P-Series Pushbutton Switches These rugged pushbutton-type switches feature international approvals, ratings to 20A 125VAC and a heavy actuation force (3-5 lbs. typical) which makes this switch ideal for use as a “foot-pedal” switch. These switches have become mainstays for canister Vacuum Cleaner applications. The metal bushing and plunger construction enables this alternate action switch to withstand the rigors of most any stringent pushbutton application. Carling Technologies, Inc. 60 Johnson Avenue • Plainville, CT 06062-1177 Phone: (860) 793-9281 • Fax: (860) 793-9231 Email: [email protected] • www.carlingtech.com 2 | P-Series Pushbutton Switches Dielectric Strength Electrical Life UL/CSA: 1000 - live to dead metal parts & opposite polarity TUV: 4000V - live to dead metal parts; 1250V - opposite polarity across open contacts 50,000 cycles Mechanical Life 100,000 cycles Operating Temperature 0°F to 85°F (32°C to 85°C) PA341 1 Part Number 1 PART NUMBER: SERIES/ACTUATOR/CIRCUITRY/RATING/TERMINATION .250 Tab Screw Terms. 10A 250VAC, 15A 125VAC, 3/4 HP 120-240 VAC1 On-Off PA341 PA344 On-On PB341 PB344 1 10A 250VAC, 20A 125VAC, 1 1/2 HP 120-240 VAC On-Off PA301 PA304 On-On PB301 PB304 2 10A 250VAC, 15A 125VAC, 10(6)a 250 VACu, T85 On-Off PA951 PA954 Wire Leads PA345 PB345 PA305 PB305 PA955 Notes: 1 Additional ratings available. Consult factory. 2 UL, CSA & TUV approved. .075[1.90] DIA 15/32-32UNS-2A THREAD .283[7.18] #6-32NC-2 THREAD .365[9.27] .317[8.05] DIA 6.000[152.4] .270[6.86] .250[6.35] KEYWAY .072[1.82] X .038[.965] DP SCREW (ASSEMBLED) .250 TAB (Q.C.) .500[12.70] INTEGRATED WIRE LEAD (no exposed conductors) TERMINAL TYPE .562[14.27] .500[12.70] DIA .982[24.94] .062[1.57] .038[.965] MOUNTING HOLE 1.125[28.58] .398[10.11] *Manufacturer reserves the right to change product specification without prior notice. .500[12.70] DIA WITH KEYWAY .602[15.29] REV_SW_P_0912 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: [email protected] • www.carlingtech.com