ELECTRIC DOUBLE LAYER CAPACITORS "EVerCAP " UK Radial Lead Type, Lower Resistance series UM Lower resistance type of UM series. Suited for Smart Meters. Lower temperature range (– 40 to +70°C). Adapted to the RoHS directive (2002/95/EC). Lower resistance UK Specifications Item Performance Characteristics Category Temperature Range – 40 to +70°C Rated Voltage 2.5V Rated Capacitance Range 6.8 to 27F See Note Capacitance Tolerance ± 20% , 20°C Leakage Current 0.5C (mA) [ C : Rated Capacitance(F)] (After 30 minutes' application of rated voltage, 2.5V) Stability at Low Temperature Capacitance (– 40°C) / Capacitance (+20°C) ×100 ESR, DCR* Refer to the list below (20°C). *DC internal resistance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 70°C. Capacitance change Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after storing the capacitors under no load for 1000 hours at 70°C. Capacitance change Shelf Life Marking Printed with white color letter on black sleeve. Drawing ESR Leakage current ESR Leakage current Within ±30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value Within ±30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value Type numbering system (Example : 2.5V 6.8F) (P.E.T. (P.E.T. ) ) Sleeve Sleeve Sleeve (P.E.T.) φd φd 1 φd 15MIN 54 5 6 76 87 8 9 10 9 11 10 11 4MIN 4MIN 4MIN (mm)(mm) φD φD12.512.516 16 18(mm) 18 Configuration Configuration Configuration Pb-free lead lead finishing finishing φ D φ D Pb-free Pb-free Pb-free PET PET sleeve sleeve Pb-free lead finishing φ D 12.5 to 12.5 18to 18 Pb-free HDPET HDsleeve 12.5 P φDP 5.0 5.07.516 7.57.518 7.5 φd Pφd0.85.0 0.80.87.5 0.80.87.5 0.8 φd 0.8 0.8 0.8 12.5 to 18 Dimensions Rated Rated Rated Rated Voltage Voltage Capacitance Capacitance Rated Rated Voltage ( Code ( Code ) ) (F) (F) Capacitance ( Code ) (F) 6.8 6.8 2.5V2.5V 126.8 12 2.5V (0E) (0E) 1812 18 (0E) 2718 27 27 3 4 P0.5 0.5 P P0.5 15MIN15MIN L+2.0 MAX. 21 32 J 1UJ 2K U 3K 0 4E0 5E 6 686 758 8M 5 9H M10D H11D J UK 0 E 6 8 5 MHD φD+0.5MAX φD+0.5MAX φD+0.5MAX Pressure Pressure relief vent relief vent Pressure +2.0 MAX. relief vent L+2.0 LMAX. 70% Code Code Code 685685 685 126 126 126 186 186 186 276 276 276 ESRESR DCR DCR (Ω) (Ω) ESR Typical (Ω) (Ω) DCR (at 1kHz) (at(Ω) 1kHz)Typical (at 1kHz) Typical (Ω) 0.075 0.075 0.085 0.085 0.075 0.085 0.060 0.060 0.065 0.065 0.060 0.065 0.055 0.055 0.055 0.055 0.055 0.055 0.040 0.040 0.035 0.035 0.040 0.035 The listed DCR value is typical and therefore not a guaranteed value. Case Case sizesize × Lsize Case φ D φ× D L (mm) (mm) φ D × L (mm) × 31.5 × 31.5 12.512.5 ××31.5 12.5 ×16 16 31.5 31.5 ××31.5 ×18 1816 31.5 31.5 ××31.5 ×18 1818 40 40 18 × 40 Configuration Configuration Configuration Capacitance tolerance (±20%) Capacitance tolerance (±20%) Capacitance tolerance (±20%) Rated capacitance (6.8 F) Rated capacitance (6.8 F) Rated capacitance (6.8 F) Rated voltage (2.5V) Rated voltage (2.5V) Rated voltage (2.5V) Series name Series name Series name TypeType Type HD Note : The capacitance calculated from discharge time (ΔT) with constant current ( i ) after 30minute charge with rated voltage (2.5V). The discharge current ( i ) is 0.01 × rated capacitance (F). The discharge time (ΔT) measured between 2V and 1V with constant current. The capacitance calculated bellow. Capacitance (F) = i × ΔT 2012.G