Datasheet - Petermann

PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13
D-86899 Landsberg am Lech
Fon: +49/8191/305395
Fax: +49/8191/305397
www.petermann-technik.com
info@petermann-technik.com
ISO 9001:2008
OCXO-25SMD
FEATURES
Pb-free
RoHS-2 2011/65/EU
compliant






High reliability for low cost
Aging of ± 0.001ppm/day in compact package using SC-Cut crystals
Extended temperature range to -40/+75°C available
Short warm-up time and excellent retrace behaviour
Low power consumption and excellent phase noise parameters
AT-cut and SC-cut based designs
GENERAL DATA
SERIES
OCXO-25SMD
PACKAGE
25.4 x 22.0 x 13 mm³
FREQUENCY RANGE
2.0 ~ 100.0 MHz
FREQUENCY ACCURACY
±0.2 ppm (control voltage centered)
VS. AGING AT-CUT
±0.002 ppm/day / ±0.3 ppm/first year / ±2 ppm/10 years
VS. AGING SC-CUT
±0.001 ppm/day / ±0.1 ppm/first year / ±0.5 ppm/10 years
FREQUENCY
VS. LOAD
±0.01 ppm / load change of ±10 %
STABILITY
VS. SUPPLY VOLTAGE
±0.01 ppm / supply voltage change of ±5 %
VS. TEMPERATURE
See table 1
SHORT TERM STABILITY
1x10E-11/s (10MHz SC)
OPERATING TEMPERATURE RANGE
0/+50°C ~ -40/+75°C
STORAGE TEMPERATURE RANGE
-40/+100°C
SUPPLY VOLTAGE
+3.3VDC / +5.0VDC
3.6 W max. during warm-up / 1.2 W max. when static
CURRENT CONSUMPTION
AT-CUT
±0.2 ppm <3 minutes
WARM-UP TIME
SC-CUT
±0.1 ppm <3 minutes
FREQUENCY
AT-CUT
±3.0 ppm
CONTROL RANGE
SC-CUT
±0.7 ppm
CONTROL VOLTAGE
0 ~ 3.3 VDC, 0 ~ 5 VDC
SLOPE
POSITIVE
LINEARITY
±10%
-120 dBc/Hz
10 Hz
100 Hz
-140 dBc/Hz
PHASE NOISE
(10MHz)
1 kHz
-145 dBc/Hz
10 kHz
-150 dBc/Hz
OUTPUT SIGNAL AND LOAD CHARACTERISTICS See table 2
OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION
CRYSTALS
CERAMIC FILTERS
OSCILLATORS
SAW COMPONENTS
CERAMIC RESONATORS
Premium Quality by
PETERMANN-TECHNIK
Spec.01 • REV.00 • August 2013
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13
D-86899 Landsberg am Lech
Fon: +49/8191/305395
Fax: +49/8191/305397
www.petermann-technik.com
info@petermann-technik.com
ISO 9001:2008
TABLE 1- FREQUENCY STABILITY VS. TEMPERATURE
CODE
FREQUENCY STABILITY VS. TEMPERATURE
A
B
C
D
E
F
±50ppb for AT-CUT
±5ppb for SC-CUT
±100ppb for AT-CUT
±10ppb for SC-CUT
±100ppb for AT-CUT
±30ppb for SC-CUT
TEMPERATURE RANGE
0/+50°C
0/+50°C
-20/+70°C
-20/+70°C
-40/+75°C
-40/+75°C
TABLE 2 - OUTPUT WAVEFORM AND LOAD CHARACTERISTICS
OUTPUT
WAVEFORM
OUTPUT
TYPE CODE
SINE WAVE
S
2.000 ~ 30.000 MHz F: FUNDAMENTAL
10.000 ~ 100.000 MHz
O: OVERTONE
Load: 50 Ω
Output level: >2dBm
Harmonic : < -25dBm
Noise Suppression: <- 75dBm
H
2.000 ~ 30.000 MHz F: FUNDAMENTAL
10.000 ~ 100.000 MHz
O: OVERTONE
Load: 15PF TYP/50 PF Max. available
“1“ level: > 0.9VDD; “0“ level: <0.1VDD
Duty cycle: 45/55
Rise/fall time: <6ns(fn<40MHz)
<3ns(fn>40 MHz)
L
2.000 ~ 30.000 MHz F: FUNDAMENTAL
10.000 ~ 100.000 MHz
O: OVERTONE
Load: 15PF TYP/50 PF Max. available
“1“ level: > 0.9VDD; “0“ level: <0.1VDD
Duty cycle: 45/55
Rise/fall time: <6ns(fn<40MHz)
<3ns(fn>40 MHz)
HCMOS
LVCMOS
FREQUENCY
RANGE
OSCILLATION
STATE
OUTPUT
CHARACTERISTICS
OUTLINE DRAWING OF OCXO-25SMD
CRYSTALS
CERAMIC FILTERS
OSCILLATORS
SAW COMPONENTS
CERAMIC RESONATORS
Premium Quality by
PETERMANN-TECHNIK
Spec.01 • REV.00 • August 2013
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13
D-86899 Landsberg am Lech
Fon: +49/8191/305395
Fax: +49/8191/305397
www.petermann-technik.com
info@petermann-technik.com
ISO 9001:2008
REFLOW SOLDER PROFILE
ORDERING INFORMATION
OC25-5-S-D-10.000MHz-S
OUTPUT WAVEFORM
TYPE
S-SINE WAVE / H-HCMOS /
L-LVCMOS
OC14 / OC20 / OC25 / OC36 / OC50
VDD
OUTPUT TYPE - FREQUENCY
3 for 3.3 Volt/ 5 for 5 Volt/ 12 for 12 Volt
See Table 2
CRYSTAL CUT
FREQUENCY STABILITY
See Table 1
A for AT-CUT / S for SC-CUT
PLEASE INDICATE YOUR REQUIRED PARAMETERS
CRYSTALS
CERAMIC FILTERS
OSCILLATORS
SAW COMPONENTS
CERAMIC RESONATORS
Premium Quality by
PETERMANN-TECHNIK
Spec.01 • REV.00 • August 2013