Surface Mount Aluminum Electrolytic Capacitors FEATURES • • • • • • SAC Alloy Compatible 260°C CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING REDUCED SIZE AVAILABLE WITH ANTI-VIBRATION TERMINATIONS (8 & 10mm DIAMETER) SUIT FOR HIGH TEMPERATURE REFLOW SOLDERING (UP TO 260°C) 2,000 HOUR LOAD LIFE @ +105°C DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING • MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage Rating Rated Capacitance Range Operating Temp. Range Capacitance Tolerance Max. Leakage Current After 2 Miuntes @ 20°C 6.3 ~ 50Vdc 10 ~ 2,200μF -55 ~ +105°C ±20% (M) 0.01CV or 3μA whichever is greater W.V. (Vdc) S.V. (Vdc) Tan δ @ 120Hz/20°C W.V. (Vdc) Z-25°C/Z+20°C Z-40°C/Z+20°C Z-55°C/Z+20°C Capacitance Change Tan δ Leakage Current Tan δ @ 120Hz/20°C Low Temperature Stability Impedance Ratio @ 120Hz Load Life Test @ 105°C All Case Sizes = 2,000 hours Code 10 100 22 33 47 68 100 150 220 330 470 560 680 820 1000 1500 2200 220 330 470 680 101 151 221 331 471 561 681 821 102 152 222 6.3 - - - includes all homogeneous materials *See Part Number System for Details 10 16 25 35 50 13 20 32 44 63 0.19 0.16 0.14 0.12 0.10 10 16 25 35 50 2 2 2 2 2 3 3 3 3 3 4 4 3 3 3 Within ±30% of initial measured value Less than ±200% of the specified maximum value Less than the specified maximum value PART NUMBER SYSTEM Working Voltage (Vdc) 10 16 25 35 - RoHS Compliant 6.3 8.0 0.26 6.3 2 3 4 STANDARD VALUES AND CASE SIZES (mm) Cap. (µF) NAZH Series - 4x6.1 4x6.1 4x6.1 5x6.1 4x6.1 5x6.1 5x6.1 4x6.1 5x6.1 5x6.1 6.3x6.1 4x6.1 5x6.1 6.3x6.1 6.3x6.1 5x6.1 6.3x6.1 6.3x8 6.3x8 5x6.1 6.3x6.1 6.3x6.1 6.3x8 6.3x6.1 6.3x8 6.3x8 8x10.5 6.3x8 6.3x8 8x10.5 10x10.5 6.3x8 8x10.5 10x10.5 8x10.5 10x10.5 8x10.5 10x10.5 10x10.5 - 50 4x6.1 5x6.1 5x6.1 6.3x6.1 6.3x8 8x10.5 10x10.5 - NAZH 681 M 16V 8x10.5 N LB W Y F Optional Wide Terminations* Termination/Packaging Code Reflow Temperature Code Size in mm Working Voltage Tolerance Code M=20% Capacitance Code in µF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10µF Series *Wide terminations available on 8mm & 10mm diameter parts. See page 4 for details. Optional: Suitable for automotive equipment, sourced to special production and inspection at TS-16949 certified production site TERMINATION FINISH & PEAK REFLOW TEMPERATURE CODES PACKAGING OPTIONS CODES Code B LB Peak Reflow Temperature 260°C Code N COMPONENT DIMENSIONS (mm) + Dφ Case Size φD±0.5 L max. A±0.2 B±0.2 I±0.3 W P±0.3 4x6.1 4.0 6.1 4.3 4.3 1.8 0.5~0.8 1.0 5x6.1 5.0 6.1 5.3 5.3 2.2 0.5~0.8 1.5 6.3x6.1 6.3 6.1 6.6 6.6 2.6 0.5~0.8 1.8 6.3x8 6.3 8 6.6 6.6 2.6 0.5~0.8 1.8 8x10.5* 8.0 10.5 8.3 8.3 3.4 0.7~1.1 3.1 10x10.5* 10.0 10.5 10.3 10.3 3.5 0.7~1.4 4.6 *See page 3 wide termination component dimensions. RoHS Compliant Finish & Reel Size Sn-Bi Finish & 13" Reel Sn-Bi Finish & 15" Reel I I - W A L 0.3mm max. Note: L does not include termination deflection P B Polarity Marking Production Code PRECAUTIONS Please review the notes on correct use, safety and precautions found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] Capacitance t Series Voltage Rating 1 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Aluminum Electrolytic Capacitors NAZH Series STANDARD VALUES, CASE SIZES AND SPECIFICATIONS NIC Part Number NAZH101M6.3V4X6.1NBF NAZH221M6.3V5X6.1NBF NAZH331M6.3V6.3X6.1NBF NAZH471M6.3V6.3X8NBF NAZH681M6.3V6.3X8NBF NAZH152M6.3V8X10.5NBF NAZH222M6.3V10X10.5NBF NAZH680M10V4X6.1NBF NAZH151M10V5X6.1NBF NAZH221M10V6.3X6.1NBF NAZH331M10V6.3X8NBF NAZH471M10V6.3X8NBF NAZH102M10V8X10.5NBF NAZH152M10V10X10.5NBF NAZH470M16V4X6.1NBF NAZH680M16V5X6.1NBF NAZH101M16V5X6.1NBF NAZH151M16V6.3X6.1NBF NAZH221M16V6.3X6.1NBF NAZH331M16V6.3X8NBF NAZH681M16V8X10.5NBF NAZH102M16V10X10.5NBF NAZH220M25V4X6.1NBF NAZH330M25V4X6.1NBF NAZH470M25V5X6.1NBF NAZH680M25V5X6.1NBF NAZH101M25V6.3X6.1NBF NAZH151M25V6.3X8NBF NAZH221M25V6.3X8NBF NAZH471M25V8X10.5NLBF NAZH821M25V10X10.5NLBF NAZH220M35V4X6.1NBF NAZH330M35V5X6.1NBF NAZH470M35V5X6.1NBF NAZH680M35V6.3X6.1NBF NAZH101M35V6.3X6.1NBF NAZH151M35V6.3X8NBF NAZH331M35V8X10.5NLBF NAZH561M35V10X10.5NLBF NAZH100M50V4X6.1NBF NAZH100M50V5X6.1NBF NAZH220M50V5X6.1NBF NAZH470M50V6.3X6.1NBF NAZH101M50V6.3X8NBF NAZH221M50V8X10.5NBF NAZH331M50V10X10.5NBF Cap. (μF) 100 220 330 470 680 1500 2200 68 150 220 330 470 1000 1500 47 68 100 150 220 330 680 1000 22 33 47 68 100 150 220 470 820 22 33 47 68 100 150 330 560 10 10 22 47 100 220 330 W.V. (Vdc) 6.3 10 16 25 35 50 Dissipaton Factor (Tan δ) 0.26 0.26 0.26 0.26 0.26 0.26 0.28 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.1 0.1 0.1 0.1 0.1 0.1 0.1 Max. ESR (W) +20°C/100KHz 0.85 0.36 0.26 0.16 0.16 0.08 0.06 0.85 0.36 0.26 0.16 0.16 0.08 0.06 0.85 0.36 0.36 0.26 0.26 0.16 0.08 0.06 0.85 0.85 0.36 0.36 0.26 0.16 0.16 0.08 0.06 0.85 0.36 0.36 0.26 0.26 0.16 0.08 0.06 2.3 0.88 0.88 0.68 0.34 0.18 0.12 Max. Ripple Current (mA) +105°C/100KHz 160 240 300 600 600 850 1190 160 240 300 600 600 850 1190 160 240 240 300 300 600 850 1190 160 160 240 240 300 600 600 850 1190 160 240 240 300 300 600 850 1190 85 165 165 195 350 670 900 Load Life Hours @ +105°C 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 RIPPLE CURRENT FREQUENCY CORRECTION FACTORS Frequency 10 ~ 470μF 560 ~ 2200μF 2 120Hz 0.65 0.70 1KHz 0.85 0.90 10KHz 0.95 0.95 NIC COMPONENTS CORP. www.niccomp.com 100KHz~ 1.00 1.00 www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Aluminum Electrolytic Capacitors Case Size 4x6.1 5x6.1 6x3x6.1 6.3x8 8x10.5 10x10.5 a 1.0 1.5 1.8 1.8 2.8 4.3 b 2.5 2.8 3.2 3.2 4.1 4.4 c 1.6 1.6 1.6 1.6 2.1 2.5 Temperature - Deg. C RECOMMENDED LAND PATTERN DIMENSIONS (mm) a c b NAZH Series Peak Temperature (see table) 230 Time Above 230°C (see table) Time Above 217°C (see table) 200 Time Above 200°C (see table) 150 100 Preheat - 120 seconds max. (160°C) 50 Time (Seconds) WIDE TERMINATION (WT) DIM. (mm) Case Size 8x10.5 10x10.5 Dφ ± 0.5 8.0 10.0 L max. 11.2 11.2 A, B ± 0.2 8.3 10.3 C max. 10.0 12.0 P ref. (3.1) (4.6) W 0.7 ~ 1.4 1.0 ~ 1.4 R ± 0.2 0.7 0.7 C T ± 0.2 1.3 1.3 Dφ W A WT Anti-Vibration Skirt L T Note: L does not include termination deflection R R P Termination deflection: WT = 0.15mm max. from bottom of support terminals B a WT LAND PATTERN DIM. (mm) Case Size 8x10.5 10x10.5 a 2.5 3.8 b 4.5 4.8 c 4.7 4.7 c b b Review & Compare Reflow Soldering Heat Limits V-chip SMT Aluminum Electrolytic Capacitors www.niccomp.com/RSL 3 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Aluminum Electrolytic Capacitors NAZH Series PEAK REFLOW TEMPERATURE AND DURATION Diameter Peak Temperature Duration Time > 250°C, 5 sec. 260°C 255°C Time > 250°C, 10 sec. 260°C Time > 250°C, 5 sec. 8 ~ 10mm φ 245°C Time > 240°C, 10 sec. *Second reflow shall be at least one hour after natural cool to room temperature. Time > 230°C Time > 217°C Time > 200°C 30 sec. 40 sec. 70 sec. 4 ~ 6.3mm φ Number of Reflow Passes* 2 1 2 RESISTANCE TO SOLDERING HEAT After reflow soldering the capacitor shall be stablized at room temperature prior to measuring. Capacitance Change Within ±10% of initial measured value Tan d Less than specified maximum value Leakage Current Less than specified maximum value Appearance No significant change can be observed Resistance to Soldering Heat CARRIER TAPE DIMENSIONS Case Size A ±0.2 4x6.1 4.7 5x6.1 6.3x6.1 6.3x8 8x10.5 10x10.5 5.7 7.0 7.0 8.7 10.7 B +0.3/-0.2 4.6 +0.2 /-0.1 5.7 7.0 7.0 8.7 10.7 C ±0.3 D ±0.1 P ±0.1 T ±0.2 12.0 5.5 8.0 6.2 12.0 16.0 16.0 24.0 24.0 5.5 7.5 7.5 11.5 11.5 12.0 12.0 12.0 16.0 16.0 6.4 6.4 8.4 11.1 11.2 t ±0.1 0.6 1. Leader and trailer will have a minimum of 10 empty pockets and 20cm of extended cover tape. 2. A maximum of 3 connections (splices) per reel. 1.5φ+0.1/-0 1.75 + 0.10 t C B D 4 + 0.1 A P Feeding T REEL DIMENSIONS & REEL QTY Case Size W ±1.0 4x6.1 5x6.1 6.3x6.1 6.3x8 8x10.5 10x10.5 14 14 18 18 26 26 Reel Quantity TR 13" (330mm) TR 15" (380mm) 1,200 800 800 500 300 500 300 500 330mm or 380mm 21±0.8 2.0±0.5 50∅ Min. 13∅ ±0.5 3.0 ± 0.5 W 4 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com