RENESAS HD74LS136FPEL

HD74LS136
Quadruple 2-Input Exclusive-OR Gates
(with open collector outputs)
REJ03D0433–0300
Rev.3.00
Jul.13.2005
Features
• Ordering Information
Part Name
Package Type
Package Code
(Previous Code)
Package
Abbreviation
Taping Abbreviation
(Quantity)
HD74LS136FPEL
SOP-14 pin (JEITA)
PRSP0014DF-B
(FP-14DAV)
FP
EL (2,000 pcs/reel)
Pin Arrangement
1A
1
14
VCC
1B
2
13
4B
1Y
3
12
4A
2A
4
11
4Y
2B
5
10
3B
2Y
6
9
3A
GND
7
8
3Y
(Top view)
Function Table
Inputs
A
L
L
H
H
Note: H ; high level,
L ; low level,
X ; irrelevant.
Rev.3.00, Jul.13.2005, page 1 of 3
B
L
H
L
H
Output
Y
L
H
H
L
HD74LS136
Absolute Maximum Ratings
Symbol
Ratings
Unit
Supply voltage
Item
VCC
7
V
Input voltage
VIN
7
V
Power dissipation
PT
400
mW
Tstg
–65 to +150
°C
Storage temperature
Note: Voltage value, unless otherwise noted, are with respect to network ground terminal.
Recommended Operating Conditions
Symbol
Min
Typ
Max
Unit
Supply voltage
Item
VCC
4.75
5.00
5.25
V
High level output voltage
VOH
—
—
5.5
V
Low level output current
IOL
—
—
8
mA
Operating temperature
Topr
–20
25
75
°C
Electrical Characteristics
(Ta = –20 to +75 °C)
Item
Symbol
min.
typ.*
max.
Unit
Input voltage
VIH
VIL
2.0
—
—
—
—
0.8
V
V
Output current
IOH
—
—
100
µA
Output voltage
VOL
—
—
—
—
—
—
—
—
—
—
—
—
6.1
—
0.4
0.5
40
–0.8
0.2
10
–1.5
IIH
IIL
Input current
V
µA
mA
mA
mA
V
Condition
VCC = 4.75 V, VIH = 2 V, VIL = 0.8 V,
VOH = 5.5 V
IOL = 4 mA
VCC = 4.75 V, VIH = 2 V,
VIL = 0.8 V,
IOL = 8 mA
VCC = 5.25 V, VI = 2.7 V
VCC = 5.25 V, VI = 0.4 V
VCC = 5.25 V, VI = 7 V
VCC = 5.25 V
VCC = 4.75 V, IIN = –18 mA
II
Supply current**
ICC
Input clamp voltage
VIR
Notes: * VCC = 5 V, Ta = 25°C
** ICC is measured with one input of each gate at 4.5 V, the other inputs grounded, and the outputs open.
Switching Characteristics
(VCC = 5 V, Ta = 25°C)
Item
Propagation
delay time
Symbol
tPLH
tPHL
tPLH
tPLH
min.
—
—
—
—
typ.
18
18
18
18
max.
30
30
30
30
Unit
Inputs
Condition
ns
A or B
Other
inputs ”L”
ns
A or B
Other
inputs ”H”
CL = 15 pF,
RL = 2 kΩ
Note: Refer to Test Circuit and Waveform of the Common Item "TTL Common Matter (Document No.: REJ27D00050100)".
Rev.3.00, Jul.13.2005, page 2 of 3
HD74LS136
Package Dimensions
JEITA Package Code
P-SOP14-5.5x10.06-1.27
RENESAS Code
PRSP0014DF-B
*1
Previous Code
FP-14DAV
D
MASS[Typ.]
0.23g
NOTE)
1. DIMENSIONS"*1 (Nom)"AND"*2"
DO NOT INCLUDE MOLD FLASH.
2. DIMENSION"*3"DOES NOT
INCLUDE TRIM OFFSET.
F
14
8
c
HE
*2
E
bp
Index mark
Reference
Symbol
Terminal cross section
( Ni/Pd/Au plating )
1
Z
*3
Nom
Max
D
10.06
10.5
E
5.50
A2
7
e
A1
bp
Dimension in Millimeters
Min
x
M
0.00
0.10
0.20
0.34
0.40
0.46
0.15
0.20
0.25
7.80
8.00
2.20
A
L1
bp
b1
c
A
c
A1
θ
y
L
Detail F
1
θ
0°
HE
7.50
1.27
e
x
0.12
y
0.15
1.42
Z
0.50
L
L
Rev.3.00, Jul.13.2005, page 3 of 3
8°
1
0.70
1.15
0.90
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary
circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
http://www.renesas.com
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology (Shanghai) Co., Ltd.
Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, China
Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> 2-796-3115, Fax: <82> 2-796-2145
Renesas Technology Malaysia Sdn. Bhd.
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
© 2005. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .3.0