Rocker Switches TIL, TIG, TIH, TII-Series The TI-Series Tippette rocker switches are available in single pole (TIL), double pole (TIG), three pole (TIH) and four pole (TII) versions. These switches are available with nylon snap-in or screwtype mounting brackets, are AC rated to 20 amps and suitable for low voltage DC applications. Multiple actuator options and colors are available, and many circuits have international approvals. Specifications •Certifications*: UL, CSA, and VDE •Dielectric Strength: 1,000 V (minimum) •Insulation Resistance: 100 Megohms (minimum) •Base Material: Phenolic •Actuator Material: Nylon •Bracket/Bezel Material: Nylon or Steel * Due to ongoing technological advances, consult factory for certification specifics. Dimensional Specifications: in. [mm] 1.348[34.24] 1.306[33.17] 1.034[26.26] .762[19.35] .345[8.76] .422[10.72] 1.350[34.29] 1.088[27.63] TIL TIG SERIES TIG K 5 - 1 TIH - 6S CIRCUIT RATING SINGLE POLE A ON-NONE-OFF B ON-NONE-ON C ON-OFF-ON 5 1 SINGLE POLE DOUBLE POLE THREE POLE FOUR POLE panel in same direction as the punch. (Burr on bottom.) Test cut hole in actual material. 1 Horsepower rating for code 5 is applicable to certain circuits only. Consult factory for specifics. Rating Code 9 for TIG-Series only with maintained A, B, K, L and M Circuits, and N Bracket Style, terminals 0 or 1 only. Rating Code 72 for TIG-Series only, in maintained circuits, with N or W Bracket Style only. 2 For double actuator with or without interlock or other actuator styles,consult factory. Imprinting available on smooth face rockers. 3 Glossy finish is standard. Custom colors are available. Consult factory. 4 Barbs are available on FN style bracket to accommodate panel thicknesses of .062, .100, .125, .156 and .250. Specify after bracket selection. (ex.) FN/.125 MBL, NBL & WBL brackets are molded in black. If white is desired, specify as MWH, NWH & WWH. Bracket Styles D, E and G available. Consult factory. Bracket Style M consists of LNP rocker, neoprene seal, syntech grease, dummy rivets. M, N and W brackets supplied in two pole bases. MBL does not have UL, CSA approvals. Bracket style H available with actuator styles 7N and 7P only. 5 Actuator & Bracket Finish is a matched set. 40 BL - NBL ACTUATOR STYLE ACTUATOR COLOR3 1C CROSS SERRATED 1F SMOOTH W/ FLATTED CENTER 1L LONG LINED 1S SMOOTH ANGLED 2L LONG NARROW SMOOTH 6M5 MATTE CURVED (M, N OR W BRACKETS ONLY) 6S SMOOTH CURVED (M, N OR W BRACKETS ONLY) 7N WITCHES HAT (NARROW) 7P WITCHES HAT 7S TOGGLE BL BLACK WH WHITE 2 10A 250VAC 15A 125VAC 3/4HP 125-250VAC 6 3A 250VAC 6A 125VAC DOUBLE, THREE OR 1/4HP 125-250VAC FOUR POLE 9 10A 250VAC K ON-NONE-OFF 15A 125VAC L ON-NONE-ON 12(6)A 250VAC T85 M ON-OFF-ON NOTES: 72 20A 125-277VAC Shading indicates standard configurations. 1 1/2HP 125VAC Dust covers for single and double pole are available, consult factory. Panel Cut-Out Recommendations: For sheet metal panels, switch must enter 2HP 250VAC TIL TIG TIH TII .760[19.30] .305[7.75] .750[19.05] .601[15.26] BRACKET STYLE4 A B C H FN FW MBL NBL WBL NARROW WIDE MARINE WATERSHEDDING TERMINATION/FUNCTION FUNCTION ON-NONE-OFF (ON)-NONE-OFF ON-NONE-(OFF) ON-NONE-ON ON-NONE-(ON) ON-OFF-ON ON-OFF-(ON) (ON)-OFF-(ON) SOLDER LUG 0 A L 0 A 0 A L .250 TAB (QC) 1 B M 1 B 1 B M .187 TAB (QC) 3 D R 3 D 3 D R SCREW TERM. 4 E S 4 E 4 E S WIRE LEAD 5 F T 5 F 5 F T PC TERM. 6 G U 6 G 6 G U Carlingswitch,Inc. (860) 793-9281• Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277 Rocker Switches Special Circuits for Tippette Rocker Switches CIRCUIT POSITION 1 PROGRESSIVE TWO CIRCUIT GG BOTH CIRCUITS ON GG BOTH CIRCUITS (ON) POSITION 2 POSITION 3 ONE CIRCUIT ON ONE CIRCUIT ON OFF OFF ON ON BOTH CIRCUITS ON CIRCUIT 1 ON CIRCUIT 2 ON OFF SINGLE POLE TRIPLE THROW GE ON TWO CIRCUIT GH GP CIRCUIT 1 ON CIRCUIT 2 ON REVERSING DOUBLE POLE DOUBLE THROW GO ON OFF GX ON NONE ON ON .075[1.91] DIA .125[3.18] DIA .330[8.38] .187[4.74] .055[1.40] DIA .437[11.09] .394[10.00] .250[6.35] .187[4.74] SOLDER LUG .250 TAB (Q.C.) 1.892[48.05] .187 TAB (Q.C.) TERMINAL TYPE #6-32NC-2 THREAD 1.134[28.80] .187[4.75] 6.000[152.40] .141[3.58] .370[9.39] .422[10.72] .187[4.75] .500[12.70] .286[7.26] SCREW (ASSEMBLED) 1.302[33.07] 1.436[36.47] .350[8.89] PRINTED CIRCUIT WIRE LEAD TII Actuator Styles/Dimensions: in. [mm] .650[16.51] 1.224[31.08] .957[24.30] .650[16.51] 1.224[31.08] .957[24.30] .650[16.51] 1.224[31.08] .957[24.30] 1L 1C 1S TIL,TIG,TIH,TII TIL,TIG,TIH,TII TIL,TIG,TIH,TII .312[7.92] .957[24.30] 1.224[31.08] 1.224[31.08] .650[16.51] .957[24.30] 1.024[26.00] .300[7.62] 1F 2L TIG, TII TIL,TIG,TIH,TII 1.224[31.08] 6S TIG .630[16.00] .430[10.90] .650[16.51] .250[6.35] 1.035[26.28] .996[25.30] 1.224[31.08] .880[22.40] 7S TIG NOTES: Additional momentary circuits are available. Consult factory for details. .880[22.4] 7N 7P TIG TIG Carlingswitch,Inc. (860) 793-9281• Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277 41 Rocker Switches Bracket Dimensions: in. [mm] 1.190[30.22] # 6-32NC-2 TAP .680[17.27] .156[3.96] DIA .070[1.77] .830[21.08] 55° 4 plcs* .158[4.01] DIA 1.450[36.83] TAPPED HOLE CLEARANCE HOLE MOUNTING HOLE Standard with A & B Brackets Standard with C Bracket (Nylon Snap-in Brackets) Panel Thickness: .030 min. - .250 max. * Angled corners are suggested for optimum fit. Standard rectangular cutout is acceptable. 1.940[49.27] 1.940[49.27] .078[1.98] 1.892[48.06] .078[1.98] 1.960[49.78] .078[1.98] .078[1.98] 1.625[41.27] 1.625[41.27] A A A A TIL TIG TII TIH 2.093[53.16] 1.625[41.27] 1.625[41.27] 2.090[53.08] .156[3.96] .156[3.96] 1.625[41.27] 1.625[41.27] B B TIL TII, TIG 1.875[47.62] 1.940[49.27] 2.062[52.37] .426[10.82] .426[10.82] .520[13.21] 1.625[41.27] 1.625[41.27] 1.625[41.27] C* C C TIL TIG TIH, TII 1.950[49.53] 1.700[43.18] GCP 1.350[34.29] GLOSS FINISH .960[24.38] 1.625[41.27] GMP MATTE FINISH HOLE PLUG FOR TIL, TIG, TIH & TII 1.570[39.88] H .430[10.92] TIG NARROW WIDE 1.126[28.60] .900[22.86] MARINE / STD / WATERSHEDDING 1.750[44.45] 1.570[39.87] 1.700[43.18] .960[24.38] FN FW MBL, NBL, WBL TIL, TIG, TIH, TII METAL, SNAP-IN TIL, TIG, TIH, TII METAL, SNAP-IN TIG BLACK NYLON, SNAP-IN NOTES Double brackets supplied on TII-Series when B style bracket is specified. Consult factory for dimensional information. * Available in both clearance and tapped hole options. Please specify when ordering. 42 Carlingswitch,Inc. (860) 793-9281• Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277