Single Window Single Mode Wideband Fiber Coupler (1x3) SWFC1x3 Series Product Description Oplink’s single window, single mode wideband fiber couplers are highly stable for multi-port optical signal splitting. They have very good uniformity, low excess loss and very low polarization sensitivity. All devices are tested according to industry standard test procedures and are supplied with all pertinent measurement data. Oplink can provide customized designs to meet specialized feature applications. Also, Oplink offers modular assemblies that integrate other components to form a full function module or subsystem. L Port 1 Comm Port 2 Ø Port 3 Performance Specificationns SWFC53/33 Series (1x3) Features Premium Grade A Configuration Operating Wavelength Range Unit 1x3 Single Fusion Compact Package Ultra Low Polarization Sensitivity 1290~1330 or 1528~1565 or 1570~1610 nm Wavelength Independent Highly Stable & Reliable Insertion Loss [1] < 5.5 < 5.8 dB Uniformity < 0.9 < 1.3 dB Polarization Dependent Loss < 0.10 < 0.16 dB Temperature Dependent Loss < 0.15 < 0.20 dB Directivity > 55 dB Maximum Power Handling 500 mW Operating Temperature Range - 10 to + 70 °C CATV Storage Temperature Range - 40 to + 85 °C Local Area Networks Package Dimensions [2] P1: 250µm bare fiber P2: 900µm loose tube P3: 3mm cable (Ø) 3.0 x (L) 60.0 (Ø) 3.0 x (L) 70.0 (L) 96.0 x (W) 17.0 x (H) 6.4 Applications Subscriber Loops mm Telecommunications Note: [1] Values are referenced without connector loss. [2] Couplers with unequal splitting ratio are also available. Please contact Oplink Sales and Marketing Department for more detailed information. [3] The mechanical tolerance should be +/- 0.2 mm on all package dimensions unless otherwise custom specified. S0169 - R10. (web) 20120518 Single Window Single Mode Wideband Fiber Coupler (1x3) SWFC1x3 Series Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. SWFC Wavelength 1550nm = 5 1310nm = 3 3 Type 1x3 = 3 3 3 Split Ratio 33/33/33/33 = 33 0 Grade 0 Premium Grade = P A Grade = A Fiber Length* 0.5 meter = H 1.0 meter = 1 1.5 meters = 5 2.0 meters = 2 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com Package & Fiber Type P1 + 250µm bare fiber = 11 P2 + 900µm loose tube = 22 P3 + 3 mm cable = 33 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC = 9 MU = A Notes : * The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead time for special fiber length will be longer. S0169 - R10. (web) 20120518 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Transmission Interconnect RGB Laser Modules