90 "E" Series RoHS Material Declaration 90 Series Prefix 91 92 93 95 90 Description Molded Vitreous Enamel 260 C 10 Seconds 2 1 Molded Vitreous Enamel 260 C 10 Seconds 2 1 Molded Vitreous Enamel 260 C 10 Seconds 2 1 Molded Vitreous Enamel 260 C 10 Seconds 2 1 Molded Vitreous Enamel 260 C 10 Seconds 2 1 SnAgCu SnAgCu SnAgCu SnAgCu SnAgCu RoHS Logo RoHS Logo RoHS Logo RoHS Logo RoHS Logo No No No No No e1 e1 e1 e1 e1 - - - - - - - - - - - - - - 57,383 111,644 29,860 1,157 31,895 - 26,975 115,584 9,252 340 9,361 - 34,806 121,078 7,543 250 6,905 - 1,368 121,160 5,676 240 6,604 - 11,602 123,841 4,534 170 4,679 - 768,060 1,000,000 0.60 838,489 1,000,000 0.75 829,419 1,000,000 1.00 864,952 1,000,000 2.50 855,176 1,000,000 8.00 Peak Reflow Deg C Time @ Peak (seconds) Number of Reflows MSL Terminal Finish RoHS Compliant Designation on Product Label Lead Free parts are identified on Packing list as Pb Free? Terminal Finish Category [per JESD97 or IPC-1066] Banned Materials Declaration ( ppm) Cadmium Lead Mercury Hexavalent Chromium (Chrome VI) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers (PBDE) Asbestos mixtures Chlorinated/Brominated dioxins Chlorofluorocarbons (CFC) Polychlorinated biphenyls Radioactive Substances Tin organic compounds Ethylene Glycol Ethers Azo Dyes Beryllium Critical Materials Declaration (ppm) Barium Cobalt Bismuth Copper Gold Palladium Phthalates Magnesium Short Chain paraffins Fully/Partially halogenated CFC's Polychlorinated naphthalenes Nickel Selenium Silver Methyl Bromide hydrobromofluorocarbons Tin Zinc Antimony Arsenic Others Part Weight in grams Note: The information provided in this declaration is true to the best of Ohmite's knowledge. Ohmite has derived most of the information listed in this declaration from documents provided by third parties, and assumes no liability to any inaccuracy of such information. RoHS compliant part number will end with the letter "E". Example: 91J250E -