Multilayer Ceramic Chip Capacitors FEATURES • HIGH VOLTAGE 200Vdc ~ 5KVdc • NPO AND X7R DIELECTRICS • CASE SIZES FROM 0603 ~ 2225 • NICKEL BARRIER TERMINATION AND EXCELLENT MECHANICAL STRENGTH SPECIFICATIONS Operating Temperature Range Temperature Characteristic Dissipation Factor Insulation Resistance Capacitance Range Capacitance Tolerance Rated Voltage Dielectric Withstanding Voltage Test Conditions (C & DF) NMC-H Series RoHS Compliant Includes all homogeneous materials *See Part Number System for Details NPO X7R -55°C ~ +125°C -55°C ~ +125°C ±30ppm ±15% < 0.1% < 2.5% > 500MegΩ or 500MegΩ-µF whichever is less Test Method: Voltage rating < 500V measured after 1 minute at rated voltage, Voltage rating > 500V measured after 1 minute at 500V 2.0pF ~ 0.039µF 150pF ~ 0.68µF ±0.1pF(B), ±0.25pF(C), ±0.5pF(D) ±5%(J), ±10%(K), ±20(M) ±1%(F), ±2%(G), ±5%(J), ±10%(K), ±20(M) 200Vdc ~ 5KVdc 200Vdc ~ 3KVdc Working Voltage 200 & 250Vdc x 1.5 + 100Vdc for 5 seconds Working Voltage 500Vdc x 1.5 for 5 seconds Working Voltage greater than 500Vdc x 1.2 for 5 seconds C < 1000pF = 1MHz, 1Vrms @ 25°C 1KHz, 1Vrms @ 25°C C < 1000pF = 1KHz, 1Vrms @ 25°C PART NUMBER SYSTEM NMC-H 1206 NPO 102 J 1KV TRP or TRPLP 2K F RoHS compliant Non-Std or Optional Reel Quantity Series Tape & Reel (Embossed Plastic Carrier) Tape & Reel (Punched carrier) Voltage (Vdc) Capacitance Tolerance Code (see chart) Capacitance Code, expressed in pF, first 2 digits are significant, 3rd digit is no. of zeros, “R” indicates decimal for under 10pF Temperature Characteristic Size Code (see chart) CONSTRUCTION W T P P L 100% Sn over Ni barrier ® 1 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors NMC-H NPO Series NPO-HIGH VOLTAGE SIZE CHART (mm) EIA Case Size 0603 Length (L) 1.6 ± 0.10 Width (W) 0.80 ± 0.10 Thickness (T) 0.90 max. Termination Width (P) 0.25 ~ 0.65 Capacitance 200 0805 2.0 ± 0.15 1.25 ± 0.10 1.45 max. 0.25 ~ 0.75 250 500 200 1206 3.2 ± 0.15 1.6 ± 0.20 1.80 max. 0.25 ~ 0.80 Working Voltage (Vdc) 250 500 1K 1210 3.2 ± 0.30 2.5 ± 0.20 2.60 max. 0.25 ~ 1.00 2K 3K 200 250 500 2.0pF ~ 8.2pF 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 0.001µF 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0068 0.0082 ® 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors NMC-H NPO Series NPO-HIGH VOLTAGE SIZE CHART (mm) EIA Case Size Length (L) Width (W) Thickness (T) Termination Width (P) Capacitance 1808 4.6 ± 0.40 2.0 ± 0.30 2.20 max. 0.25 ~ 0.75 1K 2K 3K 1812 1825 4.6 ± 0.30 4.6 ± 0.30 3.2 ± 0.30 6.35 ± 0.40 3.00 max. 3.00 max. 0.25 ~ 0.75 0.3 ~ 1.05 Working Voltage (Vdc) 1K 2K 3K 250 500 1K 2220 5.7 ±0.40 5.00 ± 0.40 3.00 max. 0.30 ~ 1.10 2225 5.70 ± 0,40 6.35 ± 0.40 3.00 max. 0.30 ~ 1.10 5K 250 500 1K 2.0pF ~ 8.2pF 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 0.001µF 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01µF 0.012 0.015 0.018 0.022 0.027 0.033 0.039 ® 3 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors NMC-H X7R Series X7R-HIGH VOLTAGE SIZE CHART (mm) EIA Case Size Length (L) Width (W) Thickness (T) Termination Width (P) Capacitance 0805 2.0 ± 0.1 1.25 ± 0.1 1.45 max. 0.25 ~ 0.75 200 250 500 630 250 1206 3.2 ± 0.15 1.6 ± 0.15 1.80 max. 0.25 ~ 0.75 Working Voltage (Vdc) 500 630 1K 2K 1210 3.2 ± 0.2 2.5 ± 0.2 2.20 max. 0.25 ~ 0.75 200 250 500 630 1K 150 180 220 270 330 390 470 560 680 820 0.001µF 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01µF 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1µF 0.12 0.15 0.18 0.22 0.27 0.33 0.47 ® 4 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors NMC-H X7R Series X7R-HIGH VOLTAGE SIZE CHART (mm) EIA Case Size Length (L) Width (W) Thickness (T) Termination Width (P) Capacitance 1808 4.6 ± 0.4 2.0 ± 0.3 2.20 max. 0.30 min. 500 1K 2K 3K 1812 2220 4.6 ± 0.4 5.7 ±0.40 3.2 ± 0.3 5.00 ± 0.40 2.20 max. 3.00 max. 0.30 min. 0.30 ~ 1.10 Working Voltage (Vdc) 200 250 500 1K 2K 3K 250 500 630 1K 2225 5.70 ± 0,40 6.35 ± 0.40 3.00 max. 0.30 ~ 1.10 2K 250 500 1K 150 180 220 270 330 390 470 560 680 820 0.001µF 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01µF 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1µF 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0µF 1.5 2.2 ® 5 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors REEL Taping Specifications REEL DIMENSIONS (mm) Reel Diameter (A) 7” (178 ± 2.0) 10” (250 ± 2.0) 13” (330 ± 2.0) B D B 13 ± 0.5 C 50 min. 100 ± 1.0 100 ± 1.0 D T max. 8.4 +1.0/-0 (1812 case size 12.4 +2.0/-0) 21 ± 1.0 7 INCH REEL QUANTITIES* Size Tape Size Min. Qty Per Reel Max. Qty Per Reel C 01005 0201 0402 0603 0805 1206 1210 1808 1812 8mm 8mm 8mm 8mm 8mm 8mm 8mm 12mm 12mm 20,000 20,000 10,000 4,000 4,000 4,000 2,000 1,000 1,000 20,000 20,000 10,000 4,000 5,000 5,000 5,000 3,000 2,000 *Quantity dependent on chip thickness. Contact NIC for reel quantities on larger diameter reels. CARRIER TAPE MATERIAL T Parts with a thickness of >1mm will be taped on embossed plastic carrier. Parts with a thickness of less then 1mm will be taped on paper carrier A EMBOSSED PLASTIC CARRIER TAPE DIMENSIONS (mm) Tape Size W F 8mm 8.0 ± 0.2 3.5 ± 0.05 12mm 12 ± 0.2 5.5 ± 0.05 E P0 P2 D K max. 1.75 ± 0.10 4.0 ± 0.1 2.0 ± 0.5 1.5 +0.1-0.0 3.0 Notes: 1. Specifications are in compliance with EIA RS481-1-A “Taping of surface Mount Components for Automatic Placement” 2. Dimensions Ao (max.) equals component width dimension plus 0.5mm 3. Dimension Bo (max.) equals component length dimension plus 0.5mm T max. P 2.0 4.0 ± 0.1 4.5 8.0 ± 0.1 EMBOSSED PLASTIC CARRIER TAPE D Po T E P2 F Bo W Ao P K See notes 2 & 3 regarding dimensions Ao and Bo PUNCHED CARRIER TAPE DIMENSIONS (mm) Type Ao Bo 01005 0.25 ± 0.04 0.45 ± 0.04 0201 0.37 ± 0.03 0.67 ± 0.05 0402 0.65 ± 0.05 1.15 ± 0.05 0603 1.1 ± 0.2 1.9 ± 0.2 0805 1.65 ± 0.2 2.4 ± 0.2 1206 2.0 ± 0.2 3.6 ± 0.2 W F E P1 P0 D0 4.0 ± 0.1 1.5 +0.1/-0.0 2.0 ± 0.05 8.0 ± 0.3 3.5 ± 0.05 1.75 ± 0.1 4.0 ± 0.10 T1 max. 0.27 0.45 T2 max. 0.36 0.80 1.1 1.4 Mounting Hole Angular Punch Hole PUNCHED CARRIER TAPE D Po t1 E F Bo ® 6 NIC COMPONENTS CORP. t2 www.niccomp.com Ao W P1 Component Pitch www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com