LRG-Series Illuminated Double Pole Rocker & Paddle Switches The double pole lighted version of the R-Series incorporates the same sleek lines as the original Curvette, in a double pole envelope. This illuminated version features silver-plated butt-action contacts with ratings to 20A/125, 15A 250VAC and withstand peak inrush currents up to 100 amps. Clear or translucent style rocker actuators and a choice of solder lug, .250 Tab and wire lead terminations enable this switch to adapt to high current applications within the Power Supply, Appliance, Exercise Equipment and Music Equipment Industries. Carling Technologies, Inc. 60 Johnson Avenue • Plainville, CT 06062-1177 Phone: (860) 793-9281 • Fax: (860) 793-9231 Email: [email protected] • www.carlingtech.com 2 | LRG-Series Double Pole Rocker & Paddle Switches Dielectric Strength Mechanical Life UL/CSA: 1000V - live to dead metal parts & opposite polarity 100,000 cycles Operating Temperature -40°F to 185°F (-40°C to 85°C) Electrical Life 50,000 cycles LRGSCK611 R S 1 Base Part Number 2 Actuator Style 3 Actuator Color R C Rocker (translucent) 3 ACTUATOR COLOR 4 Bezel Color B 5 Rocker Legend NO LEGEND OFF-ON vertical OFF-ON horizontal I-O horizontal I-O vertical Dual OFF-ON, I-O vertical Dual OFF-ON, I-O horizontal Rocker (clear) White hot stamp 0 A B D E H J 6 LAMP VOLTAGE2 006V 012V 018V 6 Lamp Voltage W Black 5 ROCKER LEGEND L3 Lime Green PYellow R Red (clear) SRed W Pale Red AAmber B3,5Blue C4White/Clear G5Green B / 250N 4 BEZEL COLOR1 1 BASE PART NUMBER: SERIES/CIRCUITRY/RATING1/TERMINATION 15A 250 VAC, 20A 125 VAC, 3/4 HP 125-250 VAC Solder Lugs .250 Tabs Wire Leads Standard Base OFF-NONE-ON LRGSCK610 LRGSCK611 LRGSCK615 European Base (22 x 30 mm cutout) OFF-NONE-ON (Single Pole) LRGSEK610 LRGSEK611LRGSEK615 15A 6-24 V 3 Standard Base OFF-NONE-ON LRGSCK510 LRGSCK511 LRGSCK515 European Base (22 x 30 mm cutout) OFF-NONE-ON (Single Pole) LRGSEK510 LRGSEK511LRGSEK515 2 ACTUATOR STYLE B 024V 125N 250N 6V incandescent 12V incandescent 18V incandescent 24V incandescent 125V neon 250V neon Notes: 1 Additional ratings, colors and clear style actuators are available. Consult factory. 2 Incandescent lamps must specify 15A 24V rating only. 3 Available with incandescent lamps only. 4 Clear color provided where specified with clear style rocker. 5 Available with clear style rocker only. .125[3.18] X .150[3.81] .250[6.35] 1.145[29.08] .250 TA .080[2.03] 1.181[30.00] 1.180[29.97] RGSC RGSE *Manufacturer reserves the right to change product specification without prior notice. TEST CUT HOLE IN ACTUAL MATERIAL TEST CUT HOLE IN ACTUAL MATERIAL .872[22.15] 1.000[25.4] 1.072[27.23] .725[18.42] 1.070[27.17] WIRE LEAD 1.125[28.58] +.000[.00] -.004[.10] +.004[.10] -.000[.00] 1.176[29.87] SOLDER LUG TERMINAL TYPE .215[5.46] .866[22.00] .375[9.53] .500[12.70] .187[4.75] .C. .784[19.91] 1.240[31.50] 6.000[152.40] .275[6.99] LRGSE 1.086[27.58] LRGSC MOUNTING HOLE Panel Thickness: .025 min - .187 max. Specific cutout dimension range dependent on panel thickness and material. REV_SW_LRG_0912 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: [email protected] • www.carlingtech.com