K500F Series OBSOLETE 8 pin DIP, 5.0 Volt, CMOS/TTL, Clock Oscillator K500F Series THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS. 5V Crystal Clock Oscillators 4-pin Package, Compatible with 8-pin DIL 1.5MHz to 100MHz Frequency Range TTL/CMOS Compatible Tight Symmetry (45/55%) Available Tri-State Option Available ±100ppm Stability Standard - K1100FC Tighter Stabilities Available ±25ppm Stability:- K1100FA ±50ppm Stability:- K1100FB Case Ground for EMI Protection E L E C T R I C A L S P E C I F I C AT I O N S MODEL K500FA K500FB Frequency Range (MHz) K500FC 1.5 to 125 Frequency Stability (ppm) Overall Inclusive of calibration, temperature, voltage, load, shock,vibration, aging 0°C to 70°C ±25 ±50 ±100 -40°C to 85°C N/A ±50 ±100 Temperature Range (°C) Operating -40°C to +85°C Storage -55°C to +125°C Supply Voltage (V) +5.0 ±5% Supply Current (mA) <30 Output TTL/CMOS “0” Level (VOL) 0.9 VCC “1” Level (VOH) 0.1 VCC Load Up to 80MHz 50pF; >80MHz 30pF TR & TF (ns) <10 Symmetry (%) 40/60 Jitter (Typical) 10ps RMS @ 90MHz Start up Time (ms) <10 PA R T N U M B E R I N G G U I D E K500FXXXX - Specify Frequency “Blank” = Fixed Frequency “E” = Tri-State “Blank” = 0oC to 70oC Operating Temperature “M” = -40oC to 85oC Operating Temperature “Blank” = 40/60% Symmetry “S” = 45/55 Symmetry “A” ±25ppm Frequency Stability (Available 0/70oC only) “B” = ±50 ppm Frequency Stability “C” = ±100ppm Frequency Stability MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. 2553 N. Edgington Street, Franklin Park, IL 60131 Phone: 847.451.1000 Fax: 847.451.7585 Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 800-888-1499 or www.champtech.com 1 Revision: 03-01-07 K500F Series OBSOLETE 8 pin DIP, 5.0 Volt, CMOS/TTL, Clock Oscillator K500F Series K500F Series 5V Crystal Clock Oscillators 5V Crystal Clock Oscillators PIN FUNCTION 1PIN FUNCTION N/C / Tri-State 21 N/C / Tri-State Ground 32 Output Ground + Output VCC 43 4 + VCC SHIPPING TUBE CROSS SECTION SHIPPING TUBE CROSS SECTION TEST CIRCUIT DIAGRAM TEST CIRCUIT DIAGRAM OUTPUT WAVEFORM OUTPUT WAVEFORM MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS TEST METHODS TEST METHODS Temperature Cycle REFERENCE PROCEDURES REFERENCE PROCEDURES MIL-STD-833, Mtd 1010, Cond. B DESCRIPTION DESCRIPTION -55°C to +125°C; Air-to-Air; 100 cycles; 10 Temperature Cycle Mechanical Shock MIL-STD-833, Mtd 1010, Cond. B MIL-STD-883, Mtd 2002, Cond. B min. dwell -55°C to +125°C; Air-to-Air; 100 cycles; 10 min. dwell 1500 g’s Mechanical Shock Vibration MIL-STD-883, Mtd2007, 2002,Cond. Cond.BB MIL-STD 883, Mtd 1500 g’sHz; 0.06 inch; 15g’s; 3 planes 20-2000 VibrationSteady State Humidity MIL-STD 883,Mtd Mtd103 2007, Cond. B MIL-STD-202, 20-2000 Hz; 0.06 inch; 40°C; 90%-95% R.H.; 5615g’s; days 3 planes HumidityShock Steady State Thermal MIL-STD-202,Mtd Mtd1011.7 103 Cond. B MIL-STD-883, 40°C;to 90%-95% R.H.; 56 days15 cycles 100°C 0°C; Water-to-Water; Thermal Shock Electrostatic Discharge MIL-STD-883,Mtd Mtd3015 1011.7 Cond. MIL-STD-883, Class II B toKV 0°C; Water-to-Water; 15 cycles 2100°C KV to 4 Threshold Electrostatic Discharge Solderability Hermeticity Solderability MIL-STD-883,Mtd Mtd2022.2 3015 Class II MIL-STD-883, MIL-STD-883, MIL-STD-883,Mtd Mtd1014.8, 2022.2Cond. A1 2 KV to 4 KV Threshold Criteria Solder dip; Meniscograph Mass spectro. 2 x 10-8 atmos. CC/sec He Solder dip; Meniscograph Criteria MIL-STD-883,Mtd Mtd210D, 1014.8, Cond. Hermeticityto Soldering MIL-STD-202, Mass spectro. 2 x 10-8 atmos. CC/sec He Cond. J A1 235°C; Resistance 30 seconds Lead Integrityto Soldering MIL-STD-883, tension & bend stress MIL-STD-202,Mtd Mtd2004.5, 210D, Cond. JA, B1 Lead Resistance 235°C; 30 seconds MIL-STD-883,Mtd Mtd2015.8 2004.5, Cond. A, B1 Resistance Lead Integrity Lead tension & bend stress MIL-STD-883, Marking Permanence to solvents Life Test Permanence Marking MIL-STD-883, MIL-STD-883,Mtd Mtd1005.6 2015.8 Resistance to solvents 125 °C, powered, 1000 hours minimum MtronPTI to the product(s) and service(s) described herein without notice. liability is assumed as a result of their use or application. Lifereserves Test the right to make changes MIL-STD-883, Mtd 1005.6 125 °C,Nopowered, 1000 hours minimum 2553 N. Edgington Street, Franklin Park, IL 60131 Phone: 847.451.1000 Fax: 847.451.7585 Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 2553 N. Edgington Street, Franklin Park, IL 60131 Phone: 847.451.1000 Fax: 847.451.7585 800-888-1499 or www.champtech.com Revision: 03-01-07 800-888-1499 or www.champtech.com 2