ALUMINUM ELECTROLYTIC CAPACITORS NT Screw Terminal Type, 105°C Standard series Load life of 5,000 hours (2,000 hours for 10~250V,500V) application of rated ripple current at +105°C. Extended voltage range from 10V up to 500V. Extended range up to φ100 × 250L 2size. Compliant to the RoHS directive (2011/65/EU). NT Smaller High Voltage High Temperature NU Specifications Item NR Performance Characteristics Category Temperature Range – 40 to +105°C (10 to 100V) , – 25 to +105°C (160 to 500V) Rated Voltage Range 10 to 500V Rated Capacitance Range 220 to 1500000µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 5 minutes’ application of rated voltage, leakage current is not more than 3 CV (µA) or 5mA, whichever is smaller. (at 20°C) [C:Rated Capacitance (µF) , V:Voltage(V)] Measurement frequency:120Hz, Temperature:20°C 3 CV φD L 35 51 Tangent of loss angle (tan δ) (MAX) 63.5 76.2 90 100 10 0.65 0.80 0.85 — 1.2 2.0 2.0 2.4 2.4 V 80 to 100 80 to 100 120 100 110 to 130 100 120 to 150 140 to 220 220 • 250 16 0.45 0.6 0.6 — 0.8 1.2 1.2 2.0 2.0 Rated voltage(V) Stability at Low Temperature Impedance ratio ZT/Z20(MAX.) Z – 25°C/ Z+20°C Z – 40°C/ Z+20°C 25 0.4 0.5 0.5 0.65 0.7 0.9 0.9 1.5 1.5 35 3 CV 50 0.25 0.25 0.3 0.35 0.35 0.55 0.55 0.75 0.75 0.3 0.4 0.4 — 0.5 0.7 0.7 1.0 1.0 63 0.25 0.25 — 0.3 0.3 0.5 0.5 0.6 0.6 80 0.2 0.2 — 0.25 — 0.3 0.35 0.4 0.4 160 to 500 8 — 10 to 100 — 12 100 0.12 0.15 — 0.2 — 0.3 0.3 0.3 0.3 160 to 250 350 to 500 0.15 0.2 0.15 0.2 — 0.2 0.2 0.2 0.2 0.2 — 0.2 0.2 0.2 0.25 0.2 0.25 0.2 Measurement frequency : 120Hz Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 5000 hours (2000 hours for 10 to 250V/500V) at 105°C, the peak voltage shall not exceed the rated voltage. Capacitance change tan δ Leakage current Within ±20% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value Shelf Life After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the requirements listed at right. Capacitance change tan δ Leakage current Within ±20% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value Marking Printed with white color letter on black sleeve. Type numbering system Drawing Voltage 250V or less (Example : 250V 3300µF) φ 35 Screw terminal type 1 1 Bottom plate 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 L N T 2 E 3 3 2 MS E Hexagenal headed bolt (M5) 12 12 Mounting bracket bracket Mounting Configuration (φ35) Configuration (φ35) Capacitance Capacitancetolerance tolerance(±20%) (20%) Code 2-leg brackets brackets Code less less 2-leg No N Rated No brackets brackets N Ratedcapacitance capacitance(3300µF) (3300F) Sleeve 10 3.5 + 24 15±0.5 L+3MAX. 6±1 29±1 Rated voltage voltage (250V) Rated (250V) (φ51 (φ51 to to φ100) φ100) Series Series name name Code 3-leg brackets brackets Code less less 3-leg Type 2-leg Type B 2-leg brackets brackets B No N No brackets brackets N 10 45±1 30° 12.7±1 35 +2MAX. Pressure relief vent 7 Voltage 350V or more (Example : 450V 2200µF) 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 L N T 2W 2 2 2 M S E G Configuration Configuration (20%) Capacitancetolerance tolerance(±20%) Capacitance (2200F) Ratedcapacitance capacitance(2200µF) Rated Rated voltage voltage (450V) (450V) Rated Series Series name name Type Type Configuration Configuration Mounting bracket bracket Mounting Case dia. dia. code (φ35) Case code (φ35) Code 2-leg brackets brackets Code less less 2-leg φD φD Code Code No BN No brackets brackets BN C 35 C 35 F 51 (φ51 F 51 (φ51 to to φ90) φ90) 63.5 Code G 63.5 G 3-leg brackets brackets Code less less 3-leg 76.2 2-leg BB H 76.2 H 2-leg brackets brackets BB No JJ 90 BN No brackets brackets 90 BN K 100 K 100 (φ100) (φ100) Code 3-leg brackets brackets Code less less 3-leg No BN No brackets brackets BN Cr Cr (III) ( III) Plating Plating (RoHS (RoHS compliant) compliant) SE SE Dimension table in next page. Resin refer bushing available upon request. Please to page 328 for schematic of dimensions. Please contact to us if PVCless products are required. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS NT series Screw terminal types for φ 51 and larger Screw terminal type for φ 51 and larger Bottom plate Hexagenal headed bolt Sleeve 0° 12 W ±1 D +2MAX. Pressure relief vent S h L+ MAX. T P±2 B H±1 U A±2 ±1 P A±2 T U S ∗B 3-leg brackets for φ90 capacitors have different P hole shapes from the ordinary ones as illustrated P 5 below. Pressure relief vent 30° 5 7 7 Dimension of terminal pitch (W) and length (R) and Nominal dia.of bolt φD W R 51.5 22.0 6 63.5 28.6 6 76.2 31.8 6 90.5 31.8 6 100.50 41.5 10 (mm) Nominal.of bolt α 3 3 3 3 4 M5 M5 M5 M5 M8 Dimensions of mounting bracket (mm) 3-Legs Leg Shape 2-Legs 51 63.5 76.2 90 100 51 63.5 76.2 90 P 32.5 38.1 44.5 50.8 56.3 33.2 40.5 46.5 53 A 38.5 43 49.2 58.5 62 40 46.5 53 59 T 7.5 8.0 7.0 8.0 8.0 6.0 7.0 6.0 6.0 S 5.0 5.0 5.0 5.0 5.0 4.5 4.5 4.5 4.5 U 12 14 14 18 16 14 14 14 14 60 60 60 60 60 30 30 30 30 H 20 25 30 35 36 25 35 35 35 h 15 20 24 25 30 15 20 20 20 φD Symbol ° Dimensions 10V (1A) 16V (1C) Cap. (µF) Size Rated ripple φD × L(mm) (Arms) Cap. (µF) Size Rated ripple φD × L(mm) (Arms) tan δ tan δ 33000 35× 80 4.8 0.65 1.72 LNT1A333MSE 33000 35× 80 5.2 0.45 2.17 LNT1C333MSE 47000 35× 100 6.2 0.65 2.05 68000 51× 80 6.8 0.80 2.47 LNT1A473MSE 47000 35× 100 6.8 0.45 2.60 LNT1C473MSE LNT1A683MSE 68000 51× 80 7.1 0.60 3.12 LNT1C683MSE 100000 51× 100 8.6 0.80 150000 51× 120 10.8 0.85 3.00 LNT1A104MSE 100000 51× 100 9.6 0.60 3.79 LNT1C104MSE 3.67 LNT1A154MSE 150000 51× 120 11.0 0.60 4.64 LNT1C154MSE 220000 63.5× 120 13.2 330000 76.2× 120 15.8 1.20 4.44 LNT1A224MSE 220000 63.5× 120 14.1 0.80 5.00 LNT1C224MSE 2.00 5.00 LNT1A334MSE 330000 76.2× 120 20.6 1.20 5.00 LNT1C334MSE 470000 90× 140 17.0 2.40 5.00 LNT1A474MSE 470000 90× 140 22.1 2.00 5.00 LNT1C474MSE Leakage Current (mA) Code Leakage Current (mA) Code 680000 90× 170 18.4 2.40 5.00 LNT1A684MSE 680000 90× 170 24.0 2.00 5.00 LNT1C684MSE 1000000 90× 220 20.1 2.40 5.00 LNT1A105MSE 1000000 90× 220 26.1 2.00 5.00 LNT1C105MSE 1500000 100× 220 22.1 2.40 5.00 LNT1A155MSE 1500000 100× 250 28.8 2.00 5.00 LNT1C155MSE Rated ripple current (Arms) at 105°C 120Hz CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS NT series Dimensions 25V (1E) 35V (1V) Cap. (µF) Size Rated ripple φD × L(mm) (Arms) Cap. (µF) Size Rated ripple φD × L(mm) (Arms) tan δ tan δ 22000 35× 80 4.9 0.40 2.22 LNT1E223MSE 10000 35× 80 4.7 0.30 1.77 LNT1V103MSE 33000 35× 100 6.2 0.40 2.72 47000 51× 80 8.3 0.50 3.25 LNT1E333MSE 15000 35× 80 5.1 0.30 2.17 LNT1V153MSE LNT1E473MSE 22000 35× 100 5.6 0.30 2.63 LNT1V223MSE 68000 51× 120 10.2 0.50 3.91 100000 LNT1E683MSE 33000 51× 80 7.4 0.40 3.22 LNT1V333MSE 4.74 LNT1E104MSE 47000 63.5× 100 11.5 0.65 150000 63.5× 120 13.8 0.70 51× 100 8.4 0.40 3.84 LNT1V473MSE 5.00 LNT1E154MSE 68000 51× 120 12.3 0.40 4.62 LNT1V683MSE 220000 76.2× 120 17.0 330000 90× 140 20.8 0.90 5.00 LNT1E224MSE 100000 63.5× 120 13.6 0.50 5.00 LNT1V104MSE 1.50 5.00 LNT1E334MSE 150000 76.2× 120 15.1 0.70 5.00 LNT1V154MSE 470000 90× 170 680000 90× 220 22.4 1.50 5.00 LNT1E474MSE 220000 90× 140 17.4 1.00 5.00 LNT1V224MSE 24.2 1.50 5.00 LNT1E684MSE 330000 90× 170 21.3 1.00 5.00 LNT1V334MSE 1000000 100× 220 26.4 1.50 5.00 LNT1E105MSE 470000 90× 220 25.4 1.00 5.00 LNT1V474MSE 680000 100× 250 27.5 1.00 5.00 LNT1V684MSE Leakage Current (mA) Code 50V (1H) (mA) Code 63V (1J) Cap. (µF) Size Rated ripple φD × L(mm) (Arms) tan δ 10000 35× 80 4.9 0.25 2.12 LNT1H103MSE 15000 35× 100 5.5 0.25 2.59 22000 51× 80 6.3 0.25 33000 51× 120 8.0 0.30 47000 63.5× 100 9.9 68000 63.5× 120 12.8 100000 76.2× 120 150000 90× 140 220000 330000 470000 Cap. (µF) Size Rated ripple φD × L(mm) (Arms) tan δ 10000 35× 100 5.0 0.25 2.38 LNT1J103MSE LNT1H153MSE 15000 51× 80 5.9 0.25 2.91 LNT1J153MSE 3.14 LNT1H223MSE 22000 51× 100 6.9 0.25 3.53 LNT1J223MSE 3.85 LNT1H333MSE 33000 63.5× 100 9.4 0.30 4.32 LNT1J333MSE 0.35 4.59 LNT1H473MSE 47000 63.5× 120 11.2 0.30 5.00 LNT1J473MSE 0.35 5.00 LNT1H683MSE 68000 76.2× 120 13.5 0.50 5.00 LNT1J683MSE 16.8 0.55 5.00 LNT1H104MSE 100000 90× 140 17.8 0.60 5.00 LNT1J104MSE 19.5 0.75 5.00 LNT1H154MSE 150000 90× 170 21.0 0.60 5.00 LNT1J154MSE 90× 170 22.0 0.75 5.00 LNT1H224MSE 220000 90× 220 23.7 0.60 5.00 LNT1J224MSE 90× 220 24.3 0.75 5.00 LNT1H334MSE 330000 100× 250 26.1 0.60 5.00 LNT1J334MSE 100× 250 26.1 0.75 5.00 LNT1H474MSE Leakage Current (mA) Code 80V (1K) Cap. (µF) Leakage Current Size Rated ripple φD × L(mm) (Arms) tan δ 35× 80 0.20 4700 6800 35× 100 3.9 0.20 10000 51× 80 5.4 0.20 15000 51× 100 6.4 22000 63.5× 100 8.4 33000 76.2× 100 47000 76.2× 120 68000 90× 140 100000 90× 170 150000 220000 Leakage Current (mA) Code 100V (2A) Leakage Current (mA) Cap. (µF) Code Size Rated ripple φD × L(mm) (Arms) tan δ Leakage Current (mA) Code LNT1K472MSE 2200 35× 80 2.4 0.12 1.40 LNT2A222MSE 2.21 LNT1K682MSE 3300 35× 80 3.3 0.12 1.72 LNT2A332MSE 2.68 LNT1K103MSE 4700 35× 100 3.8 0.12 2.05 LNT2A472MSE 0.20 3.28 LNT1K153MSE 6800 51× 80 5.2 0.15 2.47 LNT2A682MSE 0.25 3.97 LNT1K223MSE 10000 51× 100 6.7 0.15 3.00 LNT2A103MSE 9.9 0.30 4.87 LNT1K333MSE 15000 63.5× 100 7.8 0.20 3.67 LNT2A153MSE 13.4 0.35 5.00 LNT1K473MSE 22000 76.2× 100 9.9 0.30 4.44 LNT2A223MSE 17.0 0.40 5.00 LNT1K683MSE 33000 76.2× 140 12.7 0.30 5.00 LNT2A333MSE 18.6 0.40 5.00 LNT1K104MSE 47000 90× 140 17.0 0.30 5.00 LNT2A473MSE 90× 220 21.6 0.40 5.00 LNT1K154MSE 68000 90× 170 18.2 0.30 5.00 LNT2A683MSE 100× 250 24.8 0.40 5.00 LNT1K224MSE 100000 90× 220 20.6 0.30 5.00 LNT2A104MSE 150000 100× 220 23.4 0.30 5.00 LNT2A154MSE 3.5 1.83 Rated ripple current (Arms) at 105°C 120Hz CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS NT series Dimensions 160V (2C) Cap. (µF) Size Rated ripple φD × L(mm) (Arms) tan δ 200V (2D) Leakage Current (mA) Cap. (µF) Code Size Rated ripple φD × L(mm) (Arms) tan δ Leakage Current (mA) Code 1000 35× 80 1.6 0.15 1.20 LNT2C102MSE 1000 35× 80 1.7 0.15 1.34 LNT2D102MSE 1500 35× 80 2.1 0.15 1.46 LNT2C152MSE 1500 35× 100 2.3 0.15 1.64 LNT2D152MSE 2200 35× 100 2.7 0.15 1.77 LNT2C222MSE 2200 51× 80 2.9 0.15 1.99 LNT2D222MSE 3300 51× 80 3.8 0.15 2.17 LNT2C332MSE 3300 51× 100 3.9 0.15 2.43 LNT2D332MSE 4700 51× 100 4.5 0.15 2.60 LNT2C472MSE 4700 63.5× 100 5.1 0.20 2.90 LNT2D472MSE 6800 63.5× 100 6.8 0.20 3.12 LNT2C682MSE 6800 63.5× 120 7.0 0.20 3.49 LNT2D682MSE 10000 63.5× 120 7.8 0.20 3.79 LNT2C103MSE 10000 76.2× 120 8.2 0.20 4.24 LNT2D103MSE 15000 76.2× 120 9.8 0.20 4.64 LNT2C153MSE 15000 76.2× 140 10.4 0.20 5.00 LNT2D153MSE 22000 76.2× 140 12.5 0.20 5.00 LNT2C223MSE 22000 90× 140 15.1 0.25 5.00 LNT2D223MSE 33000 90× 140 13.4 0.25 5.00 LNT2C333MSE 33000 90× 220 16.6 0.25 5.00 LNT2D333MSE 47000 90× 220 17.2 0.25 5.00 LNT2C473MSE 47000 90× 250 19.9 0.25 5.00 LNT2D473MSE 68000 100× 250 19.2 0.25 5.00 LNT2C683MSE Cap. (µF) Size Rated ripple φD × L(mm) (Arms) tan δ Cap. (µF) Size Rated ripple φD × L(mm) (Arms) tan δ 250V (2E) 350V (2V) Leakage Current (mA) Code Leakage Current (mA) Code 680 35× 80 1.4 0.15 1.23 LNT2E681MSE 330 35× 80 2.1 0.20 1.01 LNT2V331MSEC 1000 35× 100 1.9 0.15 1.50 LNT2E102MSE 470 35× 80 2.8 0.20 1.21 LNT2V471MSEC 1500 51× 80 2.4 0.15 1.83 LNT2E152MSE 680 51× 80 4.1 0.20 1.46 LNT2V681MSEF 2200 51× 100 3.2 0.15 2.22 LNT2E222MSE 1000 51× 80 6.5 0.20 1.77 LNT2V102MSEF 3300 63.5× 100 4.3 0.20 2.72 LNT2E332MSE 1500 51× 100 8.6 0.20 2.17 LNT2V152MSEF 4700 63.5× 120 5.9 0.20 3.25 LNT2E472MSE 2200 51× 120 11.0 0.20 2.63 LNT2V222MSEF 6800 76.2× 120 7.1 0.20 3.91 LNT2E682MSE 2700 63.5× 100 12.7 0.20 2.91 LNT2V272MSEG 10000 90× 140 9.6 0.25 4.74 LNT2E103MSE 3300 63.5× 110 14.4 0.20 3.22 LNT2V332MSEG 15000 90× 170 12.7 0.25 5.00 LNT2E153MSE 3900 63.5× 130 16.8 0.20 3.50 LNT2V392MSEG 22000 90× 220 15.4 0.25 5.00 LNT2E223MSE 0.20 3.84 LNT2V472MSEG 100× 250 17.0 0.25 5.00 LNT2E333MSE 4700 19.8 33000 63.5× 150 76.2× 120 19.7 0.20 3.84 LNT2V472MSEH 63.5× 170 22.7 0.20 4.20 LNT2V562MSEG 76.2× 130 22.2 0.20 4.20 LNT2V562MSEH 76.2× 150 26.2 0.20 4.62 LNT2V682MSEH 76.2× 170 30.3 0.20 5.00 LNT2V822MSEH 90× 150 29.3 0.20 5.00 LNT2V822MSEJ 5600 6800 8200 10000 90× 150 32.4 0.20 5.00 LNT2V103MSEJ 12000 90× 190 36.0 0.20 5.00 LNT2V123MSEJ 15000 90× 220 42.9 0.20 5.00 LNT2V153MSEJ 22000 100× 250 48.0 0.20 5.00 LNT2V223MSEK Rated ripple current (Arms) at 105°C 120Hz CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS NT series Dimensions 400V (2G) Cap. (µF) Size Rated ripple φD × L(mm) (Arms) tan δ 450V (2W) Leakage Current (mA) Cap. (µF) Code Size Rated ripple φD × L(mm) (Arms) tan δ Leakage Current Code (mA) 220 35× 80 1.6 0.20 0.88 LNT2G221MSEC 220 35× 80 1.8 0.20 0.94 LNT2W221MSEC 330 35× 80 2.3 0.20 1.09 LNT2G331MSEC 330 35× 100 2.4 0.20 1.15 LNT2W331MSEC 470 35× 100 3.1 0.20 1.30 LNT2G471MSEC 470 51× 80 3.4 0.20 1.37 LNT2W471MSEF 680 51× 80 4.2 0.20 1.56 LNT2G681MSEF 680 51× 100 4.4 0.20 1.65 LNT2W681MSEF 1000 51× 80 6.6 0.20 1.89 LNT2G102MSEF 1000 51× 100 7.0 0.20 2.01 LNT2W102MSEF 1500 51× 120 9.1 0.20 2.32 LNT2G152MSEF 1500 51× 120 9.2 0.20 2.46 LNT2W152MSEF 2200 63.5× 100 11.5 0.20 2.81 LNT2G222MSEG 2200 63.5× 110 11.8 0.20 2.98 LNT2W222MSEG 2700 63.5× 110 13.1 0.20 3.11 LNT2G272MSEG 63.5× 130 13.8 0.20 3.30 LNT2W272MSEG 3300 63.5× 130 15.4 0.20 3.44 LNT2G332MSEG 76.2× 110 14.5 0.20 3.30 LNT2W272MSEH 63.5× 150 17.9 0.20 3.74 LNT2G392MSEG 63.5× 150 16.5 0.20 3.65 LNT2W332MSEG 76.2× 110 18.2 0.20 3.74 LNT2G392MSEH 63.5× 170 20.7 0.20 4.11 76.2× 130 20.3 0.20 76.2× 150 23.7 0.20 76.2× 170 27.6 0.20 3900 3300 76.2× 130 17.1 0.20 3.65 LNT2W332MSEH LNT2G472MSEG 3900 63.5× 170 18.3 0.20 3.97 LNT2W392MSEG 4.11 LNT2G472MSEH 4700 76.2× 150 21.7 0.20 4.36 LNT2W472MSEH 4.49 LNT2G562MSEH 76.2× 190 26.4 0.20 4.76 LNT2W562MSEH 4.94 LNT2G682MSEH 4700 5600 6800 90× 150 26.9 0.20 4.94 8200 90× 170 31.0 0.20 5.00 10000 90× 190 32.9 0.20 12000 90× 220 38.3 0.20 15000 100× 220 44.5 0.20 Cap. (µF) 500V (2H) Size Rated ripple tan δ φD × L(mm) (Arms) 5600 90× 150 24.1 0.20 4.76 LNT2W562MSEJ LNT2G682MSEJ 6800 90× 170 28.3 0.20 5.00 LNT2W682MSEJ LNT2G822MSEJ 8200 90× 190 32.5 0.20 5.00 LNT2W822MSEJ 5.00 LNT2G103MSEJ 10000 90× 220 35.1 0.20 5.00 LNT2W103MSEJ 5.00 LNT2G123MSEJ 12000 90× 230 39.2 0.20 5.00 LNT2W123MSEJ 5.00 LNT2G153MSEK 15000 90× 250 45.6 0.20 5.00 LNT2W153MSEJ Leakage Current (mA) Code 330 51× 80 2.7 0.20 1.21 LNT2H331MSEF 470 51× 80 3.2 0.20 1.45 LNT2H471MSEF 680 51× 100 4.2 0.20 1.74 LNT2H681MSEF 1000 51× 120 5.5 0.20 2.12 LNT2H102MSEF 1500 63.5× 110 7.1 0.20 2.59 LNT2H152MSEG 2200 63.5× 130 9.3 0.20 3.14 LNT2H222MSEG 2700 63.5× 150 11.0 0.20 3.48 LNT2H272MSEG 76.2× 130 11.0 0.20 3.48 LNT2H272MSEH 63.5× 170 12.9 0.20 3.85 LNT2H332MSEG 76.2× 150 13.0 0.20 3.85 LNT2H332MSEH 76.2× 150 14.1 0.20 4.18 LNT2H392MSEH 76.2× 190 17.2 0.20 4.59 LNT2H472MSEH 90× 150 16.3 0.20 4.59 LNT2H472MSEJ 3300 3900 4700 2700 5600 90× 150 17.8 0.20 5.00 LNT2H562MSEJ 6800 90× 170 20.7 0.20 5.00 LNT2H682MSEJ 8200 90× 220 25.5 0.20 5.00 LNT2H822MSEJ 10000 90× 250 29.9 0.20 5.00 LNT2H103MSEJ Rated ripple current (Arms) at 105°C 120Hz Frequency coefficient of rated ripple current Frequency (Hz) Coeff. 10to 100V 160to 250V 350to 500V 60 0.90 0.88 0.82 120 1.00 1.00 1.00 360 1.08 1.08 1.20 1k 1.15 1.15 1.35 10k or more 1.15 1.20 1.40 CAT.8100D