PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com MINIATURE LOW COST SMD-VCTCXO SERIES “VCTXO“ FEATURES + + + + + + High reliability for low cost Cheapest available SMD-VCTCXO Available in 1.8, 2.6, 2.8, 3.0 and 3.3 VDC (1.7-3.5 VDC) New standard for low cost SMD-VCTCXOs Qualified for automotive applications Extended temperature range to -40/+85°C available PB FREE / ROHS-2 2011/65/EU COMPLIANT GENERAL DATA PARAMETERS PRODUCT FEATURES AND CONDITIONS SMD-OSCILLATOR SERIES VCTXO PACKAGE FREQUENCY RANGE VTXO2016 2.0 x 1.6x 0.6 mm3 VTXO2520 2.5 x 2.0x 0.8 mm3 VTXO3225 3.2 x 2.5 x 0.9 mm3 VTXO2016 13.0 ~ 52.0 MHz VTXO2520 9.6 ~ 52.0 MHz VTXO3225 9.6 ~ 52.0 MHz OPERATING TEMPERATURE RANGE -10/+60°C ~ -40/+85°C STORAGE TEMPERATURE RANGE -55/+125°C STANDARD FREQUENCY 13 / 19.2 / 20 / 25 / 26 / 30 / 32 / 38.4 / 40 / 52 MHz SUPPLY VOLTAGE (VDD) +1.8V / +2.6V / +2.8V / +3.0V / +3.3V +1.5 mA max. (f ≤ 26 MHz) CURRENT CONSUMPTION +2.0 mA max. (f > 26 MHz) OUTPUT LEVEL 0.8 Vp-p min. (Clipped Sinewave / DC-coupled) OUTPUT LOAD 10kΩ // 10pF FREQUENCY STABILITY INITIAL TOLERANCE ± 1.5 ppm max. (after 2 reflows) VS. TEMPERATURE ± 2.0 ppm max. / -30~+85°C ± 2.5 ppm max. / -40~+85°C Other parameters are available on request VS. SUPPLY VOLTAGE ± 0.2 ppm max. (VDD±5%) VS. LOAD VARIATION ± 0.2 ppm max. (10kΩ // 10pF±10%) VS. AGING ±1.0 ppm max. / year Start–up Time 2.0 ms max. Phase Noise [f ≤ 15MHz] [15<f≤26MHz][26MHz<f≤40MHz] Offset 100Hz -115dBc/Hz -110dBc/Hz -105dBc/Hz Offset 1kHz -135dBc/Hz -130dBc/Hz -125dBc/Hz Offste 10kHz -145dBc/Hz -140dBc/Hz -135dBc/Hz Offset 100kHz -145dBc/Hz -145dBc/Hz -145dBc/Hz DELIVERY FORM Tape and Reel / 2.000 pcs. per reel, lower QTY possible OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 1 OF 6 I SPEC 01 I REV.00 I JULY 2015 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com OUTLINE DRAWING OF VTXO2016 OUTLINE DRAWING OF VTXO2520 OUTLINE DRAWING OF VTXO3225 CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 2 OF 6 I SPEC 01 I REV.00 I JULY 2015 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com TEST CIRCUIT CLIPPED SINEWAVE (GROUND STANDARD VERSION) TEST CIRCUIT CLIPPED SINEWAVE (OUTPUT ENABLE VERSION) REEL SOLDER PROFILE CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 3 OF 6 I SPEC 01 I REV.00 I JULY 2015 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com REEL SPECIFICATION OF VTXO2016 REEL SPECIFICATION OF VTXO2520 REEL SPECIFICATION OF VTXO3225 CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 4 OF 6 I SPEC 01 I REV.00 I JULY 2015 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com ORDERING INFORMATION SERIES VTXO2016 VTXO2520 VTXO3225 SUPPLY VOLTAGE 33/ 30/ 28/ 26/ 18 FREQUENCY TEMPERATURE RANGE OUTPUT SIGNAL 32.000MHz or ON REQUEST W=-40°/+85°C K=-30°/+85°C M=-20°/+70°C BLANK= 0°/+70°C Clipped Sinewave VTXO2520-18-2.5-E-W-32M-1-CSW TEMPERATURE STABILITY 2.5 or ON REQUEST STAND-BY FUNCTION BLANK=Without E/D Function E=With E/D Function AGING 1=±1.0 ppm max. per year EXAMPLE: VTXO2520-18-2.5-E-W-32M-1-CSW PLEASE INDICATE YOUR REQUIRED PARAMETERS CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 5 OF 6 I SPEC 01 I REV.00 I JULY 2015 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com PREMIUM QUALITY BY PETERMANN-TECHNIK OUR COMPANY IS CERTIFIED ACCORDING TO ISO 9001:2008 IN OCTOBER 2013 BY THE DMSZ CERTIFIKATION GMBH. THIS IS FOR YOU TO ENSURE THAT THE PRINCIPLES OF QUALITY MANAGEMENT ARE FULLY IMPLEMENTED IN OUR QUALITY MANAGEMENT SYSTEM AND QUALITY CONTROL METHODS ALSO DOMINATE OUR QUALITY STANDARDS. © PETERMANN-TECHNIK GmbH 2015. The information contained herein is subject to change at any time without notice. PETERMANN-TECHNIK owns all rights, title and interest to the intellectual property related to PETERMANN-TECHNIK's products, including any software, firmware, copyright, patent, or trademark. The sale of PETERMANN-TECHNIK products does not convey or imply any license under patent or other rights. PETERMANNTECHNIK retains the copyright and trademark rights in all documents, catalogs and plans supplied pursuant to or ancillary to the sale of products or services by PETERMANN-TECHNIK. Unless otherwise agreed to in writing by PETERMANN-TECHNIK, any reproduction, modification, translation, compilation, or representation of this material shall be strictly prohibited. CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 6 OF 6 I SPEC 01 I REV.00 I JULY 2015