CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS L8 Low ESR, Low Profile (φ8) series Ultra Low ESR, High ripple current. Low Profile(Height 8mm). Load life of 2000/5000 hours at 105°C. Radial lead type : Lead free flow soldering condition correspondence. Compliant to the RoHS directive (2011/65/EU). L8 Lower ESR E5 Lower ESR S8 Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 2.5 to 35V Rated Capacitance Range 100 to 1500µF Capacitance Tolerance ±20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Leakage Current ( 2) Endurance Less than or equal to the specified value. After 2 minutes' application of rated voltage at 20°C Test condition 105°C, rated voltage 2000 / 5000Hrs. Capacitance change Within ±20% of initial value before test tan δ 150% or less than the initial specified value ESR( 1) 150% or less than the initial specified value Leakage current ( 2) Less than or equal to the initial specified value 1 ESR should be measured at both of the terminal ends closest to the capacitor body. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. Size List R.V.(V) S.V.( V) 4.0 6.3 16 35 2.8 4.6 7.2 18.4 40.2 100 8×8 8×8 180 8×8 220 8×8 270 8×8 Cap [µF] 330 Stand off Wire(Lead free) 8×8 470 560 Aluminum case [φD×L(mm)] 2.5 (mm) 8×8 8×8 8×8 680 820 8×8 1000 8×8 1200 8×8 1500 8×8 8×8 Dimension table in next page. 8×8 φD×L φd P α 8×8 8×8 0.6 3.5 1.0 8×8 8×8 CAT.8100D CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS L8 series Standard Ratings Rated Voltage Surge Voltage (V) (V) (code) 2.5 (0E) 4.0 (0G) 6.3 (0J) 16 (1C) 35 (1V) 2.8 4.6 7.2 18.4 40.2 Rated Capacitance (µF) Case Size φD×L (mm) tan δ Leakage Current (µA, 2min.) ESR (mΩ, 100kHz) Rated Ripple Current (mArms) 560 8×8 0.12 500 6 6100 RL80E561MDN1□□ FP-2R5RE561M-L8□□ 560 8×8 0.12 500 6 6100 RL80E561MDNASQ□□ FP-2R5RE561M-L8□□-5K 820 8×8 0.12 513 6 6100 RL80E821MDN1□□ FP-2R5RE821M-L8□□ 820 8×8 0.12 513 6 6100 RL80E821MDNASQ□□ FP-2R5RE821M-L8□□-5K 1000 8×8 0.12 625 6 6100 RL80E102MDN1□□ FP-2R5RE102M-L8□□ 1200 8×8 0.12 750 7 6100 RL80E122MDN1□□ FP-2R5RE122M-L8□□ 1500 8×8 0.12 938 7 6100 RL80E152MDN1□□ FP-2R5RE152M-L8□□ 560 8×8 0.12 560 6 6100 RL80G561MDN1□□ FP-4R0RE561M-L8□□ 560 8×8 0.12 560 6 6100 RL80G561MDNASQ□□ FP-4R0RE561M-L8□□-5K 820 8×8 0.12 820 6 6100 RL80G821MDN1□□ FP-4R0RE821M-L8□□ 470 8×8 0.12 592 8 5700 RL80J471MDN1□□ FP-6R3RE471M-L8□□ 470 8×8 0.12 592 8 5700 RL80J471MDNASQ□□ FP-6R3RE471M-L8□□-5K 560 8×8 0.12 706 8 5700 RL80J561MDN1□□ FP-6R3RE561M-L8□□ 560 8×8 0.12 706 8 5700 RL80J561MDNASQ□□ FP-6R3RE561M-L8□□-5K 680 8×8 0.12 857 8 5700 RL80J681MDN1□□ FP-6R3RE681M-L8□□ 820 8×8 0.12 1033 8 5700 RL80J821MDN1□□ FP-6R3RE821M-L8□□ 1000 8×8 0.12 1260 9 5700 RL80J102MDN1□□ FP-6R3RE102M-L8□□ 100 8×8 0.12 320 12 5000 RL81C101MDN1□□ FP-016RE101M-L8□□ 180 8×8 0.12 576 12 5000 RL81C181MDN1□□ FP-016RE181M-L8□□ 220 8×8 0.12 704 12 5000 RL81C221MDN1□□ FP-016RE221M-L8□□ 270 8×8 0.12 864 10 5000 RL81C271MDN1□□ FP-016RE271M-L8□□ 330 8×8 0.12 1056 12 5000 RL81C331MDN1□□ FP-016RE331M-L8□□ 100 8×8 0.12 700 25 3000 RL81V101MDN1□□ FP-035RE101M-L8□□ NICHICON FPCAP : Load life 5000hours. Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.) 16V 270µF Impedance 16V 270 µ F Frequency (kHz) Frequency (kHz) Taping specifications are given in page 26, 27. Please refer to page 3 for the minimum order quantity. CAT.8100D