Memory Back-Up Capacitors NEXT Series FEATURES • SMALLER THAN NEXA SERIES • DOUBLE LAYER CONSTRUCTION • SHORT TERM POWER SOURCE (UP TO 50mA) • SUITABLE FOR FLOW SOLDERING • LEAD-FREE FINISH CHARACTERISTICS Rated Voltage Range Rated Capacitance Range 5.5VDC 0.1F ~ 5.6F (100,000μF ~ 5,600,000μF) Operating Temp. Range Capacitance Tolerance -40°C ~ +85°C +80%/-20% (Z) Δ Capacitance Change Load Life Test @ 85°C 1,000 hours Super Capacitor Application Guide Maximum ESR Less than ±30% of initial measured value Less than 200% of the specified maximum value Less than 200% of the specified maximum value Within +80%/-20% of specified value Less than specified maximum value Less than specified maximum value Less than ±20% of initial measured value Less than 120% of the specified maximum value Current at 30 minutes Less than 120% of the specified maximum value Maximum ESR Current at 30 minutes Δ Capacitance Change Temperature Cycling (5 cycles, -40 ~ +85°C Maximum ESR Current at 30 minutes Δ Capacitance Change Humidity Resistance (240 hours @ 40°C/90% RH) STANDARD VALUES AND SPECIFICATIONS NIC P/N Capacitance Value (F) Charge Discharge Rated Voltage (VDC) Max. Current @ 30 minutes (mA) Max. ESR @ 1KHz (Ω) Typical DCR (Ω) NEXT104Z5.5V11.5X8.5F 0.10 0.14 5.5 < 0.15 <16 23 NEXT224Z5.5V14.5X12F 0.22 0.28 5.5 <0.33 <10 16 NEXT474Z5.5V16.5X13F 0.47 0.60 5.5 <0.71 <6.5 5.4 NEXT105Z5.5V21.5X13F 1.0 1.3 5.5 <1.5 <3.5 2.9 NEXT225Z5.5V28.5X14F 2.2 2.8 5.5 <3.3 <1.8 2.1 NEXT335Z5.5V36.5X15F 3.3 4.2 5.5 <5.0 <1.0 1.3 NEXT565Z5.5V44.5X17F 5.6 7.2 5.5 <8.4 <0.6 0.8 D ±0.5 CASE DIMENSIONS (mm) NIC P/N DIMENSIONS (mm) D H S LL d1 d2 NEXT104Z5.5V11.5X8.5F 11.5 8.5 5.08 4.1 ± 1.0 0.4 1.2 NEXT224Z5.5V14.5X12F 14.5 12.0 5.08 3.4 ± 1.0 0.4 1.2 NEXT474Z5.5V16.5X13F 16.5 13.0 5.08 5.1 ± 1.0 0.4 1.2 NEXT105Z5.5V21.5X13F 21.5 13.0 7.62 4.5 ± 1.5 0.6 1.2 NEXT225Z5.5V28.5X14F 28.5 14.0 10.16 8.0 ± 1.5 0.6 1.4 NEXT335Z5.5V36.5X15F 36.5 15.0 15.0 8.7 ± 2.0 0.6 1.7 NEXT565Z5.5V44.5X17F 44.5 17.0 20.0 7.5 ± 2.0 1.0 1.4 H max. LL - S ±0.5 - + + 0.3mm min. TERMINATION FINISH: Pb-FREE (99%Sn/1%Cu) d2 ±0.1 d1 ±0.1 PRECAUTIONS WASHING is NOT RECOMMENDED. Additional guidelines and precautions can be found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 1