S Series F e at u r e s •100-1200A ratings •60mv and 75mv versions •0.5% accuracy class •Manganin (6J13) plate resistive element construction •T, L, and DIN type terminals •H59-1 (UNS 37700) Brass Terminal Construction High Current Shunts S e r i e s S p e c i f i c at i o n s Series SHD1-100C060DE SHT1-250C060DE SHL1-600C060DE SHL1-1K2C060DE SHD1-100C075DE SHT1-200C075DE SHT1-500C075DE SHL1-1K0C075DE SHT1-500C100DE Terminal Rated Type Construction Current DIN Plate 100 T Plate 250 L Plate 600 L Plate 1200 DIN Plate 100 T Plate 200 T Plate 500 L Plate 1000 T Plate 500 Voltage (mV) 60 60 60 60 75 75 75 75 100 Accuracy Class 0.50% 0.50% 0.50% 0.50% 0.50% 0.50% 0.50% 0.50% 0.50% characteristics Terminal Surface Coating Acid Wash and Passivation Resistor plate surface coating Acid Wash and Passivation Method of measurement Null Balance Resistance Bridge National standard GB/T7676-1998 (Direct acting indicating analog electrical measuring instruments and their accessories) Safety standard IEC610101-1: 1890 (Safety requirements for electrical equipment for measurement, control, and laboratory use-Part I: General requirements) Environmental standard SJ/T11363-2006 (Requirements for concentration limits for certain hazardous substances in electronic information products) Derating linearly from 25°C to 85°C dimensions in./mm SHT1-250C060DE SHT1-200C075DE SHD1-100C060DE SHD1-100C075DE 1.26" (32mm ±1) 0.47" (12mm ±1) 1.69" (43mm ±1) 0.35" (9mm ±1) 0.87" (22mm ±1) 2-φ8.5 +.5/-0 0.18" (4.5mm ±.5) 0.24" (6mm ±1) 0.39" (10mm ±1) 2-φ8.5 +.5/-0 2-M5 0.87" (22mm ±1) 1.97" (50mm ±1) 3.35" (85mm ±1) 4.09" (104mm ±1) 2-M5 3.35" (85mm ±1) (continued) 1.02"(26mm ±1) SHT1-250C060DE 4.61" (117mm ±1) 0.87"(22mm ±1) SHT1-200C075DE 4.57" (116mm ±1) 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • [email protected] 161 S Series High Current Laboratory Shunts dimensions (continued) in./mm SHT1-500C075DE SHL1-600C060DE 1.69" (43mm ±1) 0.47" (12mm ±1) 0.87" (22mm ±1) 1.46" (37mm ±.5) 0.24" (6mm ±1) 0.35" (9mm ±1) Ø 0.20" (5mm ±.5) Ø 0.53" (13.5mm ±.5) 45° chamfer 0.18" (4.5mm ±.5) 2-φ10.5 +.5/-0 2-M5 0.71" (18mm ±.5) 1.81" (46mm ±1) Ø 0.59" (15mm ±.5) 2-M3 1.57" (40mm ±.5) 1.57" (40mm ±1) 3.15" (80mm ±1) 4.13" (105mm ±1) 3.94" (100mm ±1) 4.96" (126mm ±1) SHT1-500C100DE SHL1-1K2C060DE SHL1-1K0C075DE 1.69" (43mm ±.5) 0.87" (22mm ±.5) 0.39" (10mm ±1) 1.57" (40mm ±1) 0.39" (10mm ±1) 0.24" (6mm ±.5) 2-Ø10.5 ±.2 2.56" (65mm ±1) 1.97" (50mm ±1) 2.36" (60mm ±1) 0.47" (12mm ±.5) 4-Ø11 +.5/-0 0.35" (9mm ±.5) 2-M5 0.71" (18mm ±.5) 1.77" (45mm ±.5) 2.72" (69mm ±1) 4.72" (120mm ±1) 5.75" (146mm ±1) 1.57" (40mm ±1) HO W TO ORDER 4.72" (120mm ±1) 6.69" (170mm ±1) Current 1K0 = 1000 amps 500 = 500 amps 200 = 200 amps 100 = 100 amps RoHS Compliant SHL1-1K0C075DE Series 162 Terminal Type Terminal Material T = T-type C = copper surface D = DIN-type treatment (std.) L = L-type N = nickel plating 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • [email protected] mV Tolerance 075 = 75mV D = ±0.5% 025 = 25mV F = ±1% 050 = 50mV 060 = 60mV