ALUMINUM ELECTROLYTIC CAPACITORS KZ Premium Grade Type, For Audio Equipment series Premium grade “nichicon MUSE” acoustic series. Ideally suited for first class audio equipment where qualitative and quantitative comfortableness is required. Compliant to the RoHS directive (2002/95/EC). KZ High Grade FG Specifications Performance Characteristics Item Category Temperature Range – 40 to +85°C Rated Voltage Range 25 to 100V Rated Capacitance Range 10 to 1000µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 1 minute's application of rated voltage, leakage current is 0.01CV or less. Measurement frequency : 120Hz, Temperature : 20°C Tangent of loss angle (tan δ) 25 0.12 Rated voltage (V) tan δ (MAX.) 50 0.08 100 0.07 Measurement frequency : 120Hz 25 2 4 Rated voltage (V) Impedance ratio Z– 25°C / Z+20°C ZT / Z20 (MAX.) Z– 40°C / Z+20°C Stability at Low Temperature 50 2 3 100 2 3 The specifications listed at right shall be met Capacitance change Within ±20% of the initial capacitance value when the capacitors are restored to 20°C after tan δ 150% or less than the initial specified value the rated voltage is applied for 1000 hours at Less than or equal to the initial specified value Leakage Current 85°C. After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with gold color letter on black sleeve. Endurance Shelf Life Marking Type numbering system (Example : 25V 100µF) Radial Lead Type φ 0.8 tinned copper wire Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 P ± 0.5 φD+0.5MAX. UK Z 1 E 1 0 1 M PM Configuration Capacitance tolerance (±20%) Rated capacitance (100µF) Pressure relief vent φD 8 · 10 12.5 to 18 Code PM HM Rated voltage (25V) L+ MAX. 15MIN 4MIN Series name (mm) α (φ D < 10) 1.0 (φ D 10) 1.5 φD 8 10 12.5 16 18 P 3.5 5.0 5.0 7.5 7.5 Type • Please refer to page 20 about the end seal configulation. Dimensions Cap.(µF) 10 22 33 47 1000 2200 3300 4700 100000 φ D × L (mm) V Code 100 220 330 470 101 221 331 471 102 25 1E 8 × 11.5 10 × 12.5 10 × 16 12.5 × 20 12.5 × 25 16 × 25 16 × 35.5 50 1H 8 × 11.5 10 × 12.5 10 × 16 12.5 × 20 16 × 25 16 × 31.5 16 × 35.5 18 × 40 100 2A 8 × 11.5 10 × 16 10 × 20 12.5 × 20 16 × 25 16 × 35.5 18 × 35.5 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100Z