Thin Film Chip Resistors NTR Series FEATURES • PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT • EIA STANDARD CASE SIZES (0201 ~ 2512) • LOW NOISE, THIN FILM (NiCr) CONSTRUCTION • REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Max.*1 Max.*2 EIA PowerRating Working Type Size Overload at 70°C Voltage Voltage NTR02 0201 1/32 (0.032)W NTR04 0402 1/16 (0.063)W NTR06 0603 1/16 (0.063)W NTR10 0805 1/10 (0.10) W NTR12 1206 1/8 (0.125) W NTR20 1210 1/5 (0.20) W 15V 25V 50V 100V 150V 150V includes all homogeneous materials *See Part Number System for Details Resistance Tolerance (Code) Temperature Coefficient (ppm/°C) Resistance Range (Ω) ±0.5% (D), ±1.0% (F) ±0.5% (D), ±1.0% (F) ±0.01% (T), ±0.05% (A), ±0.1% (B), ±0.25 (C), ±0.5% (D), ±1% (F) ± 25 (C) ± 50 (D) ±5 (S) ±10 (B) 49.9 ~ 4.99KΩ 49.9 ~ 33KΩ 49.9 ~ 4.99KΩ 49.9 ~ 12KΩ ±0.01% (T), ±0.05% (A) ±15 (N) 49.9 ~ 12KΩ ±0.1% (B), 0.25 (C), ±0.5% (D), ±1% (F) ±15 (N) 49.9 ~ 69.8KΩ ±0.05% (A) ±25(C), ±50(D) 49.9 ~ 12KΩ ±0.1% (B), ±0.25% (C), ±0.5% (D), ±1% (F) ±25 (C) 10 ~ 255KΩ ±0.1% (B), ±0.25% (C) ±50 (D) 10 ~ 255KΩ ±0.5% (D), ±1% (F) ±0.01% (T), ±0.05% (A), ±0.1% (B), ±0.25 (C), ±0.5% (D), ±1% (F) ±0.01% (T) ±0.05% (A), ±0.1% (B), ±0.25 (C), ±0.5% (D), ±1% (F) ±0.05% (A) ±0.1% (B) ±0.25 (C), ±0.5 (D), ±1% (F) ±0.25 (C), ±0.5 (D), ±1% (F) ±0.01% (T), ±0.05% (A), ±0.1% (B), ±0.25 (C), ±0.5% (D), ±1% (F) ±0.01% (T) ±0.05% (A), ±0.1% (B), ±0.25 (C), ±0.5% (D), ±1% (F) ±0.05 (A) ±0.1% (B) ±0.25 (C), ±0.5 (D), ±1% (F) ±0.01% (T), ±0.05% (A), ±0.1% (B), ±0.25 (C), ±0.5% (D), ±1% (F) ±0.01% (T) ±0.05% (A), ±0.1% (B), ±0.25 (C), ±0.5% (D), ±1% (F) ±0.05% (A) ±0.1% (B) ±50 (D) 1.0 ~ 255KΩ ±5 (S) 24.9 ~ 15KΩ ±25(C), ±50(D) 4.7 ~ 1MΩ ±25(C), ±50(D) 4.7 ~ 2.49MΩ ±0.25% (C), ±0.5% (D), ±1% (F) ±25(C), ±50(D) 1.0 ~ 2.49MΩ 30V 50V RoHS Compliant 100V 200V 300V ±0.01% (T), ±0.05% (A), ±0.1% (B), ±0.25 (C), ±0.5% (D), ±1% (F) ±0.01% (T) ±0.05% (A), ±0.1% (B), 300V ±0.25 (C), ±0.5% (D), ±1% (F) ±0.05% (A) ±0.1% (B) ±0.25% (C), ±0.5% (D), ±1% (F) For 2010 and 2512 case sizes see page 2 Note *1 - Maximum allowable continuous Working Voltage for all resistors is the lower of the two values: “Maximum Working Voltage” as specified above or 1 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com ±10(B), ±15(N) 24.9 ~ 100KΩ ±10(B), ±15(N) 4.7 ~ 332KΩ ±25(C), ±50(D) ±25(C), ±50(D) ±25(C) ±50(D) 4.7 ~ 332KΩ 4.7 ~ 1MΩ 2.0 ~ 1MΩ 1.0 ~ 1MΩ ±5 (S) ±10(B), ±15(N) ±10(B) ±15(N) ±25(C), ±50(D) ±25(C), ±50(D) ±25(C), ±50(D) ±5 (S) E-24, E-96 & E-192 24.9 ~ 200KΩ 4.7 ~ 511KΩ 4.7 ~ 1MΩ 4.7 ~ 511KΩ 4.7 ~ 2MΩ 1.0 ~ 2MΩ 24.9 ~ 30KΩ 24.9 ~49.9KΩ ±10(B), ±15(N) 24.9 ~ 499KΩ ±10(B), ±15(N) ±5 (S) 4.7 ~ 1MΩ 24.9 ~49.9KΩ ±10(B), ±15(N) 24.9 ~ 499KΩ ±10(B), ±15(N) 4.7 ~ 1MΩ ±25, ±50 4.7 ~ 1MΩ ±25(C), ±50(D) 4.7 ~ 2.49MΩ ±25(C), ±50(D) 1.0 ~ 2.49MΩ Note *2 - Maximum Overload Voltage for all resistors is the lower of the two values: "Maximum Overload Voltage” as specified above or 2x Power rating (Watts) x Resistance (Ohms) Resistance Values Power rating (Watts) x Resistance (Ohms) www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Thin Film Chip Resistors Max.*1 Max.*2 EIA PowerRating Working Type Size Overload at 70°C Voltage Voltage NTR25 2010 NTR50 2512 1/4 (0.25) W 1/2 (0.50) W 150V 150V NTR Series Resistance Tolerance (Code) ±0.01% (T), ±0.05% (A), ±0.1% (B), ±0.25 (C), ±0.5% (D), ±1% (F) ±0.01% (T) ±0.05% (A), ±0.1% (B), ±0.25 (C), ±0.5% (D), ±1% (F) ±0.05% (A) ±0.1% (B) ±0.25% (C), ±0.5% (D), ±1% (F) ±0.01% (T), ±0.05% (A), ±0.1% (B), ±0.25 (C), ±0.5% (D), ±1% (F) ±0.01% (T) ±0.05% (A), ±0.1% (B), ±0.25 (C), ±0.5% (D), ±1% (F) ±0.05% (A) ±0.1% (B) ±0.25% (C), ±0.5% (D), ±1% (F) 300V 300V 2x Power rating (Watts) x Resistance (Ohms) 100 0603 0805 1206 1~9 -95dB -95dB -95dB 10 ~ 49 -85dB -85dB -85dB 50 ~ 99 -85dB -85dB -85dB 100 ~ 4.99K -100dB -100dB -105dB 5K ~ 19.9K -100dB -100dB -100dB 20K ~ 1M -90dB -100dB -100dB Percentage of Power Rating Case Size ±5 (S) 24.9 ~ 100KΩ ±10(B), ±15(N) 24.9 ~ 499KΩ ±10(B), ±15(N) 4.7 ~ 1MΩ ±25(C), ±50(D) ±25(C), ±50(D) ±25(C), ±50(D) 4.7 ~ 1MΩ 4.7 ~ 3MΩ 1.0 ~ 3MΩ ±5 (S) ±10(B), ±15(N) 24.9 ~ 499KΩ ±10(B), ±15(N) 4.7 ~ 1MΩ ±25(C), ±50(D) ±25(C), ±50(D) ±25(C), ±50(D) 4.7 ~ 1MΩ 4.7 ~ 3MΩ 1.0 ~ 3MΩ Power rating (Watts) x Resistance (Ohms) Power Derating Curve: For operation above 70°C, power rating must be derated according to the following chart: 60 40 30 20 20 40 60 70 80 Temperature °C NIC COMPONENTS CORP. www.niccomp.com E-24, E-96 & E-192 24.9 ~ 100KΩ 80 0 2 Resistance Values resistors is the lower of the two values: "Maximum Overload Voltage” as specified above or for all resistors is the lower of the two values: “Maximum Working Voltage” as specified above or Resistance Value (Ω) Resistance Range (Ω) Note *2 - Maximum Overload Voltage for all Note *1 - Maximum allowable continuous Working Voltage TYPICAL NOISE CHARACTERISTICS Temperature Coefficient (ppm/°C) www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE 100 120 125°C 140 155 0201 All Other Sizes www.SMTmagnetics.com Thin Film Chip Resistors NTR Series ENVIRONMENTAL CHARACTERISTICS Specification Item Tol. < 0.05% Tol. > 0.05% Typical Test Method* Tol. > 0.05% 0402 0603 0805 Standard Temperature Range: -55°C ~ +155°C (power derating above +70°C) Temperature Coefficient of Resistance As specified As specified Short Time Overload ∆R ±0.05% ∆R ±0.2% -0.001% -0.002% -0.005% Dielectric Withstanding Voltage As specified Insulation Resistance >1000MΩ Thermal Shock (N/A 0201 Size) Load Life ∆R ±0.05% ∆R ±0.25% ∆R ±0.05% ∆R ±0.2% >7KΩ ∆R ±0.5% - 265V - 298V - 415V -0.02% 0.002% no change 0.02% 0.03% 0.06% Humidity (Steady State) ∆R ±0.05% ∆R ±0.3% 0.003% 0.005% 0.007% Resistance to Dry Heat ∆R ±0.05% ∆R ±0.5% 0.02% Low Temperature Operation ∆R ±0.05% ∆R ±0.2% 0.006% Bending Strength ∆R ±0.05% ∆R ±0.2% 0.001% -0.010% 0.002% (N/A 0201 Size) (N/A 0201 Size) Solderability Resistance to Soldering Heat 0.07% 95% Minimum Coverage ∆R ±0.05% ∆R ±0.2% 0.001% 0.025% 0.008% 0.001% MIL-STD-202F Method 301 Apply Max. Overload Voltage for 1 minute MIL-STD-202F Method 107G -55°C ~ +150°C, 100 cycles MIL-STD-202F Method 108A RCWV +70°C, 1.5 hours ON, 0.5 hours OFF Total time 1,000 ~ 1,048 hours MIL-STD-202F Method 103B +40°C, 90% ~ 95% RH, RCWV 1.5 hours ON, 0.5 hours OFF Total time 1,000 ~ 1,048 hours MIL-STD-202 Method 108 +125°C, 1000 hours JIS-C-502-7.1 1 hour @ -65°C followed by 45 minutes of RCWV JIS-C-5202-6.1.4 Bending Amplitude 3mm for 10 seconds MIL-STD-202F Method 208H 245°C ±5°C, 5 ±0.5 seconds >95% -0.02% RCWV x 2.5 or Max Overloading Voltage for 5 Seconds MIL-STD-202F Method 302 Apply 100Vdc for 1 minute >10GΩ 0.001% +25/-55/+25/+125/+25 0.006% MIL-STD-202F Method 210E 260°C ±5°C for 10 ±1 seconds *0201 testing per IEC 60115 - 1 3 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Thin Film Chip Resistors NTR Series STANDARD E-24, E-96 AND E-192 VALUES AND 0603 RESISTANCE CODES E-24 Value 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 E-96 Value Code 100 01 110 05 121 09 133 13 147 17 162 21 178 25 196 29 215 33 237 37 261 41 287 45 316 49 348 53 383 57 422 61 464 65 511 69 562 73 619 77 681 81 750 85 825 89 909 93 Value Code 102 02 113 06 124 10 137 14 150 18 165 22 182 26 200 30 221 34 243 38 267 42 294 46 324 50 357 54 392 58 432 62 475 66 523 70 576 74 634 78 698 82 768 86 845 90 931 94 Value Code 105 03 115 07 127 11 140 15 154 19 169 23 187 27 205 31 226 35 249 39 274 43 301 47 332 51 365 55 402 59 442 63 487 67 536 71 590 75 649 79 715 83 787 87 866 91 953 95 Value Code 107 04 118 08 130 12 143 16 158 20 174 24 191 28 210 32 232 36 255 40 280 44 309 48 340 52 374 56 412 60 453 64 499 68 549 72 604 76 665 80 732 84 806 88 887 92 976 96 * Special E192 resistance values are supported on all case sizes of NTR series. Please review your E192 value requirements with NIC, as special terms apply, and E192 values are supplied without component resistance value marking. MULTIPLIER CODE Code Multiplier 4 A B, b C D, d E 100 101 102 103 104 F 105 G 106 H 107 NIC COMPONENTS CORP. www.niccomp.com X Y Z 10-1 10-2 10-3 www.lowESR.com E-192* Value Value Value Value Value Value 100 147 215 316 464 681 101 149 218 320 470 690 102 150 221 324 475 698 104 152 223 328 481 706 105 154 226 332 487 715 106 156 229 336 493 723 107 158 232 340 499 732 109 160 234 344 505 741 110 162 237 348 511 750 111 164 240 352 517 759 113 165 243 357 523 768 114 167 246 361 530 777 115 169 249 365 536 787 117 172 252 370 542 796 118 174 255 374 549 806 120 176 258 379 556 816 121 178 261 383 562 825 123 180 264 388 569 835 124 182 267 392 576 845 126 184 271 397 583 856 127 187 274 402 590 866 129 189 270 407 597 876 130 191 280 412 604 887 132 193 284 417 612 898 133 196 287 422 619 909 135 198 291 427 626 920 137 200 294 432 634 931 138 203 298 437 642 942 140 205 301 442 649 953 142 208 305 448 657 965 143 210 309 453 665 976 145 213 312 459 673 988 www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Thin Film Chip Resistors NTR Series part marking 1. No marking on 0402 case size. 2. Marking for 0603 case size: E-24 values and E-96 values: ± 1% (F), ± 0.5% (D), ± 0.25% (C). ± 0.1% (B) tolerances E-192 values: ± 0.1% (B) tolerance (No Marking) CODING FORMULA XX X Multiplier Code Resistance Code Example:10.2kΩ = 102 x 102 Ω = 02C 02 C Marking Examples 10Ω = 01X 7.5k Ω = 85B 150k Ω = 18D 1 MegΩ = 01E 33.2 Ω = 332 x 10 = 51X 51 X -1 3. Marking for 0805, 1206, 2010 and 2512 case sizes: E-24 and E-96 values - ±1%(F), ±0.5% (D), ±0.25%(C), ±0.1% (B) tolerances E-192 values: ±0.1% (B) tolerance (No Marking) 4 DIGIT MARKING SYSTEM - First 3 digits are the significant figures, the 4th digit is the mulitplier. "R"= decimal point. Examples: 0R10 = 0.10 ohms, 1R00 = 1.0 ohms, 22R1=22.1 ohms, 3320= 332 ohms, 4751=4.75K ohms, 1132=11.3K ohms, 6493=649K ohms PART NUMBER SYSTEM NTR 10 B 1003 C TR 1K F RoHS compliant Optional 1,000 piece reel quantity Tape & Reel Packaging Temperature Coefficient Code: S = ±5ppm, B = ±10ppm, N = ±15ppm, C = ±25ppm, D = ±50ppm Resistance Code: First 3 digits are significant figures (both E-24 and E-96 values), 4th digit is the multiplier, “R” indicates a decimal point. Tolerance Code: T = 0.01%, A = 0.05%, B = ± 0.1%, C = ± 0.25%, D = ± 0.5%, F = ± 1% Size Code: 02=0201, 04=0402, 06=0603, 10=0805, 12=1206, 20=1210, 25=2010, 50=2512 Series DIMENSIONS (mm) Type NTR02 NTR04 NTR06 NTR10 NTR12 NTR20 NTR25 NTR50 5 Power Rating 1/20W 1/16W 1/16W 1/10W 1/8W 1/5W 1/4W 1/2W EIA Size 0201 0402 0603 0805 1206 1210 2010 2512 L 0.58 ± 0.05 1.00 ± 0.05 1.55 ± 0.10 2.00 ± 0.15 3.05 ± 0.10 3.05 ± 0.10 4.90 ± 0.15 6.30 ± 0.15 NIC COMPONENTS CORP. www.niccomp.com W 0.29 ± 0.05 0.50 ± 0.05 0.80 ± 0.10 1.25 ± 0.15 1.55 ± 0.10 2.60 ± 0.15 2.40 ± 0.15 3.10 ± 0.15 H 0.23 ± 0.03 0.30 ± 0.05 0.45 ± 0.10 0.55 ± 0.10 0.55 ± 0.10 0.55 ± 0.10 0.55 ± 0.10 0.55 ± 0.10 www.lowESR.com T 0.12 ± 0.05 0.20 ± 0.10 0.30 ± 0.20 0.30 ± 0.20 0.42 ± 0.20 0.50 ± 0.30 0.60 ± 0.30 0.60 ± 0.30 t 0.15 ± 0.05 0.20 ± 0.10 0.30 ± 0.20 0.40 ± 0.25 0.35 ± 0.25 0.50 ± 0.25 0.50 ± 0.25 0.50 ± 0.25 www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Thin Film Chip Resistors NTR Series Taping Specifications (1) Availability Type Power Rating EIA Size NTR02 NTR04 NTR06 NTR10 NTR12 NTR25 NTR50 1/32W 1/16W 1/16W 1/10W 1/8W 1/4W 1/2W 0201 0402 0603 0805 1206 2010 2512 Fig. A A A A A B B Carrier Tape Material Width (mm) Paper 8 Plastic Qty per Reel (pcs) Standard Optional 10,000 1,000 10,000 1,000 12 5,000 1,000 4,000 1,000 (2) Paper Tape Dimensions (mm) FIG. A Type NTR02 NTR04 NTR06 NTR10 NTR12 EIA Size A 0201 0.38 ± 0.03 0402 0.67 ± 0.03 0603 1.10 ±0.05 0805 1.60 ±0.05 1206 2.00 ±0.05 B 0.68 ± 0.03 1.15 ± 0.03 1.90 ±0.05 2.37 ±0.05 3.55 ±0.05 D E F P0 P1 2.0 ± 0.05 1.55 ±0.05 1.75 ±0.10 3.50 ±0.05 4.0 ±0.10 P2 W T 0.31 ± 0.02 0.40 ± 0.03 2.0 ±0.05 8.0 ±0.1 0.60 ± 0.03 4.0 ±0.05 0.75 ± 0.05 FIG. A P0 E D Cover tape F W B P2 A T P1 (3) Plastic embossed tape Dimensions (mm) FIG. B Type NTR25 NTR50 EIA Size 2010 2512 A 2.85 ±0.10 3.40 ±0.10 B 5.45 ±0.10 6.65 ±0.10 D E F P0 1.50 ±0.10 1.75 ±0.10 5.50 ±0.05 P1 4.0 ±0.10 P2 W T 4.0 ±0.05 2.0 ±0.05 12.0 ±0.1 0.85 ±0.10 FIG. B P0 E D Cover tape F W B T P2 A P1 6 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Thin Film Chip Resistors NTR Series REEL DIMENSIONS (mm) 21 0. 8 13∅ ±0.5 ± 60∅ ±2 2 ± .0 0. 5 W2 LAND PATTERN DIMENSIONS (mm) Type NTR02 NTR04 NTR06 NTR10 NTR12 NTR25 NTR50 EIA Size 0201 0402 0603 0805 1206 2010 2512 A 0.28 0.50 0.80 1.00 2.00 3.60 4.90 B 0.20 0.50 0.70 1.00 1.15 1.40 1.60 C 0.34 0.60 ± 0.2 0.90 ± 0.2 1.35 ± 0.2 1.70 ± 0.2 2.40 ± 0.2 3.00 ± 0.2 B 7 9.0 + 0.5 (0402 ~ 1206) 14 ± 0.5 (2010 ~ 2512) PEAK REFLOW SOLDERING CONDITIONS 300 260°C 10 Sec. 250 1 ~ 5°C/Sec. 1 ~ 5°C/Sec. 200 150 120 Sec. 100 C 11.4 + 1.0 (0402 ~ 1206) 16.4 ± 1.0 (2010 ~ 2512) 180∅ ±3 w1 50 1 ~ 9°C/Sec. 0 A NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com