TG/LTG-Series Rocker Switches The TG-Series Mini Tippette rocker switches are single or double pole and feature an all nylon double-insulated construction. These switches are designed with snap-in mounting for fast, low cost assembly. The illuminated version (LTG) is available with either a paddle or rocker actuator. These AC rated switches are also suitable for lowvoltage DC applications assuring compatibility for a wide range of markets including Appliance, HVAC, Food service, and Transportation. Carling Technologies, Inc. 60 Johnson Avenue • Plainville, CT 06062-1177 Phone: (860) 793-9281 • Fax: (860) 793-9231 Email: [email protected] • www.carlingtech.com 2 | TG/LTG-Series Rocker Switches Dielectric Strength Mechanical Life UL/CSA: 1000V - live to dead metal parts 100,000 cycles Operating Temperature Electrical Life 32°F to 185°F (0°C to 85°C) 50,000 cycles - maintained 25,000 cycles - momentary LTG G O 50 1 1 Base Part Number 2 Circuit 3 Center Position 4 Rating 5 Termination T B 6 Actuator Style B 7 Actuator Color 8 Base Color 6 ACTUATOR STYLE 1 BASE PART NUMBER: SERIES TG Double Pole, Non-Lighted LTG Double Pole with Indicator Lights P Paddle 7 ACTUATOR COLOR2 2 CIRCUIT1 See Circuit Designation Chart. B Black 8 BASE COLOR2 3 CENTER POSITION C Center OFF, Three position O No Center OFF, Two position B Black 9 LENS COLOR3 AAmber 4 RATING 40 5A 250VAC, 10A 125VAC, 1/2HP 125-250VAC 41 5A 250VAC, 10A 125VAC 50 10A 250VAC, 15A 125VAC, 3/4HP 125-250VAC 51 10A 250VAC, 15A 125VAC incandescent 6V 6 volt 12V 12 volt 18V 18 volt 24V 24 volt 28V 28 volt .156[3.96] DIA .375[9.52] .250[6.35] .210[5.33] .050[1.27] 1.240[31.50] Rocker W White W White RRed neon 125N 250N 125 volt neon 250 volt neon Notes: Imprinting is available. Consult factory. Panel Cut-Out Recommendations: For sheet metal panels, switch must enter panel in same direction as the punch. (Burr on bottom.) Test cut hole in actual material. 1 TG available with circuits A, B, C, D, E, F ; LTG available with circuits G, H, I, J, M, N, P, Q, R, T, U, V, Y, Z. 2 Custom colors are available. Consult factory. 3 Specify lens color for LTG-Series only. ( ) Indicates momentary function. .069[1.75] DIA 1.155[29.33] 10 Lamp Voltage T CClear 10 LAMP VOLTAGE 5 TERMINATION/FUNCTION Solder Lug .250 Tab QC .187 Tab QC Wire Leads On-None-Off 0 1 3 5 (On)-None-Off AB D F On-None-(Off) LM R T On-None-On 01 3 5 On-None-(On) AB D F On-Off-On 01 3 5 .865[21.97] R / 125 9 Lens Color .250[6.35] SOLDER LUG .250 TAB (Q.C.) .055[1.40] DIA 6.000[152.40] .250[6.35] .187[4.74] .187 TAB (Q.C.) TERMINAL TYPE .500[12.70] INTEGRATED WIRE LEAD (no exposed conductors) 1.125[28.57] .812[20.62] .520[13.20] 1.000[25.40] .375[9.52] .994[25.24] 1.120[28.45] PADDLE MOUNTING HOLE Panel Thickness: .030[.762] min. to .250[6.35] max. *Manufacturer reserves the right to change product specification without prior notice. 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: [email protected] • www.carlingtech.com Circuit Designation Chart | 3 1 1 4 1 2 2 2 5 2 5 2 5 3 3 3 6 3 6 3 6 B 4 2 C 4 5 3 D 4 2 2 3 3 1 E 4 1 2 2 6 4 3 3 6 I J 1 4 1 4 1 4 1 4 2 5 2 5 2 5 2 5 3 6 3 6 3 6 3 6 1 4 1 5 2 6 3 1 4 1 4 2 5 2 5 3 6 3 6 3 4 1 4 5 3 6 1 4 2 5 3 6 T 1 4 1 2 5 2 5 2 3 6 3 6 3 1 4 5 2 5 2 5 6 3 6 3 6 1 Z CONTACT TERMINAL Will make contact with switching lever CONTACT TERMINAL AND SWITCH LEVER ISOLATED TERMINAL BULB Does not make contact with switching lever REV_SW_TG/LTG_0912 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: [email protected] • www.carlingtech.com