Case Code D1 D5 D6 A±0.2 B±0.2 7.6 4.5 Dφ 1.5 +0.1 E±0.1 F±0.1 Po±0.1 P1±0.1 t±0.2 W±0.3 5.50 1.75 4.0 8.0 T±1.0 20.0 t 3.0 2.4 1.5 2.4 12.0 Reel Dimensions (mm) A±2.0 f330 B ±1.0 f80 C±0.5 f13.0 D±0.8 f21.0 E±0.5 2.0 W±1.0 14 T E C D R:1.0 A 3 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com B Case Reel Code Quantity D1, D5 & D6, 3,500 W t www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com