Absolute Maximum Ratings Electro-Optical

OSA Opto Light GmbH
Köpenicker Str. 325 / Haus 201
12555 Berlin - Germany
Tel. +49 (0)30 65 76 26 83
Fax: +49 (0)30 65 76 26 81
E-Mail: contact@osa-opto.com
preliminary
Series 330 - 1206 with Lens
thin film technology
Features
-
with lens. mounting from backside of PCB
view angle 40°
size 1206: 3.2(L) x 1.6(W) x 1.9(H) mm
circuit substrate: glass laminated epoxy
devices are ROHS conform
lead free solderable. soldering pads: gold plated
taped in 8 mm blister tape. cathode to transporting
perforation
all devices sorted into luminous intensity classes
taping: face-up (TU) or face-down (TD) possible
high luminous intensity types
on request sorted in color classes
Absolute Maximum Ratings
IF, max[mA]
30
IF,P [mA] tp ≤
100 µs τ=1: 10
70
VR [V]
IR, max [µA]
5
100
Thermal resistance
R thJA [K / W]
450
TOp [°C]
TSt °[C]
-40...85
-40...85
30
IF [mA]
-
Maximal
forward
current (DC)
characteristic
20
10
0
-40
-20
0
20
40
60
80
100
Top[°C]
Electro-Optical Characteristics
Type
OLS-330 MY
OLS-330 MD
OLS-330 MSD
Emitting
color
yellow
orange
red
Marking
at
anode
anode
anode
Measurement
IF [mA]
20
20
20
typ
2.1
2.1
2.1
VF[V]
max
2.6
2.6
2.6
λ d / λ p*
[nm]
589
615
624
IV[mcd]
min
typ
900
1400
1400
2500
900
1400
© 2010
OSA Opto Light GmbH — Tel. +49-(0)30-65 76 26 83 — Fax +49-(0)30-65 76 26 81 — contact@osa-opto.com
preliminary edition 08/10
90
120
1,0
60
150
30
0,5
view angle
0,0
180
0
IF (mA)
10
UF – IF
characteristic
1
1,6
1,7
1,8
1,9
2,0
2,1
2,2
2,3
2,4
UF (V)
Iv rel (at 20 mA )
2
1
IF – Iv, rel
characteristic
0
20
IF (mA)
© 2010
OSA Opto Light GmbH — Tel. +49-(0)30-65 76 26 83 — Fax +49-(0)30-65 76 26 81 — contact@osa-opto.com
preliminary edition 08/10
Outline Drawing
Recommended Soldering Patterns
Pad TU
Pad TD
Soldering Conditions
300
250
Temperature (°C)
10-20 s
230°C
200
150
IR reflow
soldering
profile
Max. 40 s
100
50
0
50
100
150
200
250
300
Time (sec)
IR reflow
soldering
profile for lead
free soldering
Manual soldering:
max power of iron 25W/ 3s/ 300°C
© 2010
OSA Opto Light GmbH — Tel. +49-(0)30-65 76 26 83 — Fax +49-(0)30-65 76 26 81 — contact@osa-opto.com
preliminary edition 08/10
Ordering Code For Parts
Series
Color
OLS-330
-
???????
Encapsulation
-
X
-
Packaging
?
TU - taped up
TD - taped down
X - uncolored clear
Type definition, e.g. OLS-330 MY-X -TU
LED Luminous Intensity Groups And Subgroups [ mcd ]
(general information – not this device specific)
C:
D:
E:
F:
G:
H:
J:
K:
L:
M:
N:
P:
Q:
R:
S:
T:
U:
V:
W:
X:
Y:
Z:
0.28
0.45
0.71
1.12
1.80
2.80
4.50
7.10
11.20
18
28
45
71
112
180
280
450
710
1120
1800
2800
4500
-
0.45
0.71
1.12
1.80
2.80
4.50
7.10
11.20
18.00
28
45
71
112
180
280
450
710
1120
1800
2800
4500
7100
C1:
C2:
D1:
D2:
E1:
E2:
F1:
F2:
G1:
G2:
H1:
H2:
J1:
J2:
K1:
K2:
L1:
L2:
M1:
M2:
N1:
N2:
0.28
0.36
0.45
0.56
0.71
0.90
1.12
1.40
1.80
2.24
2.80
3.55
4.50
5.60
7.10
9.00
11.20
14.00
18.00
22.40
28.00
35.50
-
0.36
0.45
0.56
0.71
0.90
1.12
1.40
1.80
2.24
2.80
3.55
4.50
5.60
7.10
9.00
11.20
14.00
18.00
22.40
28.00
35.50
45.00
P1:
P2:
Q1:
Q2:
R1:
R2:
S1:
S2:
T1:
T2:
U1:
U2:
V1:
V2:
W1:
W2:
X1:
X2:
Y1:
Y2:
Z1:
Z2:
45
56
71
90
112
140
180
224
280
355
450
560
710
900
1120
1420
1800
2250
2800
3550
4500
5750
-
56
71
90
112
140
180
224
280
355
450
560
710
900
1120
1420
1800
2250
2800
3550
4500
5750
7100
Measured according to CIE 127. All SMD-LEDs are 100% measured and selected on full automated
equipment with an accuracy of ± 11 %.
Special service: Brightness selection in sub selections possible.
Color selection in 3 sub selections possible (each subgroup per reel).
© 2010
OSA Opto Light GmbH — Tel. +49-(0)30-65 76 26 83 — Fax +49-(0)30-65 76 26 81 — contact@osa-opto.com
preliminary edition 08/10
Tape And Reel Packing
D
180 mm
330 mm
Packing:
Parts/reel
2000
8000
The reel is sealed in special plastic bag with integrate ESD protection
( MIL - STD 81705 ) including a silica dry-pack
Label
Order No.
XXXXXXXXX
Type
OLS-330 ?????-??-T
Intensity group
ZZ
Charge No.
1122-AAAAAA
Quantity
9999
Customer order No.
Color class: CC
Color class - optional
11 Week – 22 year – A internal identification
Attention please:
The information describes the type of component and shall not considered as assured characteristics. Terms of
delivery and rights to change reserved. Due to technical requirements components may contain dangerous
substances. The data sheet may changed without prior information; the valid issue will be on our webpage in
internet. Parameters can vary in different applications. All operating parameters must be validated for each
customer application by the customer. OSA opto light does not have the responsibility for the reliability
and the degradation behaviour of products made with OSA opto light diodes because they depend not
only on the diode but also on the conditions of manufacture or design of the final products.
Packaging: Please use the recycling operators known to you.
Components used in life support devices or systems and safety systems must be expressly authorized for such
purpose!
© 2010
OSA Opto Light GmbH — Tel. +49-(0)30-65 76 26 83 — Fax +49-(0)30-65 76 26 81 — contact@osa-opto.com