Nichicon Power Supply and Lighting Applications Catalog Production By Country Snap-in terminal type Screw terminal type Miniature aluminum Chip-type aluminum Electrical double Conductive polymer aluminum electrolytic aluminum electrolytic electrolytic capacitors electrolytic capacitors layer capacitors aluminum solid electrolytic capacitors capacitors capacitors ● ● ● ● ● ● ● ● ● ● ● ● ● ● Japan China Malaysia 2014.10 Film capacitors ● Note: Please confirm when ordering because some series, sizes and specs are not being produced. Standard Process for Custom Product Development We offer products optimized to meet our customers’ application, size and other design needs. Customer Nichicon Product development Planning Acceptance application Circuit design Request for quote Demonstration testing Evaluation and approval Spec registration Ordering decision Agreement Customer inquiry Visit Customer proposal Sample order Sample delivery Mass production order Inquiry Design Product proposal Receipt of sample order/production Price quote Sample shipment Production of delivery specification Order receipt Mass production Handled by technical departments at our plants Handled by technical departments at our plants, and our sales bases Handled by technical departments at our plants, QC department, and our sales bases Handled by our sales bases Handled by production divisions at our plants and our sales bases Power Supply and Lighting Applications CAUTION FOR SAFETY NOTE • PRIOR TO ORDERING A PRODUCT, PLEASE OBTAIN A COPY OF SPECIFICATION FROM NICHICON AND USE THE SPECIFICATION AS A BASIS WHEN DESIGNING EQUIPMENT AND INCORPORATING OUR PRODUCT. NICHICON ADMITS NO LIABILITY FOR EQUIPMENT PROBLEMS DUE TO THE LACK OF PRODUCT SPECIFICATIONS BEING CONFIRMED. • SPECIFICATION AND DIMENSIONS IN THIS CATALOG ARE SUBJECT TO CHANGE WITHOUT NOTICE. IF NECESSARY, DRAWINGS CAN BE PROVIDED. • OTHER THAN THE EXPRESS WRITTEN SPECIFICATIONS CONTAINED IN NICHICON'S CATALOG OR OTHER NICHICON LITERATURE. NICHICON MAKES NO WARRANTY, EXPRESS, IMPLIED, OR OTHERWISE, INCONNECTION WITH THESE PRODUCTS, AND ALL IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PRODUCT, ARE DISCLAIMED. NICHICON SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. CUSTOMER'S SOLE REMEDY IN THE EVENT THAT NICHICON'S SPECIFICATIONS ARE NOT MET IS TO REPAIR, REPLACE, OR REFUND THE PURCHASE PRICE OF THE SUBJECT PRODUCT, AT NICHICON'S OPTION. • CATALOG PRINTED IN OCT. 1, 2014 CAT.8104 B2014.J Switching power source circuit Series recommended for lighting or various power sources ON/OFF rectification in-rush prevention Long life LGR LGY 1 Rectification 1 System diagram of series recommended for primary power sources LAR UCY Hi ULD gh LKS UUL Chip-form LKX UKA UCB UHV Conductivity UUQ UCM quality dio au Miniature LAQ Miniature Permissible abnormal voltage Permissible voltage LEAD TYPE Low profile LGW LGN Higher ripple current Longer life LGX Smaller UPZ LGJ Longer life LGR UCS UPH Longer life UCP LEAD TYPE Low profile UCS Products for pencil applications Smaller UCY LEAD TYPE LEAD TYPE LEAD TYPE Longer life LEAD TYPE ULD LEAD TYPE Smaller LGG Smaller LGL 2 System diagram of series recommended for secondary power sources PCJ UHE Chip-type Miniature Low imp ed an ce PCK UUD UZG UVC RL8 UZG LGG UUL CHIP TYPE Longer life CHIP TYPE UCB UPW CHIP TYPE UMV UWT UPA CHIP TYPE UUD CHIP TYPE UAS UCD CHIP TYPE UCL CHIP TYPE UCM ty LGJ(15) ci CHIP TYPE ca pa UAQ gh Conductivity hi M LAR in ia Higher capacitance PCG High voltage Longer life H i g h ri pp le cu rren t Nichicon Power Supply and Lighting Applications Catalog Perm ble issi ab n or l ma vo lta LEAD TYPE Standard product RNS RR7 ESR 7mΩ product RR5 LEAD TYPE LEAD TYPE LEAD TYPE Lower ESR Higher capacitance Longer life PCF PCV PCX Higher capacitance Lower ESR Lower ESR ESR 5mΩ product Low profile RL8 Low profile RNU High-capacity product Low ESR product (φ8) RE5 LEAD TYPE LEAD TYPE LEAD TYPE Lower ESR ESR 5mΩ product Higher capacitance RNE High-capacity product Low ESL/ high-capacity product LEAD TYPE RS8 LEAD TYPE Higher capacitance LGW ge UHW Conductivity Higher capacitance PCS re tu LAQ LEAD TYPE Lower impedance Higher capacitance UCA Longer life Lower impedance Lower impedance UCP UHV LEAD TYPE USV UCS Lower impedance Longer life UCD UPW UHE LEAD TYPE Lower impedance Low profile LGL UPA Longer life LEAD TYPE RS8 UCL UHW LGJ 01 2 Input filter Snap-in terminal type Snap-in terminal type Main SW Higher capacitance Miniature high-capacity product RS6 Low ESL/ high-capacity product LEAD TYPE RF8 LEAD TYPE Product capable of withstanding high temperatures RHT Guaranteed to 125°C LEAD TYPE Higher temperature PCJ Lower ESR PCK Nichicon Power Supply and Lighting Applications Catalog 02 Nichicon Power Supply and Lighting Applications Catalog Nichicon Power Supply and Lighting Applications Catalog [Supports] Long-life [Supports] Miniature high capacity LED lighting fixtures These capacitors can double* the lifespan of LED lighting. Refrigerators, televisions We offer a variety of low-profile products. * Reflects only the lifespan of the LED lighting fixture capacitor Compared to earlier product ULD UCY Twice the lifespan Comparison example 105°C 20,000h 105°C 10,000h 400V 6.8µF (ø10×16L) LGR Product size Endurance Rated Voltage Capacitance UCY Product size Endurance Rated Voltage Capacitance UUL Product size Endurance Rated Voltage Capacitance Spec comparison Spec comparison Snap-in terminal type 105°C long-life product ●Optimal for power source circuits requiring high reliability ●Products with rated ripple current application guaranteed for 10,000 hours ø22×25L to ø35×50L 10,000 hours at 105°C 200 to 450V 39 to 1,500μF Miniature high ripple current long-life product ●Supports high ripple current ●Products with rated ripple current application guaranteed for 12,000 hours (Some products 10,000 hours) ø10×16L to ø18×46L 12,000 hours at 105°C (For 20L or less or 500V rating:10,000 hours) 160 to 500V 6.8 to 680μF Chip-type long-life product ●Surface-mounted long-life product ●Applicable to automatic mounting machine fed with carrier tape ø4×5.8L to ø10×10L 5,000 hours at 105°C 6.3 to 50V 0.1 to 1,000μF Lifespan Size LGN LGX LGR 3,000 hours ø30×35 5,000 hours ø30×35 10,000 hours ø30×50 LGY Product size Endurance Rated Voltage Capacitance Endurance Rated Voltage Capacitance Snap-in terminal type 105°C long-life product ●Optimal for power source circuits on industrial equipment requiring high reliability ●Products with rated ripple current application guaranteed for 5,000 hours ø22×25L to ø35×50L 5,000 hours at 105°C 16 to 100V 560 to 47,000μF Miniature long-life product ●Products with rated ripple current application guaranteed for 20,000 hours (Some products 10,000 hours, 12,000 hours, 15,000 hours) ø5×11L to ø18×31.5L 20,000 hours at 105°C (ø6.3×11L, ø8×9L, ø10×9L:12,000 hours, ø8×11.5L, ø10×12.5L:15,000 hours), (10 to 100V:10,000 hours) 10 to 450V 1 to 330μF UCB Product size Endurance Rated Voltage Capacitance Chip-type long-life product ●Surface-mounted long-life product ●Applicable to automatic mounting machine fed with carrier tape Audio equipment We combine newly developed audio environment materials with the characteristic power of our products to achieve excellently balanced, powerful sound. LKX ●Effective in improving audio quality by replacing the general miniature product ●Careful selection of high-audio-quality parts Product size Endurance Rated Voltage Capacitance UKA ø20×25L to ø35×50L 1,000 hours at 85°C 25 to 100V 680 to 33,000μF High-grade product over a broad range of temperatures for audio equipment UUQ ●High-grade audio product supporting 105 °C ●Careful selection of high-audio-quality parts Product size Endurance Rated Voltage Capacitance 03 ø5×11L to ø18×40L 2,000 hours at 105°C 6.3 to 50V 22 to 22,000μF Nichicon Power Supply and Lighting Applications Catalog 21mm 20mm (20+1+0) (15+2+3) VENT VENT VENT Earlier product VENT Characteristics ø30×20L ø20×35L ø35×15L 16 to 450 160 to 450 200 to 400 160 to 400 Rated capacitance range (µF) 47 to 47,000 47 to 680 68 to 1,200 39 to 390 Endurance 105°C 3,000h 105°C 3,000h 105°C 2,000h 105°C 2,000h 20・22・25・30・35 20・22・25・30・35 20・22・25 20・22・25・30・35 25 to 50 20 30 to 50 15 øD (+1max.) (tolerance) L (±2) LGG Snap-in terminal type 105°C ultra-miniature product ø22×25L to ø35×50L 2,000 hours at 105°C 160 to 450V 100 to 3,300μF Snap-in terminal type 105°C thin product Product size Endurance Rated Voltage Capacitance UVC ø20×20L to ø35×20L 3,000 hours at 105°C 200 to 450V 47 to 680μF Ultra-miniature product for use in adaptors ø20×25L to ø35×50L 2,000 hours at 105°C 200 to 450V 56 to 2,200μF Audio-use chip product for a broad range of temperatures USV ø4×5.4L to ø10×10L 1,000 hours at 105°C 6.3 to 50V 0.1 to 1,000μF ø8×11.5L to ø10×20L 2,000 hours at 105°C 400V 4.7 to 18μF 7mmL long-life product ø4×7L to ø8×7L 5,000 hours at 105°C 6.3 to 50V 0.1 to 220μF Three ø25×12.5L are used Height 12.5mm Snap-in terminal type 105°C ultra-miniature product ●LGG Series miniaturized product ●Long-life products with rated ripple current application guaranteed for 2,000 hours Product size Endurance Rated Voltage Capacitance ø22×25L to ø35×50L 8,000 hours at 105°C 400 to 450V 120 to 1,000μF LGJ (15) Snap-in terminal type 105°C thin product (15mmL) ●Optimal for making power sources lower profile ●Products with rated ripple current application guaranteed for 2,000 hours Product size Endurance Rated Voltage Capacitance UMV ø20×15L to ø35×15L 2,000 hours at 105°C 160 to 400V 39 to 390μF 5mmL long-life product ●height 5mmL ●Guaranteed for 5,000 hours at 105°C Product size Endurance Rated Voltage Capacitance UZG ●height 7mmL ●Guaranteed for 5,000 hours at 105°C Product size Endurance Rated Voltage Capacitance Low profile Height 18mm LGL For audio equipment switching power sources Product size Endurance Rated Voltage Capacitance Height 10mm A single ø18×31.5L is used ●Contributes to product miniaturization ●Products with rated ripple current application guaranteed for 2,000 hours Product size Endurance Rated Voltage Capacitance Two ø10×50L are used Height 18mm 105°C standard product 20mm low-back product Sideways-oriented product 15mm low-back product Rated voltage range (V) Size range Low profile A single ø18×31.5L is used ø25×25L New product The height of the product is limited by slimming. (Rating example) ●Surface-mounted audio product for a broad range of temperatures ●Applicable to automatic mounting machine fed with carrier tape. Product size Endurance Rated Voltage Capacitance Slimmed standard product standard product Sideways-oriented Ultra- low-back product LGU LGJ product LGJ(15) Series name ●Ultra-miniature product for use in adaptors ●Effective in improving audio quality by replacing the 105°C standard product ●Careful selection of high-audio-quality parts Product size Endurance Rated Voltage Capacitance 25mm (20+2+3) ●Optimal for making power sources lower profile ●Products with rated ripple current application guaranteed for 3,000 hours [Supports] High audio quality Miniature product for audio equipment power source smoothing 30mm (25+2+3) LGJ ø4×7L to ø10×10L 7,000 hours at 105°C 6.3 to 50V 0.1 to 1,000μF Nichicon Power Supply and Lighting Applications Catalog LKS Board mounting height (Nominal+tolerance+valve space) 400V 100µF ULD Product size Rating Voltage:400V Capacitance:330μF Supports low profile ø4×5L to ø6.3×5L 5,000 hours at 105°C 4 to 50V 0.1 to 100μF Chip 3.95mmL MAX broad-temperature-range-product ●Surface-mounted product, height 3.95mmL MAX, broad-temperature-range product ●Applicable to automatic mounting machine fed with carrier tape Product size Endurance Rated Voltage Capacitance ø4×3.9L to ø6.3×3.9L 1,000 hours at 105°C 6.3 to 50V 0.1 to 100μF Nichicon Power Supply and Lighting Applications Catalog 04 Nichicon Power Supply and Lighting Applications Catalog Nichicon Power Supply and Lighting Applications Catalog [Supports] Permissible abnormal voltage Printers, FAX machines Reduces risk and increases safety when application of overvoltage is anticipated, such as in locations overseas where voltage is unstable. LAQ LAR Snap-in terminal type Miniature product supporting overvoltage at 105°C ●Optimal in products used in areas where power sources are unstable ●Products with rated ripple current application guaranteed for 2,000 hours Product size Endurance Rated Voltage Capacitance Safety function UAS Safety function Minature product supporting abnormal voltage for use in a high temperature range Test conditions (LAQ) 200 220 ø10×9L to ø18×40L 2,000 hours at 105°C 200 to 400V 4.7 to 330μF In the tests shown at right, the pressure valve operated normally, metal parts did not fly off, and there were no shorts or fires. Safety function UAQ 400 Less than 330 4A 330 to 469 5A 470 + 7A Less than 330 4A 330 to 469 5A 470 + 7A Less than 100 2A 100 to 219 4A 220 + 7A Test voltage DC 300V or 375V DC 320V or 405V Game consoles, PCs Product supporting abnormal voltage for use in a high temperature range ●Improves safety in regard to DC abnormal overvoltage ●Miniature high ripple current product Cathode foil ø10×20L to ø18×40L 2,000 hours at 105°C 200 to 400V 10 to 220μF Safety function: In the tests, below the pressure valve operated normally, metal parts did not fly off, and there were no shorts or fires. Product size Endurance Rated Voltage Capacitance Safety function Exploded view of fibers in electrolytic paper UCD UCL 16v 220μF ø6.3×7.7L 16v 330μF ø6.3×7.7L 0.16Ω UHW ●Low-impedance product ●Guaranteed for 4,000 to 10,000 hours at 105°C Current limit Test voltage 200 4A （330μF is 5A） DC 300V or 375V Product size 400 2A（100μF以上は4A） DC 500V or 600V Endurance Rated Voltage Capacitance UPW ø5×11L to ø18×40L 4,000 to 10,000 hours at 105°C (ø6.3 to 10V, ø6.3 or less:4,000 hours, ø8.10:6,000 hours, ø12.5 or more:10,000 hours) 6.3 to 100V 0.47 to 18,000μF Miniature ultralow-impedance product for switching power sources [Supports] High ripple current Air conditioners LGW Series Rating Size (mm) Ripple current rating (Arms) 105°C/120Hz LGN 250V/1,500μF ø35×45 2.50 LGW 250V/1,500μF ø35×45 3.75 UCA Miniature long-life product supporting high ripple current UCS ●Supports high ripple current ●Long-life product guaranteed for 12,000 hours at 105°C (some for 10,000 hours) Product size Endurance Rated Voltage Capacitance 05 ø10×16L to ø18×31.5L 12,000 hours at 105°C (ø10: 10,000 hours) 160 to 450V 6.8 to 220μF Nichicon Power Supply and Lighting Applications Catalog LGW LGW Miniature long-life product supporting high ripple current Product size Endurance Rated Voltage Capacitance UCP ●Supports high ripple current ●Products with rated ripple current application guaranteed for 10,000 hours (some for 8,000 hours) Product size Endurance Rated Voltage Capacitance ø10×16L to ø18×35.5L 10,000 hours at 105°C (ø10×16L, ø10×20L:8,000 hours) 160 to 450V 6.8 to 330μF Snap-in terminal type 105°C high ripple current product UCL ø22×25L to ø35×50L 3,000 hours at 105°C 200 to 450V 82 to 2,200μF More compact long-life product for medium to high voltage UUD ø10×31.5L to ø18×46L 10,000 hours at 105°C 400 to 450V 27 to 220μF Chip-type low-impedance product Product size Endurance Rated Voltage Capacitance PCK ø4×5.8L to ø10×13.5L 2,000 hours at 105°C 6.3 to 50V 10 to 2,200μF Conductive polymer aluminum solid electrolytic capacitors Product size Endurance Rated Voltage Capacitance UCD ø6.3×6L to ø10×10L 2,000 hours at 105°C 2.5 to 6.3V 220 to 2,200μF UPA ø10×16L to ø16×35.5L 10,000 hours at 105°C 6.3 to 50V 220 to 15,000μF Chip-type low-impedance product ø4×5.8L to ø10×10L 2,000 hours at 105°C(ø6.3 or less:2,000 hours) 6.3 to 50V 1 to 1,500μF Chip-type low-impedance product Endurance Rated Voltage Capacitance RL8 ø4×5.8L to ø18×16.5L 5,000 hours at 105°C (50V or less, less than 10L:2,000 hours;63V or more, 10L or less:2,000hours) 6.3 to 100V 1 to 3,300μF Conductive polymer aluminum solid electrolytic capacitors Endurance Rated Voltage Capacitance UCM ø8×8L 2,000 to 5,000 hours at 105°C 2.5 to 35V 100 to 1,500μF Miniature ultralow-impedance product for switching power sources ø8×11.5L to ø18×31.5L 5,000 hours at 105°C (ø8: 3,000 hours, ø10:4,000 hours) 6.3 to 35V 180 to 18,000μF Chip-type low-impedance product ●Surface-mounted low-impedance product ●Applicable to automatic mounting machine fed with carrier tape Product size Endurance Rated Voltage Capacitance PCJ ø4×5.8L to ø10×10L 2,000 hours at 105°C 6.3 to 50V 10 to 2,200μF Conductive polymer aluminum solid electrolytic capacitors ●Product with low ESR, high capacity, high permissible ripple current ●Surface-mounted type： Supports lead-free soldering reflow conditions to 260°C peak Product size Endurance Rated Voltage Capacitance RS8 ●Low ESR in a high-frequency zone ●High permissible ripple current Product size Endurance Rated Voltage Capacitance ø5×11L to ø16×25L 6,000 hours at 105°C (ø6.3 or less:5,000 hours) 6.3 to 35V 47 to 8,200μF ●Impedance even lower than UPW ●Surface-mounted low-impedance product ●Applicable to automatic mounting machine fed with carrier tape ●Product with low ESR, high capacity, high permissible ripple current ●Surface-mounted type： Supports lead-free soldering reflow conditions to 260°C peak Product size Endurance Rated Voltage Capacitance Rated Voltage Capacitance ●Surface-mounted low-impedance product ●Applicable to automatic mounting machine fed with carrier tape Product size ●Supports high ripple current ●Long-life product guaranteed for 10,000 hours at 105°C Product size Endurance Rated Voltage Capacitance ø4×7L to ø25×50L 8,000 hours at 105°C (ø4,5,6.3:2,000 hours, ø8:3,000 hours, ø10:5,000 hours, ø12.5:7,000 hours) 6.3 to 450V 0.47 to 15,000μF Low-impedance product for switching power sources Endurance Product size Product size Endurance Rated Voltage Capacitance ●Surface-mounted low-impedance product ●Applicable to automatic mounting machine fed with carrier tape ●Supports high ripple current ●Products with rated ripple current application guaranteed for 3,000 hours LGN LGN LGN ・When 7.5Arms (105°C 120Hz) is required, the number of parts used can be reduced by using LGW Endurance Rated Voltage Capacitance We reduce the number of capacitors needed by employing high ripple current products. Reduction in Number of Users Product size Size reduction makes it possible to improve storage efficiency and save space Product size ●Broadly cuts high-frequency impedance ●Miniature high ripple current product ●Low-impedance product ●Rated ripple current application Guaranteed for 2,000 to 8,000 hours at 105°C Nichicon Power Supply and Lighting Applications Catalog Smaller with higher capacity than the UCL Series 0.16Ω Low-impedance product for switching power sources ●Broadly cuts high-frequency impedance ●Miniature high ripple current product Achieves 25–50% lower impedance than the previous product (UCD Series) 0.32Ω UCM Miniature low-impedance highly reliable product Spec example 16v 220μF ø6.3×7.7L Structure Capacitor elements UHE DC 500V or 600V Molecular structure of electrolyte Electrolytic paper Test conditions Voltage (V) Low-impedance factors UHV Saving space Electrolytic fluid Series Aluminum base metal Test conditions (UAQ, UAS) Voltage (V) Capacitance (μF) Current limit ●Improves safety in regard to DC abnormal overvoltage ●Miniature high ripple current product Product size Endurance Rated Voltage Capacitance ø22×25L to ø35×50L 2,000 hours at 105°C 200 to 450V 82 to 2,200μF Pressure valve operated normally 60% or more of the time and no shorts or fires occurred during application of DC current at 1.5 times the voltage rating and Note: Current limit during application of overvoltage is 1A Low-impedance Greatly reduces impedance, and can support precision products. ●Greater electrode surface area ●Lower loss of electrolytic fluid or electrolytic paper ●Reduces short occurrence during periods of overvoltage (1.5 times the voltage rating ●Products with rated ripple current application guaranteed for 2,000 hours ø22×25L to ø35×45L 2,000 hours at 105°C 200 to 400V 33 to 1,500μF In the tests, below the pressure valve operated normally, metal parts did not fly off, and there were no shorts or fires. Product size Endurance Rated Voltage Capacitance Snap-in terminal type Miniature product supporting overvoltage at 105°C [Supports] ø5×6L to ø10×12.7L 2,000 hours at 105°C 2.5 to 16V 33 to 2,700μF Conductive polymer aluminum solid electrolytic capacitors ●Low ESR and low ESL in a high-frequency zone ●High permissible ripple current Product size Endurance Rated Voltage Capacitance ø6.3×8L 2,000 to 5,000 hours at 105°C 2.5 to 16V 100 to 1,200μF Nichicon Power Supply and Lighting Applications Catalog 06