MtronPTI HPO Series For Harsh Environment Applications Electrical Specifications: Parameter Frequency of Operation Symbol Min. FO 25.000 Typ. Max. Units 150.000 MHz Conditions Frequency Stabilities Frequency Stability Over the Temperature Range F/F Total Frequency Stability Over 20-years (ref. Model Table) -5 +5 -25 +25 -50 ppm Over -55˚C to +125˚C (FMax - FMin)/2 ppm Includes tolerance at +25°C, variation in supply voltage, deviation over operating temperature range and 20 years aging @ +25°C +50 Output Output Type Output Load Symmetry (duty cycle) Logic “1” Level Logic “0” Level Rise/Fall Time Random Jitter Phase Jitter Period Jitter Cycle to Cycle Jitter HCMOS/TTL Compatible 15 TDC VOH VOL TR/TF 45 90% VDD 55 10% VDD 3 4 1 5 5 1.8 фJ pF/TTL % V V nS pS RMS pS RMS pS RMS pS ½ VDD HCMOS load From 10% to 90% VDD Integrated 12kHz to 20MHz RMS SSB Phase Noise -70 -104 -123 -130 -135 Typical (100MHz) Under Static Conditions dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz @ 10Hz Offset @ 100Hz Offset @ 1000Hz Offset @ 10kHz Offset @ 100kHz Offset Additional Specifications 80% VDD or N/C Tristate Enable Logic Tristate Disable Logic Start-up Time TSU Operating Voltage Operating Current VDD IDD 3.135 Operating Temperature Storage Temperature TA TS -55 -55 V Pad 1, Clock Signal Output 0.5 10 V mS Pad 1, Output to High-Z 3.465 90 V mA Supply 3.3 Temperature Range +125 +125 °C °C Environmental, Mechanical & Test Report Requirements: Per MIL-STD-202, Method 213, Condition C (100 g’s, 6 ms duration, ½ sinewave) Per MIL-STD-202, Method 201 & 204 (10 g’s from 10-2000 Hz) Per MIL-STD-883, Method 1010, B (-55°C to 125°C, 15 min. dwell, 10 cycles) Per MIL-STD-202, Method 112 (1 x 10-8 atm cc/s of Helium) Per EIAJ-STD-002 6 Pad Ceramic Leadless or 4-lead Gull Wing Configuration (Ref. Figure 1 and Figure 2) Mechanical Shock Vibration Thermal Cycle Hermeticity Solderability Package Type Special Screening Steps: The parts shall be subjected to the following screening sequence after they are sealed. 1. 2. 3. Burn-in: 168-hours minimum @ +125˚C Frequency vs Temperature Test Final Electrical Test 1 of 2 MtronPTI may change specifications without notice to improve end application performance or product manufacturability. No liability is assumed as a result of product use or application. Please contact MtronPTI for latest information. MtronPTI HPO Series For Harsh Environment Applications Dimensions, Pin Out, & Marking Information: Pad 1 2 3 4 5 6 Lead 1 Function Tristate N/C Ground Output N/C +VDD 2 3 4 Line 1 Line 2 Line 3 Part Marking HPO-xxxx fffMffffff M yyww Figure 1 – Leadless Configuration yy ww Legend Year Work week Figure 2: Gull Wing Leaded Configuration Part Number & Ordering Information: MtronPTI Model HPO-310 HPO-311 HPO-320 HPO-321 Package Style 6-pad Leadless 4 Gull Wing Leads Frequency Stability ±50ppm ±25ppm ±50ppm ±25ppm Order Code Convention: MtronPTI Model # and Frequency (ex.; HPO-310-62.2080MHz: 6-pad leadless configuration, ±50ppm 20-year stability @ 62.208MHz) Consult the factory for additional supply voltage requirements. Datasheet Revision Table: Date 05/23/13 Rev. - Author BRM Details of Revision Original Release 2 of 2 MtronPTI may change specifications without notice to improve end application performance or product manufacturability. No liability is assumed as a result of product use or application. Please contact MtronPTI for latest information.