BA Series Aluminum Cased Resistor F e at u r e s A p p l i c at i o n s • Three extrusion forms available • Heatsinkable • Rugged design • Up to 1000 watts • Thermal cut-off available • Scalable, custom lengths available • Custom leads available • Dynamic Braking • Motor Starting • Power Control S ERIE S S PECI F IC A TION S Series BA1160 BA2320 BA3266 * Free air rating Wattage* 500 700 1000 Resistance range 0.5Ω - 18KΩ 10Ω - 10KΩ 10Ω - 10KΩ Tolerance ±10% ±10% ±10% Length 160mm 320mm 266mm characteristics Overload 5 times rated wattage for 10 sec. Power Rating Free air; greater with heatsink Dielectric Withstanding Voltage 2.5KV, 1 min., 50/60 Hz Insulation Resistance ≥100MΩ Working Voltage ≥800V Max. Surface Temp. 385°C Wire UL listed 3199 (continued) 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • [email protected] 129 BA Series Aluminum Cased Resistor D I M EN S ION S BA1 BA2 10" 254mm 1.18" 30mm L ø0.24" / 6.2mm 3.94" 100.0mm Thermostat (optional) 3.15 ~ 3.31" 80 ~ 84mm 4.92" 95mm 2.80" 71mm 12" 304.8mm L ø 0.23" / 5.8mm 3.43" 87.1mm 4.33" 110mm 5.49" 5.49" 139.5mm 139.5mm BA3 L 12" 304.8mm Wire, 12ga., 600v 2.95" 74.9mm 5.00" 127.0mm Thermostat (optional) 12" 304.8mm 2.13" 54.1mm OR D ERIN G IN F OR M A TION Thermal switch (optional) Form 1 = extrusion RoHS Compliant BAC1160100RKE Series B = block aluminum 130 Termination Length A = wire leads (mm) B = solid terminals Resistance Tolerance K = ±10% 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • [email protected] 17.72" 450.1mm Thermostat (optional) 1.18" 30.0mm