LTA-Series Single Pole Lighted Rocker Switches The illuminated predecessor to the Curvette series whose versatility has allowed it to stand the test of time. Traditional styling coupled with self cleaning contacts, integrated wire leads, and various actuator choices has made the LTA-Series appeal to a wide range of markets including Appliance, HVAC, Food service, Transportation, and sundry other markets as well. Carling Technologies, Inc. 60 Johnson Avenue • Plainville, CT 06062-1177 Phone: (860) 793-9281 • Fax: (860) 793-9231 Email: [email protected] • www.carlingtech.com 2 | LTA-Series Single Pole Lighted Rocker Switches Dielectric Strength Mechanical Life UL/CSA: 1000V - live to dead metal parts 750V - across open contacts 100,000 cycles Operating Temperature 32°F to 185°F (0°C to 85°C) Electrical Life 100,000 cycles LTA201 P R 1 Base Part Number 2 Actuator Style 3 Actuator Color 2 ACTUATOR T P Rocker Paddle 2 ACTUATOR STYLE1 A C Amber Clear PS Short Paddle R G Red Green 2 4 Bezel Color/Style 5 Lens Color 6 Lamp Voltage 4 BEZEL COLOR1 1 BASE PART NUMBER: SERIES/CIRCUITRY/RATING1/TERMINATION 10A 250VAC; 15A 125VAC; 3/4 HP 125-250VAC Solder Lugs .250 Tabs .187 Tabs Wire Leads OFF-NONE-ONLTA200 LTA201 LTA203 LTA205 STYLE3 B -A 125N B Black 5 LENS COLOR2,3 / -A -C No Lens Amber Clear 6 LAMP VOLTAGE2 006V 6V incandescent 012V 12V incandescent 018V 18V incandescent W White -G -R -LU Green Red Blue 024V 24V incandescent 125N 125V neon 250N 250V neon Notes: 1 Additional ratings and colors are available. Consult factory for details. 2 Neon lamps not recommended with green or blue rocker/lenses. 3 Lens color is specified only if actuator style is P or PS. If style is T (rocker), then use / as the code in position 5. .069[1.75] DIA .050[1.27] .250[6.35] .250[6.35] .390[9.77] .250 TAB (Q.C.) .055[1.40] DIA .156[3.96] DIA .375[9.52] .250[6.35] SOLDER LUG 6.000[152.40] .250[6.35] .500[12.70] .187[4.74] .187 TAB (Q.C.) INTEGRATED WIRE LEAD (no exposed conductors) TERMINAL TYPE .550[13.97] .860[21.84] .375[9.52] .520 [13.20] .544[13.81] 1.125[28.57] .275[6.98] .890[22.60] 1.120[28.44] PADDLE *Manufacturer reserves the right to change product specification without prior notice. SHORT PADDLE MOUNTING HOLE Panel Thickness: .020[.508] min. to .250[6.35] max. REV_SW_LTA_0912 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: [email protected] • www.carlingtech.com