K3100G Series OBSOLETE 14 pin DIP, 5.0 Volt, Clock Oscillator K3100G Series K3100G Series 3.3V Crystal Clock Oscillators THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS. Oscillators PLEASE REFER TO THE MHO3 PRODUCT SERIES.3.3V Crystal Clock TTL/CMOS Compatible Tight Symmetry (45/55%) Available TTL/CMOS Compatible Tri-State Option Available Tight Symmetry (45/55%) Available ±100ppm Stability Standard - K3100GC Tri-State Option Available Tighter Stabilities Available ±100ppm Stability Standard - K3100GC ±25ppm Stability:- K3100GA Tighter Stabilities Available ±50ppm Stability:- K3100GB ±25ppm Stability:- K3100GA Case Ground for EMI Protection ±50ppm Stability:- K3100GB Case Ground for EMI Protection E L E C T R I C A L S P E C I F I C AT I O N S K3100GA K3100GC E L E C T R I C A L K3100GB S P E C I F I C AT I O N S MODEL Frequency Range (MHz) MODEL Frequency Stability (ppm) Frequency Range (MHz) OverallStability (ppm) Frequency 0°C to 70°C Overall -40°C to 85°C 0°C to 70°C Temperature Range (°C) -40°C to 85°C Operating Temperature Range (°C) Storage Operating Supply Voltage (V) Storage Supply Current (mA) Supply Voltage (V) Output CMOS Supply Current (mA) K3100GA 1.0 to 125 K3100GB Inclusive of calibration, temperature, voltage, load, shock,vibration, aging ±25of calibration, temperature, ±50 ±100aging Inclusive voltage, load, shock,vibration, N/A ±25 ±50 ±50 ±100 ±100 N/A ±50 -40°C to +85°C ±100 -55°C to +125°C -40°C to +85°C +3.3 ±5% -55°C to +125°C <30 +3.3 ±5% “0” Level (VOL) <30 0.9 VCC “1” “0” Level (VOH OL)) 0.1 0.9 VCC Output CMOS Load “1” Level (VOH) TR & TF (ns) Load Symmetry (%) T R & TF (ns) Jitter (Typical) Symmetry (%) K3100GC 1.0 to 125 Up to 80MHz0.1 50pF; >80MHz 30pF VCC <10 >80MHz 30pF Up to 80MHz 50pF; 40/60 <10 Start up Time (ms) Jitter (Typical) 10ps RMS @ 100MHz 40/60 <10 10ps RMS @ 100MHz Start up Time (ms) <10 PA R T N U M B E R I N G G U I D E K3100GXXXX - Specify PA R TFrequency NUMBERING GUIDE = Fixed Frequency K3100GXXXX - Specify “Blank” Frequency “E” = Tri-State “Blank” = Fixed Frequency “Blank” = 0oC to 70oC Operating Temperature “E” = Tri-State o o “M” = -40 “Blank” = 0CoCtoto8570CoCOperating OperatingTemperature Temperature “Blank” = 40/60% Symmetry “M” = -40oC to 85oC Operating Temperature “S” = 45/55 Symmetry “Blank” = 40/60% Symmetry ±25ppm Frequency Stability (Available 0/70oC only) “A” “S” = 45/55 Symmetry “B” = ±50 ppm Frequency Stability Frequency Stability (Available 0/70oC only) “A” ±25ppm “C” = ±100ppm Frequency Stability “B” = ±50 ppm Frequency Stability “C” = herein ±100ppm Frequency Stability MtronPTI reserves the right to make changes to the product(s) and service(s) described without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 2553 N. Edgington Street, Franklin Park, IL 60131 Phone: 847.451.1000 Fax: 847.451.7585 2553 N. Edgington Street, Franklin Park, IL 60131 Phone: 847.451.1000 800-888-1499 or www.champtech.com Fax: 847.451.7585Revision: 03-02-07 K3100G Series OBSOLETE 14 pin DIP, 5.0 Volt, Clock Oscillator K3100G Series 3.3VK3100G Crystal Clock Oscillators Series THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS. 3.3V Crystal Clock Oscillators FUNCTION PLEASE REFER TO THE MHO3 PRODUCTPINSERIES. 1 PIN 7 8 1 14 7 N/C / Tri-State FUNCTION Ground Output N/C / Tri-State + VCC Ground 8 Output 14 + VCC SHIPPING TUBE CROSS SECTION SHIPPING TUBE CROSS SECTION OUTPUT WAVEFORM TEST CIRCUIT DIAGRAM OUTPUT WAVEFORM TEST CIRCUIT DIAGRAM MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS TEST METHODS REFERENCE PROCEDURES DESCRIPTION MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS -55°C to +125°C; Air-to-Air; 100 cycles; 10 min. dwell DESCRIPTION Temperature Cycle MIL-STD-833, Mtd 1010, Cond. B Mechanical Shock Temperature Cycle Vibration Mechanical Shock Humidity Steady State MIL-STD-883, Mtd 2002, Cond. B MIL-STD-833, Mtd 1010, Cond. B MIL-STD 883, Mtd 2007, Cond. B MIL-STD-883, MIL-STD-202, Mtd 2002, 103 Cond. B Vibration Shock Thermal Humidity Steady State Electrostatic Discharge MIL-STD 883, Mtd 2007, MIL-STD-883, 1011.7Cond. Cond.BB MIL-STD-202, MIL-STD-883, Mtd 103 3015 Class II Thermal Shock Solderability Hermeticity Electrostatic Discharge MIL-STD-883, Mtd 1011.7 2022.2 Cond. B MIL-STD-883, Mtd 3015 1014.8, Cond. Class II A1 Solderabilityto Soldering Resistance Lead Integrity Hermeticity MIL-STD-883, Mtd 210D, 2022.2Cond. J Solder dip; Meniscograph Criteria MIL-STD-202, 235°C; 30 seconds MIL-STD-883, Mtd 1014.8, 2004.5, Cond. A, stress A1B1 Lead Mass tension spectro.&2bend x 10-8 atmos. CC/sec He TEST METHODS REFERENCE PROCEDURES 1500 -55°Cg’tos +125°C; Air-to-Air; 100 cycles; 10 min. dwellHz; 0.06 inch; 15g’s; 3 planes 20-2000 1500 g’90%-95% s 40°C; R.H.; 56 days 20-2000 inch; 15g’s; 315 planes 100°C to Hz; 0°C;0.06 Water-to-Water; cycles 40°C; 90%-95% R.H.; 56 days 2 KV to 4 KV Threshold 100°C to 0°C; Water-to-Water; 15 cycles Solder dip; Meniscograph Criteria Mass spectro. 2 x 10-8 atmos. CC/sec He 2 KV to 4 KV Threshold MIL-STD-202, 235°C; 30 seconds MIL-STD-883, Mtd 210D, 2015.8Cond. J Resistance to solvents MIL-STD-883, Mtd 2004.5, tension & bend stress 1005.6 Cond. A, B1 Lead 125°C, powered, 1000 hours minimum MIL-STD-883, Mtd 2015.8 Resistance to solvents Marking Permanence MtronPTI reserves right to make changes to theFranklin product(s) and service(s) hereinPhone: without notice. No liability is assumedFax: as a result of their use or application. 2553 N. the Edgington Street, Park, IL described 60131 847.451.1000 847.451.7585 MIL-STD-883, Mtd 1005.6 Life Test 125 °C, powered, 1000 hours minimum Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. Resistance to Soldering Marking Permanence LeadTest Integrity Life 800-888-1499 www.champtech.com 2553 N. Edgington Street, Franklin Park, ILor60131 Phone: 847.451.1000 2 800-888-1499 or www.champtech.com Fax: 847.451.7585 Revision: 03-02-07