ALUMINUM ELECTROLYTIC CAPACITORS MP 5mmL, Bi-Polarized series Bi-polarized series with 5mm height. Compliant to the RoHS directive (2011/65/EU). MP MA Bi-polarized Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 0.1 to 47µF Rated Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.05CV or 10 (µA), whichever is greater. Measurement frequency : 120Hz at 20°C 6.3 0.24 Rated voltage (V) tan δ (MAX.) Tangent of loss angle (tan δ) 10 0.20 16 0.17 25 0.17 35 0.15 50 0.15 Measurement frequency : 120Hz 6.3 4 8 Rated voltage (V) Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) Z– 25°C / Z+20°C Z– 40°C / Z+20°C 10 3 6 25 2 4 35 2 3 50 2 3 Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C with the polarity inverted every 250 hours. Shelf Life After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on black sleeve. Capacitance change tan δ Leakage current Radial Lead Type Sleeve (Sleeve P.E.T.) (P.E.T.) Within ± 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Type numbering system (Example : 10V 33μF) φd 1 φd 2 3 1 24 35 46 57 8 6 79 10 8 11 9 10 11 UMU PM 1P A 13 A3 0 DD D 3 M 3 0D M Configuration Configuration Capacitance tolerance (±20%) (±20%) Capacitance tolerance P±0.5 P±0.5 φ D+0.5 MAX φ D+0.5 MAX 16 2 4 Rated capacitance (33μF) (33μF) Rated capacitance (mm) L+1MAX L+1MAX 15 MIN 15 MIN4 MIN φD 4φ D 54 6.35 P 1.5P 2.0 1.5 2.5 2.0 φ d 0.45 φ d 0.45 0.45 0.45 0.45 4 MIN (mm) Rated voltage Rated (10V) voltage (10V) 6.3 Series name Series name 2.5 0.45 Type Configuration Configuration Pb-free leadwire Pb-free leadwire φD sleeve φ DPb-free PET Pb-free PET sleeve 4 to 6.3 4 to 6.3 DD DD Dimensions V Cap.(μF) 0.10 0.22 0.33 0.47 10.1 2.20 3.30 4.70 100.1 220.1 330.1 470.1 Code 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 6.3 0J 0.5 × 5 6.3 × 5 6.3 × 5 10 1A 28 37 45 0.4 × 5 6.3 × 5 6.3 × 5 16 1C 17 33 41 0.4 × 5 0.5 × 5 6.3 × 5 6.3 × 5 25 1E 12 23 37 49 0.5 × 5 0.5 × 5 6.3 × 5 35 1V 12 16 27 0.4 × 5 0.5 × 5 0.5 × 5 6.3 × 5 8.4 16 18 29 50 1H 0.4 × 5 0.4 × 5 0.4 × 5 0.4 × 5 0.4 × 5 0.5 × 5 0.5 × 5 6.3 × 5 1.0 2.0 2.8 4.0 8.4 13 17 20 Case size φ D × L (mm) Rated ripple Rated ripple current (mArms) at 85°C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz or more 1.50 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100D Type