Datasheet 2.5 VDC - Petermann

PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13
D-86899 Landsberg am Lech
Fon: +49/8191/305395
Fax: +49/8191/305397
www.petermann-technik.com
[email protected]
ISO 9001:2008
SMD SPXO 5.0x3.2mm 2.5 VDC MHz
FEATURES






Pb-free
RoHS-2 2011/65/EU
compliant
High reliability for low cost
Low-priced SMD-clock-oscillator
Frequency stability from ±20 to ±100 ppm available
Supply voltage of 1.8, 2.5, 2.8, 3.3 and 5.0 VDC deliverable
New standard for small low cost oscillators
Extended temperature range -40°C to +105°C
GENERAL DATA
SMD-OSCILLATOR SERIES
PACKAGE
FREQUENCY RANGE
FREQUENCY STABILITY
OPERATING TEMPERATURE RANGE
STORAGE TEMPERATURE RANGE
VOLTAGE
INPUT
CURRENT
SXO25-05032
Ceramic package 5.0 x 3.2 x 1.2 mm³
1.0 ~ 160.0 MHz
-10/+60°C ~ -10/+70°C
±20~ ±100 ppm
-20/+70°C ~ -40/+85°C
±25 ~ ±100 ppm
-40/+105°C
±50 ~ ±100 ppm
The frequency stability containts the frequency tolerance at 25°C, the temperature stabilty, supply voltage change and load change.
The aging is ±3ppm max. per year.
-10/+60°C ~ -40/+105°C
-55/+125°C
+2.5 VDC ±10%
1.0 ~ 4.0 MHz=10 mA max.
4.0 ~ 45.0 MHz=30 mA max.
45.0 ~ 112.0 MHz=45 mA max.
112.0 ~ 160.0 MHz=90 mA max.
Lower input currents are available on request.
Please indicate the special value when required.
STANDARD
40/60%
OPTION
45/55%
RISE AND FALL TIME
5ns typical /10ns max.
"0" LEVEL
0.4 V max.
TTL 2.5 VOLT
OUPUT "1" LEVEL
+2.4 V min.
"0" LEVEL
10% VDD min.
CMOS 2.5 VOLT
"1" LEVEL
90% VDD max.
TTL
1 ~ 5 TTL
LOAD
CMOS
15 pF max.
STANDARD
WITHOUT ENABLE / DISABLE FUNCTION
PIN 1
OPTION
WITH ENABLE / DISABLE FUNCTION
DELIVERY FORM
Tape & Reel / 1.000 pcs. per reel, lower QTY possible
OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION
SYMMETRY
CRYSTALS
CERAMIC FILTERS
OSCILLATORS
SAW COMPONENTS
CERAMIC RESONATORS
Premium Quality by
PETERMANN-TECHNIK
Spec.01 • REV.00 • August 2013
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13
D-86899 Landsberg am Lech
Fon: +49/8191/305395
Fax: +49/8191/305397
www.petermann-technik.com
[email protected]
ISO 9001:2008
OUTLINE DRAWING
TEST CIRCUIT FOR CMOS
TEST CIRCUIT FOR TTL
OUTPUT WAVE FORM CMOS
OUTPUT WAVE TTL LOAD
CRYSTALS
CERAMIC FILTERS
OSCILLATORS
SAW COMPONENTS
CERAMIC RESONATORS
Premium Quality by
PETERMANN-TECHNIK
Spec.01 • REV.00 • August 2013
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13
D-86899 Landsberg am Lech
Fon: +49/8191/305395
Fax: +49/8191/305397
www.petermann-technik.com
[email protected]
ISO 9001:2008
REFLOW SOLDER PROFILE
REEL SPECIFICATION
PIN1 ENABLE/DISABLE
ENABLE / DISABLE FUNCTION
PIN #1 (E/D CONTROL)
OPEN
HIGH "1" (VIH >70%VDC)
LOW "0" (VIL <30%VDC)
OUTPUT DISABLE TIME
OUTPUT ENABLE TIME
PIN #3 (OUPUT)
ACTIVE
ACTIVE
HIGH IMPEDANCE
150 ns max.
10 ms max.
CRYSTALS
CERAMIC FILTERS
OSCILLATORS
SAW COMPONENTS
CERAMIC RESONATORS
Premium Quality by
PETERMANN-TECHNIK
Spec.01 • REV.00 • August 2013
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13
D-86899 Landsberg am Lech
Fon: +49/8191/305395
Fax: +49/8191/305397
www.petermann-technik.com
[email protected]
ISO 9001:2008
ORDERING INFORMATION
Series &
Voltage
Symmetry
PIN1
Frequency
Stability
SXO25-05032
B*=40/60%
or
S=45/55%
B*= NO E/D
or
E = E/D
B*= 100ppm
or
O=20~50ppm
Temperature
Range
Options
B*= 0+70°C
N=-10+60°C
M=-20+70°C
W=-40+85°C
Y=-40+105°C
Frequency
Delivery
Form
27.000 MHz
T
Example: SXO25-05032-S-E-50-W-27.000MHz-T
PLEASE INDICATE YOUR REQUIRED PARAMETERS
*B=BLANK, S=SPECIAL, E=ENABLE/DISABLE, O=OPTION, T=TAPE AND REEL
CRYSTALS
CERAMIC FILTERS
OSCILLATORS
SAW COMPONENTS
CERAMIC RESONATORS
Premium Quality by
PETERMANN-TECHNIK
Spec.01 • REV.00 • August 2013