ROHM UMW2N

EMW2 / EMX2 / EMX3 / UMW2N /UMX2N /
UMX3N / FMW2 / IMX2 / IMX3
Transistors
General purpose (dual transistors)
EMW2 / EMX2 / EMX3 / UMW2N / UMX2N /
UMX3N / FMW2 / IMX2 / IMX3
zFeatures
1) Two 2SC2412AK chips in a EMT or UMT or SMT package.
zEquivalent circuit
EMW2 / UMW2N
(3)
(4)
(2)
FMW2
(1)
(3)
(5)
(2)
(4)
(5)
(1)
EMX2 / UMX2N
IMX2
(3)
(4)
(2)
(1)
(4) (5)
(6)
EMX3 / UMX3N
(5)
(6)
(3) (2)
(1)
(3)
(2)
(5)
(4)
IMX3
(1)
(4)
(6)
(5)
(2)
(3)
(6)
(1)
zAbsolute maximum ratings (Ta = 25°C)
Symbol
Limits
Unit
Collector-base voltage
VCBO
60
V
Collector-emitter voltage
VCEO
50
V
Emitter-base voltage
VEBO
7
V
IC
150
mA
Parameter
Collector current
EMW2 / EMX2 / EMX3 / UMW2N / UMX2N / UMX3N
Collector power
dissipation
150(TOTAL)
PC
FMW2 / IMX2 / IMX3
Junction temperature
Storage temperature
mW
300(TOTAL)
Tj
150
°C
Tstg
−55~+150
°C
∗1
∗2
∗1 120mW per element must not be exceeded.
∗2 200mW per element must not be exceeded.
zElectrical characteristics (Ta = 25°C)
Symbol
Min.
Typ.
Max.
Unit
Collector-base breakdown voltage
Parameter
BVCBO
60
−
−
V
IC=50µA
Collector-emitter breakdown voltage
BVCEO
50
−
−
V
IC=1mA
Emitter-base breakdown voltage
Collector cutoff current
BVEBO
ICBO
7
−
−
−
−
0.1
V
µA
IE=50µA
VCB=60V
IEBO
−
−
0.1
µA
VEB=7V
VCE(sat)
−
−
0.4
V
IC/IB=50mA/5mA
Emitter cutoff current
Collector-emitter saturation voltage
Conditions
hFE
120
−
560
−
Transition frequency
fT
−
180
−
MHz
Output capacitance
Cob
−
2
3.5
pF
DC current transfer ratio
VCE=6V, IC=1mA
VCE=12V, IE=−2mA, f=100MHz
VCB=12V, IE=0mA, f=1kHz
∗Transition frequency of the device.
zPackage, marking, and packaging specifications
Type
EMW2
EMX2
EMX3
UMW2N
UMX2N
UMX3N
FMW2
IMX2
IMX3
Package
EMT5
EMT6
EMT6
UMT5
UMT6
UMT6
SMT5
SMT6
SMT6
Marking
Code
W2
T2R
X2
T2R
X3
T2R
W2
TR
X2
TR
X3
TR
W2
T148
X2
T108
X3
T108
Basic ordering unit (pieces)
8000
8000
8000
3000
3000
3000
3000
3000
3000
∗
EMW2 / EMX2 / EMX3 / UMW2N /UMX2N /
UMX3N / FMW2 / IMX2 / IMX3
Transistors
zExternal dimensions (Units : mm)
(6)
0.5
Each lead has same dimensions
1.3
2.0
0.65
1.25
2.1
Each lead has same dimensions
FMW2
0.9
0to0.1
0.7
0.15
0.9
0to0.1
0.7
0.15
2.1
0.1Min.
ROHM : UMT5
EIAJ : SC-88A
0.65
(3)
(6)
1.3
(4)
UMX2N / UMX3N
1.25
0.1Min.
0.5 0.5
1.0
1.6
(1)
ROHM : EMT6
2.0
0.65 0.65
(1)
(5)
(2)
0.2
(4)
UMW2N
(3)
Each lead has same dimensions
0.2
ROHM : EMT5
(2)
1.2
1.6
0.13
(1)
0.5
0.13
1.2
1.6
(5)
(5)
(5)
(3)
(4)
(2)
(2)
(1)
(3)
(4)
0.22
0.5 0.5
1.0
1.6
EMX2 / EMX3
0.22
EMW2
Each lead has same dimensions
ROHM : UMT6
EIAJ : SC-88
0to0.1
0.3to0.6
Each lead has same dimensions
ROHM : SMT6
EIAJ : SC-74
0.95 0.95
1.9
2.9
(1)
(3)
1.1
0.8
0to0.1
1.1
0.15
2.8
0.8
0.15
ROHM : SMT5
EIAJ : SC-74A
(2)
(5)
(4)
1.6
1.6
2.8
0.3to0.6
(6)
0.3
2.9
0.95 0.95
1.9
(3)
(5)
(1)
(4)
(2)
0.3
IMX2 / IMX3
Each lead has same dimensions
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document use silicon as a basic material.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.0