TBHA 80-100 Bimetal Thermometer for isolated pipes Main Features For clamp-on mounting on isolated pipes Pipe diameter ¾" to 2" Class 1 according to EN 13190 Immersion tube brass Applications Water & Waste water Energy Machinery HVAC Technical Data Nominal size 80, 100 mm Case Stainless steel 1.4301 (AISI 304) Temperature range -20 ... 120°C Bezel ring Stainless steel 1.4301 (AISI 304) Accuracy Class 1 (according to EN 13190) Window Instrument glass Protection rating IP 50 (EN 60529) Dial Aluminium, white Immersion tube Stainless steel 1.4571 (AISI 316 Ti) Pointer Aluminium, black Base Fixing tube: brass Socket: zinc casting Hose clamp Steel, zinc-plated Options Code 0581 Silicon free, label marking Code 0793 Silicon free, marking on dial Code 0794 Red mark Code 9700 Green mark Code 9701 Customer logo on dial Code 9710 Specific technical data on dial Code 9711 To be ordered separately Calibration certificate (3 points) 90001188 Design and specifications subject to change without notice Dampening grease Temperature ranges Code Range -20 ... 40 11T 0 ... 60 27T 0 ... 80 12T 0 ... 100 20T 0 ... 120 www.baumer.com 2014-07-08 °C 52T Data sheet B21 T1.307 TBHA 80-100 Page 1 / 3 TBHA 80-100 Bimetal Thermometer for isolated pipes Installation instructions lT 18,5 Ø 19 Base Fixing tube Ø8 Ø 80, 100 lT-1 Socket 40 Base T 9302 Selection Chart for Installation accessories Hose clamp (DIN 3017) (2) Base (1) Ordering code ØD Ordering code 30-50 mm s T 09302.0000 27-42 mm (¾-1¼ inches) A 08476.0000 50-70 mm T 09302.0001 42-60 mm (1¼-2 inches) A 08476.0001 70-90 mm T 09302.0002 90-110 mm T 09302.0003 s = insulating material thickness included in delivery (2) not included in delivery (1) Hose clamp A 8476 Mounting instructions TBHA 80, 100 www.baumer.com The pipe roughness should be free of paint drops and welding beads so that there is a smooth surface. (Concerned the complete area of support from the base) NS Weight (kg) 80 0.150 100 0.180 Data sheet B21 T1.307 TBHA 80-100 Page 2 / 3 Design and specifications subject to change without notice Hose clamp A 8476 2014-07-08 In th sul ic at kn in es g s ma s te ria l Pipe Ø D lT lT Base T 9302 TBHA 80-100 Bimetal Thermometer for isolated pipes Ordering details TBHA TBHA Model Bimetal Thermometer for pipe mounting Nominal size 80 mm 100 mm – . 2 . 1 xxx / TBHA 0 1 8 0 0 0 – Case Stainless steel 1.4301 (AISI 304) Connection With base for mounting on pipes (hose clamp not included) Immersion tube outlet Center back 2 1 2 Indication EN 13190 (Standard) Immersion tube / diameter / material Ø 8 mm, stainless steel 1.4571 (AISI 316 Ti) Immersion tube / installed length lT = 55 mm (s = 30-50 mm) lT = 75 mm (s = 50-70 mm) lT = 95 mm (s = 70-90 mm) lT = 115 mm (s = 90-110 mm) . 1 6 1 2 3 4 . Unit of measurement / Temperature ranges °C Options to be added behind the / (see example below) (1) (1) xxT / Available standard temperature ranges, see table on page 1. For ranges not listed, please contact Baumer. Ordering example with options TBHA 100 – 2 1 2 . 1 6 2 . 12T / 9710 _ 9700 _ 0793 Bimetal thermometer for pipe mounting Nominal size 100 mm Design and specifications subject to change without notice Case material stainless steel 1.4301 (AISI 304) With base for mounting on pipes Immersion tube outlet: Center back Indication EN 13190 (standard) Immersion tube Ø 8 mm, stainless steel 1.4571 (AISI 316 Ti) Installed length: s = 50-70 mm, lT = 75 mm Temperature range: 0 ... 100°C Option: Customer logo on dial Option: Red mark 2014-07-08 Option: Silicon free, label marking www.baumer.com Data sheet B21 T1.307 TBHA 80-100 Page 3 / 3