Rocker Switches LRGSC-Series The LRGSC-Series Super Curvette rocker switches offer double pole circuitry in an illuminated package. These switches can handle up to 125 amp peak inrush current and can accommodate a wide range of panel cutouts due to the patented mounting ear construction. International ratings are available up to 20 amps. Specifications •Certifications*: UL, CSA, VDE •Dielectric Strength: 1,000 V (minimum) •Insulation Resistance: 100 Megohms (minimum) •Base Material: Nylon •ActuatorMaterial: Nylon/Polycarbonate * Due to ongoing technological advances, consult factory for certification specifics. .125[3.18] X .150[3.81] Dimensional Specifications: in. [mm] 6.000[152.40] .275[6.99] .250[6.35] .250 TAB (Q.C.) 1.145[29.08] 1.240[31.50] .500[12.70] .187[4.75] SOLDER LUG TERMINAL TYPE .784[19.91] 1.181[30.00] .215[5.46] .080[2.03] 1.125[28.58] +.000[.00] -.004[.10] +.004[.10] -.000[.00] .866[22.00] .725[18.42] TEST CUT HOLE IN ACTUAL MATERIAL .872[22.15] 1.180[29.97] LRGSE 1.070[27.17] LRGSC LRGSE LRGSC K TEST CUT HOLE IN ACTUAL MATERIAL 1.000[25.4] 1.072[27.23] 3.75[9.53] 1.176[29.87] WIRE LEAD LRGSC MOUNTING HOLE Panel Thickness: .025 min. - .187 max. Specific cutout dimension range dependent on panel thickness and material. 1.086[27.58] 71 1 - R - S - B - 0 / 250N SERIES RATING1 ACTUATOR STYLE BASE COLOR2 LAMP VOLTAGE LRGSC STANDARD BASE LRGSE EUROPEAN BASE 22 15A 250VAC 20A 125VAC 16(6)A 125VAC T85 51 LOW VOLTAGE FOR 6, 12, 18 & 24 VOLT LAMPS 61 15A 250VAC 20A 125VAC 71 15A 250VAC 20A 125VAC 16(6)A 250VAC T85 R B BLACK W WHITE 006V 6 VOLTS/ INCANDESCENT5 012V 12 VOLTS/ INCANDESCENT5 018V 18 VOLTS/ INCANDESCENT5 024V 24 VOLTS/ INCANDESCENT5 125N 125 VOLTS/ NEON 250N 250 VOLTS/ NEON CIRCUIT K OFF-NONE-ON DOUBLE POLE TERMINATION 0 1 5 SOLDER LUG .250TAB (QC) WIRE LEAD C TRANSLUCENT ROCKER CLEAR ROCKER COLOR TRANSLUCENT A APRICOT (amber) C COCONUT (white) L LIME (green) S STRAWBERRY (red) W WATERMELON (pale red) CLEAR A AMBER B BLUE3 C CLEAR G GREEN R RED ROCKER FACE IMPRINTED LEGEND4 0 NO LEGEND A OFF-ON (VERTICAL) B OFF-ON (HORIZONTAL) D O-I (HORIZONTAL) E O-I (VERTICAL) F ON-OFF (VERTICAL) G ON-OFF (HORIZONTAL) NOTES: Shading indicates standard configurations. Panel Cut-Out Recommendations: For sheet metal panels, switch must enter panel in same direction as the punch. (Burr on bottom.) Test cut hole in actual material. 1 Rating Code 22 must use 125V neon lamp. Rating code 71 must use 250V neon lamp. 2 Custom colors are available. Consult factory. 3 Not available with 125VAC, 250VAC neon lamp. 4 White is standard with dark actuators; black is standard with light actuators. 5 Incandescent lamps must specify rating code 51. 30 Carlingswitch,Inc. (860) 793-9281• Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277